@GermanSharp1 just a real cro-mo bmx axle. it already came bored through the center .25 of an inch. so it worked out well. just had to do the old musket load when you want to have a good shot. but if your neighborhood is not safe, i would not sugest making an improvised weapon to defeand yourself. you could get in alot of trouble with the law.
@Demo7IIRider thx for the freindly advice, but i live a a large enough property to be able to shoot up too .45 without any complaning. and the naborhood thing im woried about break ins or drive bys, i wouldnt think about takeing it into town
@GermanSharp1 yes you can put regular .22lr, but remember its not a rifled barrel. so it wont be accurate. but in terms of a lead thrower, yep it works.
@hassler555 haha thats actually what i did, and i stood behind my 5ft tool chest. but if you hold the barrel and look at the fit of the ball bearing, theres no way it would break. but tested it anyway just to be sure
That means when you shoot this the bullet will have the same forward force applied to it as the casing has reward, pointing at you. Think about that when you fire that. And I know .22 isn't much, but consider this: .22 caliber is more deadly than some of the larger rounds (9mm) because, instead of ripping through bone, it bounces around.
@gyro231995 trust me i know, thats why the back of the barrel has a locking nut to completely lock the rimfire cartrage from moving. i do own a 12ga and a kimber 1911 so i understand the dangers involved, i wouldnt sugest someone to just wip one together with out any knowlege
@Demo7IIRider Well, it's your ass behind the weapon. And just because you own 2 firearms doesn't mean you know how to build them. I currently use 7 computers but that doesn't mean I know how to build one.
@gyro231995 oh i wasnt trying to have a debate with you, and i never claimed to be a firearms manufacturer this was just a simple experiment at home that i wanted to share with the viewers. there was alot of testing done on just the barrel prior to makeing the fireing mechanism (toy gun). just to make sure that it doesnt fail while doing a test "in hand"
@Demo7IIRider Good to see that you tested. I was just hoping that you actually know what you're doing considering all those dumb asses on YouTube who make a plastic gun held together with duct tape and firing a .38 special or something like that.
@gyro231995 You are a fucking idiot. You don't know what the fuck you are talking about. There would have to be a massive blockage in the barrel to shoot the shell back, and there isn't so go fuck yourself.
@melvinvswaldo Sigh... so many people don't understand such a simple principle. What you're talking about is a barrel explosion. I'm talking about something totally different. Every time a bullet is fired, the bullet is pushed forward with equal force as the casing is pushed backwards. In other words, if someone were to fire a gun at you, and for some reason all the bullet's force was imparted on your gun, the recoil would be the same.
@gyro231995 not taking mass into account, and second the recoil is mostly caused when the bullet leaves the gun and the remainding gasses push off the air outside the system(causing a sort-of thrust). since the bullet is so light in comparason to the fire arm (even tho there will be a slight recoil due to inertia) AND finally if the bullet were to jam lets say, there wouldnt be any recoil because the forces are all contained in the system (or gun) neither the bullet and shell are moving = 0 rec
@Demo7IIRider I don't fully understand what you're saying, but the recoil is completely due to the shot being fired, not the hot gasses expanding. If that were true then the impact forces would be next to nothing because the force of recoil is about equal to the force of impact. Also, if recoil was due to expanding gasses, then why do suppressed weapons have the same recoil as unsuppressed weapons?
@gyro231995 deff do your homework on supressors and watch slow motion plays of recoil. a supressed firearm has much less recoil. why alot of bolt action shooters use suppressors. its not the expanding gas in the barrel that causes recoil its the exiting gass after the bullet leaves the barrel. make a forward thrust pushing the gun back twards you. and the supressor is what absorbs all the "extra" gas which is what reduces the bang sound. but it also unintentionally reduces the recoil too.
@gyro231995 but yea the bullet and mass have its account when it comes to recoil but in this case the mass difference is so little that its considered neglegable. but thankes for your physics talk. but i think most people understand your concept. your just not considering the other major factors.
@Demo7IIRider I am considering all major factors. The exhaust gasses exiting the barrel are negligible. Consider the gun-powered blank cartridge. This is just a normal cartridge without a projectile. Now if you say is correct it should have full (or just about) recoil. However this is not the case. Compare this video [watch?v=GWN7GAazTyo] to this one[watch?v=AwW31u6wYvE&feature=fvwrel] and I think you will see the difference. You also say that the bullet is light compared to the...
@Demo7IIRider ...weapon. That is true, but the gasses escaping are even lighter and moving slower so impart much less force. I know that you will counter this fact with some convoluted argument but it is what it is. As for the bullet, while it is very light, it is moving extremely fast. Using the formula f=ma (remember basic physics?) we can explain why such a light entity can impart such a large force. You also say that bolt action snipers use suppressors to reduce recoil. This...
@gyro231995 ...makes no sense because, as long as it isn't so powerful as to cause physical harm, the recoil of a bolt action rifle doesn't matter because a) the recoil happens after the bullet leaves the barrel; it doesn't affect accuracy, and b) the speed at which you can reload is the limiting factor. Lastly, if the casing being pushed backwards isn't the main cause of recoil then how do recoil operated weapons operate?
