i have been working on a project to find out what is the best weapon to beat down hookers with and i think i ave found it good sir. thank you for your enlightenment.
try walling the inside with a cylinder made of think placstic tight to the wire, and then use that to safe guard anything u put in from touching the coil and gettign stuck
"I wrapped the magnet in tape so that I wouldnt short anything out, yet im mashing my fingers all over the wire". Now I understand the top rated comment! Additionally, of course its vibrating, I would wager a guess and say its vibrating at roughly 60 hertz...
My son plays with something toy called Hexbugs that vibrates and moves. If the legs are bent at different angles it will move in different ways. I believe the spin is actually caused by the fold in the tape around the magnets.
Try putting the longer stack of magnets in the way it doesn't spin, then disconnect the plug, and then the wall cord the other way and see if the magnet begins to spin because the ground wire and the line wire is reversed.
@PaladinPK I really want to try that. I have some actually. Comparing ferrofluid in a Rodin coil versus ferrofluid in a normal coil would shed some light on the differences in electromagnetic fields. Please subscribe!
put some mercury in the middle and see how it effects it. mercury because it's a liquid metal and I like to relate this type of weird science to the Nazi Bell who in WWII was transporting large amounts of mercury for some reason. I'm just curious. I have built two coils as well but have never hooked them up. I don't have enough knowledge on the setup just yet. Just a thought
An actual STARGATE/PORTAL-THING was captured on film. The footage can be found within the short-film entitled "SUDDEN PORTHOLE", which is currently parked at the PROJECT CAMELOT YouTube page (it's under the George Noory video).
I'm not selling anything...I'm just trying to spread the word about the unseen-dimensions we find ourselves embedded in.
My BLOG contains the peripheral data regarding the movie and is where I reply to the "debunkers" (use search words "Sam Zurick" & "BLOG"). THANKS!!
@LoveTehSun He's not running it from a battery, he has it hooked up to an electrical outlet along with his lamp. It's NOT safe. The precaution that should be taken is not doing this, lol.
Without sounding offensive, I'm just trying to learn, what is the purpose of this device? Perhaps in larger scale use, not just a miniature one for fun.
Imagine if you get a metal doe nut slightly bigger than the rodin coil cut it in half and place one half of it on top of the coil.will it float or spin.best metal shaped in a lathe trying steel ali all sorts ,you can make the middle like a small shaft,all sorts of shapes to try.would love to play with these toys but not enougth time have hundreds of copper wire contactor coils if I ever did,out of forklift panels were scrapping
@CliveSinclairZX ya i hear ya buddy it seams like no one follows rodin's math! following his math the best winding is to take a torus and divide into 9 divisions, on the first winding start at division 1 cross under torus to the 3rd division following an every other pattern until it returns to division 1, that is 1 turn, proceed to make 9 more turns (or 18 or 24 or 27, as long as it is a multiple of 3) then for the 2nd winding start at division 2 and follow pattern, 3rd division 3rd winding.
Today we were messing with one (18 awg 9 total turns per channel) and were testing the ambient field with LEDs. The multimeter was on the fritz so no idea officially how much voltage was making it out. I believe an interesting experiment would be to test a ripple effect with multiple rodins being powered by the ambient field of a single one.
@jadon1979 I don't exactly understand. How were you testing the ambient field with LEDs? What was your setup? And what do you mean by a "ripple effect"?
@teddybear114 There's a field around the rodin that will activate other coils. You could effectively setup a relay with multiple coils to multiple different channels. We were doing this with a 9v 300ma adapter though. Based on all the videos involving spheres and the Rodin coil I believe the effect would be much better at 12v as this seems to be around the range the vortex stabilizes. The Ripple effect - think of the 5 on a playing card. Powered Rodin in the middle.
@teddybear114 I wish I could post links here. We took a spool that had a few feet of 30 awg wire. Alligator clipped it to an LED and hovered the spool over the rodin. The setup was just the rodin by itself , the spool, and the led offset from the spool. There was no core or any other influences. It lit the LED. There was no amp draw from doing this. So I'm going to setup an array of coils around it, pass it back to a 555 PWM and pulse the rodin using that! It.. will... work.
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. Making a 6kW generator will cost $1200 in mass production, value of the energy produced yearly $5400.
