Landyachtz Longboards - Bear Grizzly 852 Trucks

[mrpotatoman1001]

i used to think these trucks were called DEAD 

[Longboardz19]

So these ar great for any type of longboarding

[fearsrampage1313]

uhhh ill just get calibers.

[redpandafreeride]

so wen the # on the truck is facing out its for dh?

[helios893]

@redpandafreeride no exactly if you look closely at the hanger there is a curve. when the bulge of the curve is facing out it is set for carving when the bulge is facing in it is set for downhill.

[DoondaGaga]

does anyone notice the range rover a 0:33

[RNKSoccer]

i used to have original trucks and did anykind of 180 standup slide possible like it was nothing and now when i got these trucks a day ago, its alot harder me to slide, do i need different, softer bushings and will i get used to them?? plz reply

[Fortune2point0]

@RNKSoccer You'll get used to them. Originals are stupid slidy and can't do anything other than that.

[t0000rev]

strait up my bear 180s weigh the same as my randell 150s

[ZDTLONGBOARD4LIFE]

so which way round is better for freeride and high speed slide?

[KevinC0115]

@ZDTLONGBOARD4LIFE freeride- keep it the way it comes. for high speed and DH, flip the hangar definitely

[ZDTLONGBOARD4LIFE]

@KevinC0115 k thanks :)

[TheErikDane]

they are so expensive though

[kaipama]

my bears bent after early grabbing a two set. still love them as a truck but maybe a bit more solid would b nice

[6cmh3]

I have these trucks they are an ok truck. I say this because it rusts easily if you don't treat it well. Other than that it is an awesome truck.

[ZDTLONGBOARD4LIFE]

does flipping the hangar also make it better for freeride?

[thejordan670]

Love these truckes

[RunFaster011]

I thought they said Beaq

[RNKSoccer]

can you carve just as much on these as u can on original trucks?

[WolfSharkk]

these vs 50 calibers for freeride? any opinions?

[GoneGuitaring]

@WolfSharkk Calibers destroy bears. just buy them.

[RNKSoccer]

r these trucks only for dropthroughs?

[soh54321]

@RNKSoccer no there for both topmount and dropthrough. much like any other truck

[RNKSoccer]

@soh54321 THANKS bro

[RNKSoccer]

@soh54321 aww man...

[TheThenintendofan]

Im new to longboarding and wanted to know a little more about it what is the hangar on the trucks

[SuperMoomoo4]

@TheThenintendofan Watch the video they said stuff about flipping the hangar watch for the guy flipping something!

[KyleKid987]

what is the wheels at 0:28 and the board at 0:24 ???? Please help me

Thank you

[GoneGuitaring]

@KyleKid987 the wheels were blue mini monsters, the board was a drop carve i think.

[TeamBoaters]

does anyone else have trouble fitting khiros on them?

[pizzacrustcrumbs98]

if i get the top comment i prommes i will eat my dog

[sapzap96]

I hammered out my king-pins on my bears

[Brownbear712]

How do i know if my bear's are in downhill or carve? ive had them for ages.... i think there in carve. is there any way of telling?

[Puntar7]

@Brownbear712 on mine you can tell there is 3 circles on the freeride side.

[Belbert95]

@Brownbear712 The hanger has steeper angle when in carve

[GoneGuitaring]

@Brownbear712 yeah you can see on one side of the hangar there's three little circles. when circles are facing out i think its on the stable side.

[OHYEAHDUDES]

@GoneGuitaring yeah the 3 little circles signify that its on the stable side :D

[BareTheMark]

can anyone make a vid on how to flip the flipin hanger!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!

if anyone does a vid or knows of one PLEASE help me out.

[almostbog]

@BareTheMark so first you need to know that the hanger is what the wheels are on, then unscrew the kingpin nut, and just flip it over, so say that its your back truck, your back right wheel will now be back left wheel, hope this helped

[LongboardingTips]

canadian borders for the win!!!

[sapzap96]

Bear Trucks with a removable kingpin please???????????

[ElitePoopJerky]

bears or randal 180?

[xboxman100yyy]

i cant decide between the Landyachtz 9Two5 2011 or Landyachtz Bamboo Wedgeflex 2011 HELP

[spartaxl123]

@xboxman100yyy the landyachtz 925 for sure no questions asked because its an overall great board. I own one my self.

[evanbaranek]

where can i buy those green bushings?

[Hoser1358]

@evanbaranek you can't, you have to get them on the trucks, or some random seller on ebay/craigslist/etc.