@gyro231995 well recoil does matter, it dosent make the gun jump when your sighted in @600+yds. and allows faster followups with out re-adjustment. and most long range cal is .308 and up like .338 lapua, .408 cheyec. even .50bmg. but not too many suppress the .50 (cannon) but there is a whole other science with supressors. but go to a form1 supressor forum. and check out what people say about supressors. its also why ar15 platform needs a adjustable gas line to compensate the backpressure from..
@gyro231995 the supressor. everything youve stated i already know and to me is just regurgitated information. recoil comes from bullet mass, cartrage powerd (or velovity) barrel leinth, weight of weapon. and if in an auto, the recoil-spring and/or mass of bolt carrier. all of these play a factor in recoil. but remember that this is a video to show a simple zipgun can be made. not a physics class. im not going to argue with you nor am i going to debate proven facts.
@gyro231995 i mean i probibly mislead you in what i know because the short comment space of 500 characters, but i was like you and didnt believe supressors reduced recoil. but they do. so i went and done some reading and yea, its correct. but yea im not trying to make you upset or anything, i just want to sare what ive learned, but yea i dont even know how this discussion lead to supressors off a home fab zip gun. but any way, you shoot at all?
@Demo7IIRider Well I guess one of us is right and the other is wrong, and that opinion will be different for each of us. I suppose we should agree to disagree. And I do shoot pretty regularly. Please note, though, that I won't respond anymore, and that this isn't a admittance of defeat.
@thehammernator no the .22 has a good deal of energy, but not enough to break the handle. if you look at other zip gun vids there is no recoil, since the projectile has so little mass
@bigd5000100 OH yea, i shot it in my garage at a box with sheet metal in it, it went through the box and the thin sheetmetal and into my tool chest. :P
@Demo7IIRider wait you shot yourself? ... damn some people are stupid... its a firearm a thin sheet of metal won't save you from being shot.. damn! -.-
@darknessninja02 yea they are supose to be blanks. you just have to go get airsoft pellets or ball bearings and put it infront of the charge. ill post you a pic of how i do it. i just re finished my barrel.
Hey, I was thinking of making something similar, I figured I'd take the barrel from an old airsoft-silencer I had lying around (thing aluminum, about 2.5 - 3mm I think).
Anyways, hadn't thought of the possibility of the barrel exploding really, not from a .22 anyhow.
@porrsmurfen yea it will work, i would start on a smaller charge first. the 4 is pretty powerful and you wouldnt want to have the barrel split open. i would try and find a steel pipe.
i agree that plastic never a good idea when dealing with firearms especialy homemade ones but the way you have it built it is all contained with in the stell bike parts
it's a 22 short, the peaple whu bild zipgun in 22 alwais use stupid big iron pipes, but it's stupid, because cal 22 is too small, you dont need to make a 1kg gun!!!
@caprone83 yea a 22 can blow your fingers of and maby your hand depending on the pipe and thay do all the time so yea but you should be safe with 22 ramset blanks in strong steel
ahahah my names matt to lol and i found a bolt off a bike from a goose kneck bolt really thick and solid and fits 22. i tried tha axle and it probly needed drilling a lil bit so yeee i used goose kneck bolt and i dont reccomend that plastic
A few problems that I can c so far (a) not correct diamiter barrel thus horrible accuracy (B) what u made was a center fireing pin not rim fire so may take a few try to get to go off (C) you used plastic never a good idea when dealing with firearms especialy homemade ones but if it does work and u don't hurt itself have fun try to make a suppressor for it that's what I did to mine
yea i know the plasitc is such a bad idea. but it did work. peirces 1/16 thick steelplate. but yea the accuracy is fair. i mean i didnt buid a barret M95 so.. but i was just bored.
So did u get a specific axel or is it just a bike axel?? I hope mine turns out :) it's not a safe naborhood I live it
GermanSharp1 3 weeks ago
@GermanSharp1 just a real cro-mo bmx axle. it already came bored through the center .25 of an inch. so it worked out well. just had to do the old musket load when you want to have a good shot. but if your neighborhood is not safe, i would not sugest making an improvised weapon to defeand yourself. you could get in alot of trouble with the law.
Demo7IIRider 2 weeks ago
@Demo7IIRider thx for the freindly advice, but i live a a large enough property to be able to shoot up too .45 without any complaning. and the naborhood thing im woried about break ins or drive bys, i wouldnt think about takeing it into town
GermanSharp1 2 weeks ago
@Demo7IIRider one more question will it handle live ammo????
GermanSharp1 2 weeks ago
@GermanSharp1 yes you can put regular .22lr, but remember its not a rifled barrel. so it wont be accurate. but in terms of a lead thrower, yep it works.
Demo7IIRider 2 weeks ago
i want to make a home made gun but im kinda scared, i dont wanna blow my hands off or kill myslef
rizzy137 1 month ago
@rizzy137 yea dont be scared, just show it respect. but yea i got another one comming soon. 9mm !! but using an actual barrel for it this time.
Demo7IIRider 1 month ago
Is it rim fired of center fired?