The buzzing is actually tuning into a radio frequency.
If you had tuned the coil correctly, you could turn it into a speaker and hear music rather than a buzz.
Because the magnet isn't spinning, the energy is trying to release in the form of spin in some other fashion. In this case, the energy spins in the form of a radio frequency.
If an equal centrifugal and centripetal force is released like John Searl's SEG, the coil wouldn't get hot or vibrate, but rather would get colder and stay silent.
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
@TheTruthPusher yes a second coil that is not connected to electricity but has a light connected the light will glow if you put the two coils together
Yes but the juice going through the first coil, can it be used too? That is, if I have the primary leading to some useful load, like running a light, can I run a second load, like another light, completely free from the secondary coil?
I think I was asking if I could run a light bulb from electricity which is first sent through a primary coil, and then use that coild as an induction coil at the same time, and get some free ju ju from a secondary?
@teddybear114 Just wondering if you tried wrapping the copper the other direction so the vortex would seemingly spin the magnet the opposite direction??? Cool vid!
What happens when you place the magnet outside of the donut ? I think the field is similar, but less concetrated outside. It should vibrate still and perhaps try to walk around the coil perimeter or be deflected away from the donut and do nothing but vibrate. Hang it on a string to reduce friction to see what it wants to do. Also what happens if you put the magnet inside the donut? (I know ...not possible without damaging it).
Interesting that you magnets spin around the vertical axis. It appears as though your magnets are sort of a trapezoid shape, I wonder if this is why it spins in the vertical. I guess that will be known after further testing with other magnets. Nice work on your coil btw.
personally I wouldn't have such a crazy electromagnetic field near my computer. But that's just me
lexlether 4 hours ago
OMG THIS IS JUST WHAT I WAS LOOKING FOR!!!
i have been working on a project to find out what is the best weapon to beat down hookers with and i think i ave found it good sir. thank you for your enlightenment.
Apocalypticocelot 1 day ago
don't be a subwhore man
MrGabapovich 1 day ago
primitive vibrator?
scarfire87 3 days ago
So.... what is the point of this?
emptyhate 4 days ago
DONT TOUCH IT!!!!! 0:30 hehe right? what would have happened if he touched it. :/
liredragon95 5 days ago
your a wizard harry,
Happyboys2011 5 days ago
so thats what the inside of a vibrator looks like?
eindhovengorecity 6 days ago
Sounds Like DubStep...
2305674 6 days ago
YOU HAVE A NEW IDEA ABOUT A NEW ELECTRIC MOTOR I THINK,WORK MORE ON THIS THING YOU STUMBLE ON, AND TRY TO PATENT IT
TheNeokorben 1 week ago
Try it with a sphere magnet, it might spin and you could attach it to a generator
ThatUslessMan 1 week ago
@ 3:12 and thus the vibrator was created..
emilio9831 1 week ago
I know thats coted wire...... but i still wouldent just go stiking my hang nail in that thing.... just saying.
OLEMINER49ER 1 week ago
I'd rather watch smosh
TheParalyzer923 1 week ago
I got here from minecraft :P
MrHomzar 1 week ago
your mom finds the vibration very interesting
matthewgress 1 week ago
2:10
matthewgress 1 week ago
try walling the inside with a cylinder made of think placstic tight to the wire, and then use that to safe guard anything u put in from touching the coil and gettign stuck
andrew1jl 1 week ago
put those magnetic balls in from the neocube
andrew1jl 1 week ago
you have now shown me how to create a car without using an engine or a motor. thank you
BWKeegan 2 weeks ago
at 1:50 thats what she said
austenlangford 2 weeks ago
it is future technology for vibrators
angelo80230 2 weeks ago 3
Is your computer safe that close? (Magnetism)
nope426 2 weeks ago
ДАЛЬШЕ ЧТО ДРУЗКИ АМЕРИКАНО
MyVadim111 2 weeks ago
This has been flagged as spam show
htt p://ww w.stea mpow ers.net ?joi n=2 719 8 free steam games
ebennett365 2 weeks ago
4:30 turn captions on it says evelyn does a vibrator that looks fairly treated
MrLilc337 2 weeks ago
TURN CAPTIONS ON !!!!!!!! AAHAHAHAHAH
MrLilc337 2 weeks ago
I subscribed to unsubscribe...
