lt1 camaro z28 with full exhaust and electric cut out

[wyldcdn]

did not throw any codes, went from 8.03 best in 8th to immediate 7.8 (flowmaster is a choker)

[djghostly1]

so it wont throw any o2 sensors or anything if i put it after the cat right? i dont wanna fail my emissions lol

[djghostly1]

were did you place your cutout i just ordered my qtp and wanted to know were the best place it is to put it? were it wont throw any sensors

[wyldcdn]

face book has pictures of install

under rear passenger seat, inthe floor is a nice dished area it fit into perfectly. I hammered a clearance spot for the motor , ran the wiring thru the body plug under the carpet into the center console

look for the power top button for convertiable. make a great open close switch

[wyldcdn]

send me a request on face book kristian sorenson. good pix of install

[wyldcdn]

thanx

[djghostly1]

that sounds sick man!!!!

[wyldcdn]

stall was great. launched at 1000-1200, used 26x11.5x16 et streets. Improved from 1.9-1.95 60 foots to avg low 1.7's to best of 1.69. No other changes. times went from 7.86 avg. to avg of low 7.6's. Get decent reg street tires thou. I used my old fuzions during a tire swap session. can't get traction under 35mph

[0mykee0]

hey guy how did you like the 2800 stall ? and any launch tips ?

[sctflasher379]

can you do burnouts and doughnuts with a 3500 stall??

[wyldcdn]

yes...why do you ask?

[sctflasher379]

just wondering because i was thinking about getting a 3500 stall for my ss camaro.. what exactly does it do and how does it affect daily driving?

[rich17279]

sounds awesome

[wyldcdn]

thanx

soon tohave new engine and a cam swap (about darn time)

[stunta69]

whats ur set up

[wyldcdn]

built tranny, 3200 stall, 342's lots of bolt ons. Now, since this video

[wildbloodydragon]

drooom...drrrrrrrrrrrrrroooomm­drr...

[wyldcdn]

thanx, nice to hear its better now

[HBM96maro]

what size stall do u have?

[wyldcdn]

this video 2800. Rebuilt the tranny with all TCI guts , new stall coming when new motor goes in. (Feb 2008) Most likely going to a 3500.

[wyldcdn]

update

went to vigilantte 3200 9.5 diameter, 60 foots went to 1.68 from 1.9-1.85's

[wyldcdn]

had a 2800 with stock trans. Rebuilt it with tci internals. Put stock TC in untill feb 2009 when the new motor goes in. Great ride love the look

[1994camaroz28]

Sounds like a beast.

[micah41091]

I love that sound!!

[ATVRider6840]

what kind of exhaust you got on there? sick sound man very nice

[wyldcdn]

shortie headers, aftermarket Y pipe, bolt in cat delete, the cutout and flow master at the end. Vid is cutout open

[camarokayden]

Is it a single cut out? and Where is the cut out located?like afeter the Y-pipe or further down the line?

[wyldcdn]

yes cutout is open, single, mounted at the rear, just before it goes over the axle. )straight across on opposite side where fuel filter is)

[wyldcdn]

one cut out 3" by quick time performance. Its mounted after the cat (If I had one), just before it goes over the axle. Under the car, where the rear right passenger sits, is a perfect spot, the floor allows access for it to tuck up nice and close. Send an email i'll send pix how it fits

[ArmySergeant]

thats exxactly where i have mine installed, it sits perfectly.

[tamimazimi]

does exhaust cutouts give perforance or is it just to make it sound more sick lol and how much to do it and does it hurt the engine ...thanks let me know

[wyldcdn]

went from running 8:05's to 7:86's

[tamimazimi]

how much is it to do it

[cliffabrown]

are those times with tires?

[wyldcdn]

drag radials, M&H race master's

1:80 60 foot. I tried once on street tires, ran a best of 2:1- 2:35's. Needs more work.

[cliffabrown]

u still got a 10 bolt in your car? yeah i get 2.1-2.2's in my 96 TA on street tires (got the gu5 3.23 rear axle A4)....bout to have some pacesetter LT's and y-pipe once i have a free weekend to install. TB + programmer and i'll be at full bolt-ons ;) think it's safe to run DR's on that 10 bolt making that much power? (full bolt-ons)

[pimpjuicepd]

This summer im getting a whole new exhaust.....pacesetter lt's n a magnaflow exhaust. Do you still have the pics of how you mounted your cutout?

[kjb86]

im guessing these passes are with the cut out open??? Is it just a single elctric cut out after the y pipe before the cat???