so uh it looks like you are doing something physical and random with some contacts. you need to eliminate this and build an electronic circuit to emulate what you are doing with your hands so its entirely standalone.
I did this a while ago, so I don't remember all the bends, (also note that this thing died about week after this).
One of my main bends I know was to what I think was an oscillator on one of the corners of the board. This, combined with various bends on some of the IC pins (there were about two or three that gave good results), were what gave me most of my results. I plan on bending another furby soon, so maybe I can point out the bends I'm talking about.
Indeed, where did you find these bends??? I only know the glitch and loop ones. I didn't try too hard to find these because I know they're easy to fry. I'm trying to make a case for a controller for the thing, and I want more than two bends. Could you make a video about where you soldered your wires for these other bends?
It reminds me of the way a radio is, when you keep turning it and stuff to change the channels. I've seen someone change the Furby and hook it up to a joystick, perhaps something related to a radio could be done someday. O_o
sounds a bit like furby went out, took lots of drugs and got really drunk and this is him in the morning when he has just got up with a hangover trying to have a civallised convo lol. Nice work btw sounds neat
basicly its like rewireing the veins or the circuit board. if one wire was bent to go to this other wire, your interrupting the original a-b and making it a-c or w/e
What switches have you attached to the circuit and where? I know about the loops switch, and a locking switch. But could I please have a brief explination of your components?
And that warbling sound at 0:22, is that just it looping, or a variable resistor/potentiometre/something else?
OMFG I CAN SERIOUDLY HEAR VOICES IN THAT THING LIKE FROM A RADIO....plus as few times I heard the furby deep inside that ball of circuits say something...
you can make dubstep with furby? :o
SirAthen690 1 month ago
Someone made it like a Schindler 330a nudge
MasterOfMonopoly 1 month ago
Since when did Furby speak Dubstep?
OddishThing18 3 months ago
Sounds like a 56k (or 14.4 for classic) modem.
Johnevans1985 4 months ago
"Bend"?
ZaffireWolf 1 year ago
Negativland presents fad-driven consumer culture.
JohnFordDanceTroupe 1 year ago
This thing is staring at my soul and twisting my mind.
PanekPL 1 year ago
Dear god, that thing is going to haunt my nightmares forever. Thanks.
It's staring...
Just staring...
porygonlover322 1 year ago
ITS ALIIIIIIVE
Kiroswan 1 year ago
so uh it looks like you are doing something physical and random with some contacts. you need to eliminate this and build an electronic circuit to emulate what you are doing with your hands so its entirely standalone.
cobrachoppergirl 2 years ago
I did this a while ago, so I don't remember all the bends, (also note that this thing died about week after this).
One of my main bends I know was to what I think was an oscillator on one of the corners of the board. This, combined with various bends on some of the IC pins (there were about two or three that gave good results), were what gave me most of my results. I plan on bending another furby soon, so maybe I can point out the bends I'm talking about.
aqme28 2 years ago 2
Indeed, where did you find these bends??? I only know the glitch and loop ones. I didn't try too hard to find these because I know they're easy to fry. I'm trying to make a case for a controller for the thing, and I want more than two bends. Could you make a video about where you soldered your wires for these other bends?
Thanks!
ThatBum5 2 years ago
shoot me a message, how did you wire it, this is dope
HELPTHEHOMELESS32 2 years ago
I think you've broke it, supposed to make it better, not worse.
agenteighty 2 years ago
LOOOL, sometimes it sounds so DRUNK! xD
What exactly happens if you touch the pins of the clock crystal?
nrdesign1991 2 years ago
OK, i found out by doing it myself (I'm bending a Furby myself now)
nrdesign1991 2 years ago
that is no doubt the creepiest thing I have ever seen. Imagine waking up in the middle of the night to THAT.
askeyol 2 years ago 3
lmfao XDD That would be so terrible
hyperchica 2 years ago
haha oh god! furbish!
CaptianAppel 2 years ago
MY EARS!!!
SallyTheLilkinz 2 years ago
1:52 he said coco xD
Gadge96 3 years ago
it means 'again', i think
nrdesign1991 2 years ago
It reminds me of the way a radio is, when you keep turning it and stuff to change the channels. I've seen someone change the Furby and hook it up to a joystick, perhaps something related to a radio could be done someday. O_o
QuirkyTycoon 3 years ago
It sounds like you ate its spleen and brain wiht salt.
BBQLays45 3 years ago 2
HOW DARE U TAKE THE FURBY APART
randomeness1123 3 years ago
sounds a bit like furby went out, took lots of drugs and got really drunk and this is him in the morning when he has just got up with a hangover trying to have a civallised convo lol. Nice work btw sounds neat
fagAshLil1234 3 years ago 4
It sounds like youre killing Wall•E.