bassie52 2 weeks ago
This was a Waste OF your And MY TIME..... KILL YOUR SELF.. :-)
vormanator 3 weeks ago
LMAO put captions on
Jacklikeswaffles 3 weeks ago
"I wrapped the magnet in tape so that I wouldnt short anything out, yet im mashing my fingers all over the wire". Now I understand the top rated comment! Additionally, of course its vibrating, I would wager a guess and say its vibrating at roughly 60 hertz...
oaney 3 weeks ago
GET TO THE FRIKIN POINT!!! WRITE IT DOWN NEXT TIME!!! JEEESS.
amurican35 3 weeks ago
Put ferro fluid in the middle. i wanna see something cool!
bigsupercandy98 3 weeks ago
OMG its howard wolowitz!!!
chrisbryanprods 3 weeks ago
How did i get here? i started at belly button piercings!!
MsSupernova1000 3 weeks ago
Put metal ring around penis. Entire weekend is spent.
PatchworkParamedic 3 weeks ago
What happens if you flip the coil, does it spin then? It might be just cause one surface makes it vibrate more and thus spinning.
Sajmonwins 4 weeks ago
Did you ever get shocked by 120v to know what it feels like? ;)
SuperDevastetor 4 weeks ago
what is the point of this?
Linqua2112 1 month ago
dumbass nerd.
plasticspastic201 1 month ago
My son plays with something toy called Hexbugs that vibrates and moves. If the legs are bent at different angles it will move in different ways. I believe the spin is actually caused by the fold in the tape around the magnets.
prionsviro 1 month ago
WHAT HAVE YOU BEEN FEEDING THOSE MAGNETS!?!?
Sihgilanu 1 month ago
Well done you invented the brushless AC motor. Wait what am I missing here?
streaky08 1 month ago
so are you claiming free energy?
superdiza 1 month ago
idoit
cptkirk2007 1 month ago
thats what she said
(look below)
WilburGraphics 1 month ago
"it's strongly vibrating and it's not going in"..
ip0dh4ck3r 1 month ago
You have GOT to put that thing in ferrofluid.
TheCaphits 1 month ago
the force is powerful with this one.
alex8277 1 month ago
so i was watching nail tutorials, how did i get here :')
BuzzishBeauty 1 month ago
Try putting the longer stack of magnets in the way it doesn't spin, then disconnect the plug, and then the wall cord the other way and see if the magnet begins to spin because the ground wire and the line wire is reversed.
southernexposure123 1 month ago
Now go play in the tub with it.
cliff0495 1 month ago
Vibration are from the ac switching.
rdallas81 1 month ago
dont use AC dude...DC
shukfahid 1 month ago
Try a double torus one on top of thee other
Thedevontree 2 months ago 3
@Thedevontree That's an excellent idea. Thanks for commenting, feel free to subscribe.
teddybear114 1 month ago 10
@teddybear114 Such an average comment WTF
superbloody24 1 day ago
James Clerk Maxwell would find this very interesting.
colt4667 2 months ago
So you are using the lamp as a ballast?
legogunguy001 2 months ago
@legogunguy001 Yes, I was using it as a current limit just so I would not draw a ton of current. Please subscribe!
teddybear114 1 month ago
Fill the inside of the donut with Ferro fluid
PaladinPK 2 months ago 14
@PaladinPK I really want to try that. I have some actually. Comparing ferrofluid in a Rodin coil versus ferrofluid in a normal coil would shed some light on the differences in electromagnetic fields. Please subscribe!
teddybear114 1 month ago
@teddybear114 Then put it in the fridge, and you'll get antigravity ...:)
superdiza 1 month ago
try to add a bearing...
qmig1 2 months ago
Waste OF YOUR time dude
vormanator 2 months ago
Put a cylender over it put a rare earth magnet in the middle and it will start spining
MsAmberjoy 2 months ago
I would like to see a rare earth magnet (sphere or cylinder) place inside this coil;
Try both axial and radial magnetized cylinder magnets.
Very interesting.
macmen007 2 months ago
it spins on one side due to the imperfect tape. if the tape was identical to the other side it would act the same.
