HOMEMADE LONGBOARD / SHLONGBOARD ver 2.1

[leonardovalb]

a le quedo super pabre que chido

[xmpasb]

Usually the longboard trucks have the old and the new school pattern, so you are not going to have problems if you use the distance between the bolts like in a normal skate.

[julisnansito04]

Forgiveness but my English is not very good. The distance of the screws attached to the truck going (longboard) have the same distance as the truck of a normal skate?

Thanks

[TGBiTuRiXs]

Where did u get those angled trucks?

[TheGees69]

@xmpasb what wheels are those grey ones? the one on the gullwing sidewinders?

[xmpasb]

@TheGees69 Lush Avalanche 70mm 78A

[Amersgton]

tio donde as pillao los elevadores k yo los busco y no encuentro

[f0615388]

@rsniChainSAW So you'd spend over $150 rather then spending $60 for trucks and risers?

[Loady91]

Shlongboard with double kingpin trucks and risers!?! Dude you read my fucking mind! I was gunna conjugate one of those but I wasn't too sure how it would ride. How's it treating you so far?

[xmpasb]

@Loady91 :P If you want an extra carving sensation, go for it!! ... But after a few days you will take your old longboard again! At least that was what happens to me.

This shlongboard is quite funny, but you can't do all the things that you do with an standard longboard (board-walking, sliding, tricks...) and finally it became a little bit boring.

[crappyballmaker]

good job man!

[SwaggerDX]

you dident make a longboard you just drilled new wholes in a skateboard now if you rely wanna make a board go buy some wood/bamboo and some poxy cause thats what your gonna need

[xmpasb]

@SwaggerDX Ok man!! First of all you should read the description of this video "longboard build from a skateboard deck", I'm not saying that i have made the deck!! This was my second longboard, after that one have BUILD a few more, ... and with a production process much more complex that the one that you are explaining.

Maybe you think that you are a very clever guy, ... but the smart people don´t go around telling to the others what to do!! Opinions are welcome, not orders!

[SwaggerDX]

@xmpasb wasent trying to tell you what to do ive made my own and they turned out looking good but skating them well fucking sucked but i did crack my rayne hustler and did replicate it with some tweaks and i skate it all the time

[metalcrash14]

Ah, ostias perdona mi error xD no me fije en que eran de kingpin invertido xD perdon perdon xDD y oye, donde te los has pillado esos ejes y ruedas, me recuerdan a unos de ebay... si los has pillado por internet pasame webshop ;)

[xmpasb]

@metalcrash14 Tranquilo, no pasa nada .... Son unos Gullwing Sidewinder, co doble kingpin para coseguir un giro mas bestia. Los compre en una tienda de Longboard en Barcelona, pero seguro que los podras econtrar por internet!! Las ruedas son unas Lush Avalanche 70mm ideales para carvear. Estos ejes dan una sensacion muy surfera pero no son tan polivalentes como uos tipo Randall, Paris o Holey .....

[metalcrash14]

Tio, pa que le metes elevadores de cuña? con la inclinación de el tail y el nose ganas radio de giro

[xmpasb]

@metalcrash14 Mas bien es todo lo contrario. Sin los elevadores en cuña los ejes quedaban en una posocion demasiado forzada y ni siquiera se movian, con lo que el patin apenas giraba, ... almenos eso es lo que me ha enseñado mi experiencia pèrsonal.

[SuperLongboard10]

looks really nice

[xmpasb]

@SuperLongboard10 Thanks

[candydeca8]

thats tigt man!

[pyro6957]

they handle like landyachtz evos or urban assults

[aivjiol]

how does it ride?

[xmpasb]

@aivjiol Extra carving sensation!! but is better not to ride it in a high speed.

[reddywan]

@xmpasb why?

[aivjiol]

i was thinking about doing this.. then after seeing your video its all i think about.. im so excited lol. thank you for the reassurance!

[xmpasb]

Remember to put a video of your board when you finish!!

[aivjiol]

@xmpasb lol i ended up buying the sector nine drainer instead.. i needed a quick fix haha.. but i havent given up and ill try to get some vids posted ;-]

[midibudu]

donde consigues los elevadores?? y los ejes mas o menos cuanto cuestan??, XD yo me hece uno y se me partio!

[xmpasb]

Donde mejor de precio lo encontraras todo es en internet, Los ejes los compre por ebay (25€la pareja) y los elevadores en una tienda llamada "Inercia" en BCN (tiene tienda on line)

[midibudu]

ok gracias!, jaja, el otro dia vi unas ruedas de skate q parecian oreos!! eran negras por los bordes y blancas en medio, y tenian debujos q parecia una oreo cada rueda!! xD

[MrJABA90]

great work ...

whats the name of the song ??

[xmpasb]

"Don't Make Waves" by The Gossip...... o yeah!!

[marcobarring]

What did u use to draw the lines on the deck so good.

[xmpasb]

Just a metric ruler and lots of patience.........

[marcobarring]

Instead of 1 homemade wood and 1 plastic riser on the trucks. Can I just use 2 plastic risers on each truck? Would that work?

[xmpasb]

Yes of course, even better than the pice of wood and the angled riser.

[xmpasb]

Pues no te lo puedo decir. La verdad es que no la he provado a mucha velocidad pq con los sidewinders no da confianza!! Con unos ejes como los charger, creo que no debe ir mal ya que la tabla es bastante rigida i ademas queda mas baja que una tabla normal, y eso son buenas condiciones para ir a buenas velocidades.

[KaiDune]

what if i choose not to put angled risers on my shlongboard, what trucks do you recommend??

[xmpasb]

@KaiDune First I tried only with a common randall trucks, but the board didn´t turn so much. Then I put the randalls with the angled risers and it turns like a normal longboard. With the sidewinders you have an extreme carving sensation. I think that the sdewinders wihtout the risers will work in a bad position and will not turn as much as they can. I recomend you the trucks that you prefer, but whith angled risers

[marcobarring]

thanx

[marcobarring]

Thank U Very Much

[marcobarring]

Oh and what kind of trucks

[xmpasb]

Gullwing Sidewinders :)

[marcobarring]

Yup can u one more time explain how u did the riser thing with the wood

[xmpasb]

You need a piece if wood with the same dimensions of the base of your trucks. If you want a very low angle you will need a thinner piece o wood, if you want higher angle u will need a thick one. Then draw a diagonal line in one of the side of that wood, and you have to cut following that line. U will obtain a couple of angled riser. Finally you have to drill the holes!!

[marcobarring]

What size wheel did u use

[xmpasb]

Lush Avalanche, 70mm 80A. Do you need Anything else??

[djlapsk123]

sidwinder trucks. awesome... also amazing idea with the wege risers. GENUS KID RIGHT HERE

[xmpasb]

Thank you!

[duby149]

dude that looks so awesome im going to try this but what i want to know is did you cut the spacers it looks like you did

[xmpasb]

First of all, I only used one angle riser in each truck. After using it, I realized that I need to use another angle riser because the trucks did not turn so much. I made the second ones from a pice of wood.

[duby149]

uuuM i dont understand what your saying do you think you can make a vid i dont care if its just pics just need to see what it looks like so i can try do do the same thing

[xmpasb]

Sorry, I realized that I didn't understand your first question.... What do you mean with "cut the spacers"?? Are you talking about the risers that appears between the trucks and the board??

[ItalianAvalanche]

thats fuckin sick!

who's your daddy hahahaha.

Nice job.

[xmpasb]

Thank you!!