Karmavs 3 years ago 26
Sounds like a Mac.
kookoo4cocoapuffs 3 years ago
the voice or the startup sound
Tyler11440 3 years ago
i tryed to do that BUt my bater pack fell off
heartagram112894 3 years ago
It sounds like it's mumbling gibberish at the beginning.
xXKariBananaXx 3 years ago
It's interesting all the different results that come out with each circuit bending of furby :D
GaaraFoshaara 3 years ago 3
OMG that is friggin hilarious
kl4nger 3 years ago
Sounds like R2D2 on speed.
cydonius99 3 years ago 3
XD lol, R2D2 on speed, that is so true
Imashii 3 years ago
This is disturbing on more than one level...
redmess22 3 years ago
lol Wowrry lol
BOOBOO3976 3 years ago
what does Circuit-bent mean?
is it like hacking the system?
Groobie 3 years ago
basicly its like rewireing the veins or the circuit board. if one wire was bent to go to this other wire, your interrupting the original a-b and making it a-c or w/e
chazum0 3 years ago
"No. I think it's screaming."
EMike07 3 years ago
Ha! At 0:30, sounds like he's moaning!
ADS19922011 3 years ago
And another poor furby... R.I.P
Lordodragonss 3 years ago
do u have a map of the bend for that?
if so would it be possible to send to me
richslayerbc08 3 years ago
its communicating with the mothership!!
footboy05 3 years ago 2
Sweet mods!!!
bugfactory999 3 years ago
...it's a broken piece of shit now.
sunuvman 3 years ago
bent not broken
richslayerbc08 3 years ago
WHALE CUM! XD!
ToastmachineIdiot 3 years ago
great mods, lotsa cool sounds there.
bugfactory999 3 years ago
0:20-0:32 sounds like hes gonna throw up XD
Sara94 3 years ago
heh...I want to throw that thing into a kindergarten.
4lligator 4 years ago 4
What switches have you attached to the circuit and where? I know about the loops switch, and a locking switch. But could I please have a brief explination of your components?
And that warbling sound at 0:22, is that just it looping, or a variable resistor/potentiometre/something else?
TheMongod 4 years ago
THIS IS REALLY SCARY.
I bought my first Furby when I was little and it made those noises when I bought it.
D:
rissehx3 4 years ago
is that furby speaking in tounges?lol
circuit bending is something i sohuld get into
ilikeymuzic 4 years ago
Ahaha, looks like R2D2 and C3PO had an orgy with some ewoks!
This shit is disturbing xD But it must be a really fun toy for hackers~
TheRocketVoltage 4 years ago
WHALE CUM XD That's disturbing, these things aren't suitable for children!
B3llit0 4 years ago
whale cum, wtf. XD
Ephitaph 4 years ago
at like 1:07 it sounds like it says "mmmmmmm.... ahhh... whale cum" haha f'kn hilarious
millersayshi 4 years ago 11
hahahaha!! your right!!
tommythetrout 4 years ago
OH SWEET JESUS I always knew these things were possessed. O_o
PS- millersayshi you're so right! And at 1:53 he almost says it again! Or "welcome" lol.
ShadowKitten13 4 years ago 2
@millersayshi Mhmmmm, Kah wah'loo Koh'Koh. - Which would mean Me sleep more / again.
AeroCai 1 year ago
It sounds a bit like playing with a radio by twisting the knob back and forth really fast.
One of the better bent furbies (furbys?)
4/5
ThatBum5 4 years ago
hehe he sounds drunk.
plexiflexi 4 years ago
awesome.
MBRHIndustries 4 years ago
at :35 he makes a normal furby sleeping sound then goes back to spazzing
AVGNNUMBER1FAN2 4 years ago
I just got a furby haha
lol i wonder if peta would be upset
Zeelikestoodance 4 years ago
Furbys are harbringers of death and destruction. This one must be their leader.
pendevil 4 years ago
OMFG I CAN SERIOUDLY HEAR VOICES IN THAT THING LIKE FROM A RADIO....plus as few times I heard the furby deep inside that ball of circuits say something...
Warcaptain722 4 years ago
that thing scares the crud out of me but i like it
Aquacat26 4 years ago
cool. very nice sounds in the beginning.
preoqpyddlusion 4 years ago
woah...
DMXP100 4 years ago
christ u didnt have to skin him alive! LOL!
Nuxunumo 4 years ago
Poor furby!! Oh well....
colesbabe 4 years ago
This is interesting.
bstep13 4 years ago
...but why?!
mrssleazoid 4 years ago
you killed it
]=
lol
jodaelamor 4 years ago 2
refreshing
JJ77TTUU3 4 years ago
very E.T.
greengrendel 5 years ago
YOu should get it talking to another furby
flytape8490 5 years ago
Sweet. Sounds awesome, and a Fruby gets messed up too.
bobthedevastator1 5 years ago
its fun i done it on my sisters - its like taking a screw driver and probing a human brain and see what happens lol
MKUltraProject 5 years ago
Noooooo your killing him *runs away crying* waaaaaagh
puggster 5 years ago
lmao wtf did you do??
bblbuddy 5 years ago