1983phizzle 2 months ago
put some mercury in the middle and see how it effects it. mercury because it's a liquid metal and I like to relate this type of weird science to the Nazi Bell who in WWII was transporting large amounts of mercury for some reason. I'm just curious. I have built two coils as well but have never hooked them up. I don't have enough knowledge on the setup just yet. Just a thought
selfawareness333 2 months ago
That's totally what she said
SirBob202 2 months ago
Isn't that a bit dangerous
tylerj19797 3 months ago
This has been flagged as spam show
An actual STARGATE/PORTAL-THING was captured on film. The footage can be found within the short-film entitled "SUDDEN PORTHOLE", which is currently parked at the PROJECT CAMELOT YouTube page (it's under the George Noory video).
I'm not selling anything...I'm just trying to spread the word about the unseen-dimensions we find ourselves embedded in.
My BLOG contains the peripheral data regarding the movie and is where I reply to the "debunkers" (use search words "Sam Zurick" & "BLOG"). THANKS!!
peopledick 3 months ago
What kind of battery are you using? Is it safe to use it? What precautions should be taken when using it?
LoveTehSun 4 months ago
Comment removed
MaaveMaave 3 months ago
This has been flagged as spam show
@LoveTehSun He's not running it from a battery, he has it hooked up to an electrical outlet along with his lamp. It's NOT safe. The precaution that should be taken is not doing this, lol.
MaaveMaave 3 months ago
Without sounding offensive, I'm just trying to learn, what is the purpose of this device? Perhaps in larger scale use, not just a miniature one for fun.
AntwonVonLederhosen 6 months ago
Imagine if you get a metal doe nut slightly bigger than the rodin coil cut it in half and place one half of it on top of the coil.will it float or spin.best metal shaped in a lathe trying steel ali all sorts ,you can make the middle like a small shaft,all sorts of shapes to try.would love to play with these toys but not enougth time have hundreds of copper wire contactor coils if I ever did,out of forklift panels were scrapping
princeofswine 7 months ago
Much safer to put a lower voltage through at 500mA you'll get the same power through.
Spargue 9 months ago
I have a question, what happens when you have the magnet fixed stationary and the coil is lowered on top of it?
HarryFelker 9 months ago
you sure put a lot of faith in that enamel.
bnewton81 10 months ago 43
This has been flagged as spam show
it seams very interesting but I dont why this film has problemd of stream
romano444 1 year ago
The new winding pattern needs to be done!!! I want to see it with the new winding! With the interlaced doubling circuits!
CliveSinclairZX 1 year ago
@CliveSinclairZX which new winding pattern? The Randy Powell design?
teddybear114 1 year ago
@teddybear114 Yes.
CliveSinclairZX 1 year ago
@CliveSinclairZX ya i hear ya buddy it seams like no one follows rodin's math! following his math the best winding is to take a torus and divide into 9 divisions, on the first winding start at division 1 cross under torus to the 3rd division following an every other pattern until it returns to division 1, that is 1 turn, proceed to make 9 more turns (or 18 or 24 or 27, as long as it is a multiple of 3) then for the 2nd winding start at division 2 and follow pattern, 3rd division 3rd winding.
thefarmfred1 10 months ago
Today we were messing with one (18 awg 9 total turns per channel) and were testing the ambient field with LEDs. The multimeter was on the fritz so no idea officially how much voltage was making it out. I believe an interesting experiment would be to test a ripple effect with multiple rodins being powered by the ambient field of a single one.
jadon1979 1 year ago
@jadon1979 I don't exactly understand. How were you testing the ambient field with LEDs? What was your setup? And what do you mean by a "ripple effect"?
teddybear114 1 year ago
@teddybear114 There's a field around the rodin that will activate other coils. You could effectively setup a relay with multiple coils to multiple different channels. We were doing this with a 9v 300ma adapter though. Based on all the videos involving spheres and the Rodin coil I believe the effect would be much better at 12v as this seems to be around the range the vortex stabilizes. The Ripple effect - think of the 5 on a playing card. Powered Rodin in the middle.
jadon1979 1 year ago
@jadon1979 That sounds quite interesting, I will have to try it. Did you guys get any interesting results?
teddybear114 1 year ago
@teddybear114 I wish I could post links here. We took a spool that had a few feet of 30 awg wire. Alligator clipped it to an LED and hovered the spool over the rodin. The setup was just the rodin by itself , the spool, and the led offset from the spool. There was no core or any other influences. It lit the LED. There was no amp draw from doing this. So I'm going to setup an array of coils around it, pass it back to a 555 PWM and pulse the rodin using that! It.. will... work.
jadon1979 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. Making a 6kW generator will cost $1200 in mass production, value of the energy produced yearly $5400.