They're 83.5a and they don't feel that great, better bet to buy some venoms or something

[benisbuxx]

@NFfingerboards no apex 37

[Itakazookie]

@benisbuxx no apex 34

[benisbuxx]

would these fit a dervish

[FreshAsphalt]

I CANT TELL WHAT SIDE IS FOR BOMBING AND WAT SIDE OF THE HANGAR IS FOR CARVING!!!! LANDYATCHZZ HELP MEE I AM CONSTANTLY GETTING WOBBLES

[EvMeloy]

@FreshAsphalt i got these truck, the taller side of truck, or the side if the kingpins are inside the truck construcion is carving side, and the side of kingpins get more outside and your truck makes your board lower is bombing side, bushings helps alot to doesn't get wobbles.

[spencerhopkins91]

christ now im horny......

[sapzap96]

Only problems with Bear trucks is the lack of a removable kingpin (all bushings have a very tight fit in there) and how unturny they are.

[tylerbecker1]

how do you tell if its downhill or cruise?

[RyeRyeBear]

@tylerbecker1 if the number is facing out, youre set for downhill

[hoax3]

just bought some calibers gotta say you get a little more stability and just as much response for the same price but still they bears and cals are the only cast trucks ill ride.

[lukebateman100]

what board at  :25

[elittle1997]

@lukebateman100 time machine

[spenochino11]

@wolfsharkk I have a spud and in my bears I flip the hanger and have an 83a elim board side and a 78a barrel roadside best dh combo IMO for bears

[Hoser1358]

i honestly found these trucks really bad, but i never bothered getting new bushings.

these feel really dead, and unstable... but then again thats my opinion after riding paris trucks for a couple months.

[CamberLongboards]

@Hoser1358 your very right, Thats actually what alot of people say, I dont know if its the bushings or what but I dont like them ,

[WolfSharkk]

any bushing suggestions for this on a wolf shark for a 140 lbs kid?

[hoax3]

@WolfSharkk best freeride set up i find is 80a jimz cone bushings boardside and same duro jimz barrels roadside.

[LuisCamposG7]

i buy these just for my 9two5 and damn they suck with venom bushings making a super anoying sound..

[monkieboi88]

i liked bears alot. but then i rode calibers and bears didnt lean enough

[WolfSharkk]

@monkieboi88 I have bears and my girlfrined just won a set of calibers in a race x.x derp.

[WorthlessCrap]

0:57 hooly shit, i thought the guy in balck was a running bear

[Tubofluxar]

bear trucks are so fucking nice!

[ElevatedPoleCat]

how long are these kingpins?

[awsomeguitar54]

this video makes me wanna punch someone in the face.

[DANIK42095]

@awsomeguitar54 retard

[awsomeguitar54]

@DANIK42095 its cause of the music.

[SuperSTEEZ23]

Sick trucks

[artix117]

when i first saw these trucks i thought it said dead

[Mokukonu]

@artix117 haha when i first saw the trucks, I thought it said BEAQ

[dothedipp]

@artix117

i thought it said beaq hahaha

[tikimojoe]

@artix117 i thaught it said BeeR!!!

[laserlongboards]

these trucks are way better than original

i speak from expirience

[RNKSoccer]

@laserlongboards i hope because i have had original trucks for a year and just ordered these, need some info on bushing and flipping the hanger and stuff like that, but can these carve just as much, with same bushings or venom or smthn. PLEASE RESPOND!!!!!! thanks

[OMFMlongboard]

@RNKSoccer They wont turn as much as Original trucks, but they are lighter and more stable.

[laserlongboards]

@RNKSoccer they have fare potential to be a very carvy truck with the hanger unflipped, i have orange venom cone bushings on road side and bear pumpkin bushing board side they seam to carve pretty well like that

cheers 

[apex37longboards]

A great all around truck, whether your shredding gnar, spreading stoke, or putting some steez on bread

[antonio12344]

so your website has been under construction for over a year get on it!

[MamacrackerJ]

why isnt the site hear yet it stil says coming soon

[Jaaaasssoonnn]

this is a very good truck. have them on my evo and time machine they are amazing

[Kmann2202]

you can flip any hangar on any truck but these are soooooooooooo much better flipped then any other fliped truck. keep it up!

[iLucasLongboarding]

Looks nice

[surfersnowlongboard]

GNARLIEST TRUCK I EVER HAD!

[MattWattsMovies]

best trucks ever, super stable yet freeride great as well!

[twitsz]

if this video is unlisted then why it in my sub box?

[cricri06mtl]

Hey, I think these are my trucks!

[blakedbs102]

the flip able hangers are pretty badass