I am looking for $6M for a prototype and patents.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
Comment removed
nombredeusuario1423 1 year ago
Do you think this coil can be used as an induction heater??
ParapaDrifter 1 year ago
@ParapaDrifter Yea, possibly. I'm sure with thicker wire, and more current, it could work as an induction heater.
teddybear114 1 year ago
@teddybear114 i need to find me some of those kiddy plastic rings!
ParapaDrifter 5 months ago
@ParapaDrifter You can find them at ToysRus or Online from the Fisher Price website.
teddybear114 5 months ago
buy some ferro fluid! hat would be awesome to see what the field looks like!
tiltfulll 1 year ago
@tiltfulll Yea, I should be getting an order of Ferrofluid soon. I'll let you know when I try it out. Subscribe!
teddybear114 1 year ago
What do u mean? I already made the video. U didn't even watch all the video?
kosolouch 1 year ago
The buzzing is actually tuning into a radio frequency.
If you had tuned the coil correctly, you could turn it into a speaker and hear music rather than a buzz.
Because the magnet isn't spinning, the energy is trying to release in the form of spin in some other fashion. In this case, the energy spins in the form of a radio frequency.
If an equal centrifugal and centripetal force is released like John Searl's SEG, the coil wouldn't get hot or vibrate, but rather would get colder and stay silent.
TheRealVerbz 1 year ago
i wonder what would happen if you built a larger one and placed a hydrogen cell in the middle of it?
advancedhydrogen 1 year ago
how come you don't get shocked from touching the coil. with 120 volts ac
purplewolfpimp 1 year ago
Try using Pulsed Direct Current, you may get some interesting effects.
SergeHumphrey 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
So what are you saying?
We can now spin mags effortlessly?
Or can a second coil be excited by it?
TheTruthPusher 1 year ago
@TheTruthPusher yes a second coil that is not connected to electricity but has a light connected the light will glow if you put the two coils together
braddo12345 1 year ago
@braddo12345
Yes but the juice going through the first coil, can it be used too? That is, if I have the primary leading to some useful load, like running a light, can I run a second load, like another light, completely free from the secondary coil?
TheTruthPusher 1 year ago
@TheTruthPusher I don't understand your question.
teddybear114 1 year ago
@teddybear114
i DON'T UNDERSTAND IT EITHER, HA HA HA
I think I was asking if I could run a light bulb from electricity which is first sent through a primary coil, and then use that coild as an induction coil at the same time, and get some free ju ju from a secondary?
TheTruthPusher 1 year ago
@TheTruthPusher The electricity has to come from somewhere, so that would just be induction and not free energy.
teddybear114 1 year ago
@teddybear114 Just wondering if you tried wrapping the copper the other direction so the vortex would seemingly spin the magnet the opposite direction??? Cool vid!
mma208king 1 year ago
Please Subscribe and Comment. I'll be doing more experiments soon. If anyone has anything they want me to try just send me a message.
teddybear114 1 year ago
OH SHI~! Guy, i love you:)
eugenyj111 1 year ago
!!!
Kywdo 2 years ago
what happens if you place it on top of your head?
philx100 2 years ago
Haha, I have no idea.
teddybear114 2 years ago
What happens when you place the magnet outside of the donut ? I think the field is similar, but less concetrated outside. It should vibrate still and perhaps try to walk around the coil perimeter or be deflected away from the donut and do nothing but vibrate. Hang it on a string to reduce friction to see what it wants to do. Also what happens if you put the magnet inside the donut? (I know ...not possible without damaging it).
definitionofis 2 years ago
looks like a good coil , got the spaacing just right it seams to create a stronger field ..
STiELzephyr 2 years ago
Interesting that you magnets spin around the vertical axis. It appears as though your magnets are sort of a trapezoid shape, I wonder if this is why it spins in the vertical. I guess that will be known after further testing with other magnets. Nice work on your coil btw.
Wavefront101 2 years ago