GTimpact 1 month ago
hey what did you use for the toy gun? was it just a spring airsoft gun?
motorboyz92 3 months ago
umm.. umm... ummm umm umm umm.
Cool video, but words can not express how annoying the "umm" is.
Kayaquee 3 months ago
what are those charge things?
okadaman2 3 months ago
glue, plastic and 22. cal? I must say, you are a brave man if you shoot with this!
deadgoodman 5 months ago
could i make it shoot a .40 cal bullet?
Redcabron1 5 months ago
What make of axle is that?
MrJmak223 5 months ago
tie a string to the trigger to test a hundred times before holding the gun
hassler555 6 months ago
@hassler555 haha thats actually what i did, and i stood behind my 5ft tool chest. but if you hold the barrel and look at the fit of the ball bearing, theres no way it would break. but tested it anyway just to be sure
Demo7IIRider 6 months ago
Every action has an equal and opposite reaction.
That means when you shoot this the bullet will have the same forward force applied to it as the casing has reward, pointing at you. Think about that when you fire that. And I know .22 isn't much, but consider this: .22 caliber is more deadly than some of the larger rounds (9mm) because, instead of ripping through bone, it bounces around.
gyro231995 7 months ago
@gyro231995 trust me i know, thats why the back of the barrel has a locking nut to completely lock the rimfire cartrage from moving. i do own a 12ga and a kimber 1911 so i understand the dangers involved, i wouldnt sugest someone to just wip one together with out any knowlege
Demo7IIRider 7 months ago
@Demo7IIRider Well, it's your ass behind the weapon. And just because you own 2 firearms doesn't mean you know how to build them. I currently use 7 computers but that doesn't mean I know how to build one.
gyro231995 7 months ago
@gyro231995 oh i wasnt trying to have a debate with you, and i never claimed to be a firearms manufacturer this was just a simple experiment at home that i wanted to share with the viewers. there was alot of testing done on just the barrel prior to makeing the fireing mechanism (toy gun). just to make sure that it doesnt fail while doing a test "in hand"
Demo7IIRider 7 months ago
@Demo7IIRider Good to see that you tested. I was just hoping that you actually know what you're doing considering all those dumb asses on YouTube who make a plastic gun held together with duct tape and firing a .38 special or something like that.
gyro231995 7 months ago
@gyro231995 You are a fucking idiot. You don't know what the fuck you are talking about. There would have to be a massive blockage in the barrel to shoot the shell back, and there isn't so go fuck yourself.
melvinvswaldo 3 months ago in playlist More videos from Demo7IIRider
@melvinvswaldo Sigh... so many people don't understand such a simple principle. What you're talking about is a barrel explosion. I'm talking about something totally different. Every time a bullet is fired, the bullet is pushed forward with equal force as the casing is pushed backwards. In other words, if someone were to fire a gun at you, and for some reason all the bullet's force was imparted on your gun, the recoil would be the same.
gyro231995 3 months ago
@gyro231995 not taking mass into account, and second the recoil is mostly caused when the bullet leaves the gun and the remainding gasses push off the air outside the system(causing a sort-of thrust). since the bullet is so light in comparason to the fire arm (even tho there will be a slight recoil due to inertia) AND finally if the bullet were to jam lets say, there wouldnt be any recoil because the forces are all contained in the system (or gun) neither the bullet and shell are moving = 0 rec
Demo7IIRider 3 months ago
@Demo7IIRider I don't fully understand what you're saying, but the recoil is completely due to the shot being fired, not the hot gasses expanding. If that were true then the impact forces would be next to nothing because the force of recoil is about equal to the force of impact. Also, if recoil was due to expanding gasses, then why do suppressed weapons have the same recoil as unsuppressed weapons?
gyro231995 3 months ago
@gyro231995 deff do your homework on supressors and watch slow motion plays of recoil. a supressed firearm has much less recoil. why alot of bolt action shooters use suppressors. its not the expanding gas in the barrel that causes recoil its the exiting gass after the bullet leaves the barrel. make a forward thrust pushing the gun back twards you. and the supressor is what absorbs all the "extra" gas which is what reduces the bang sound. but it also unintentionally reduces the recoil too.
Demo7IIRider 2 weeks ago
@gyro231995 but yea the bullet and mass have its account when it comes to recoil but in this case the mass difference is so little that its considered neglegable. but thankes for your physics talk. but i think most people understand your concept. your just not considering the other major factors.
Demo7IIRider 2 weeks ago
@Demo7IIRider I am considering all major factors. The exhaust gasses exiting the barrel are negligible. Consider the gun-powered blank cartridge. This is just a normal cartridge without a projectile. Now if you say is correct it should have full (or just about) recoil. However this is not the case. Compare this video [watch?v=GWN7GAazTyo] to this one[watch?v=AwW31u6wYvE&feature=fvwrel] and I think you will see the difference. You also say that the bullet is light compared to the...
gyro231995 2 weeks ago
@Demo7IIRider ...weapon. That is true, but the gasses escaping are even lighter and moving slower so impart much less force. I know that you will counter this fact with some convoluted argument but it is what it is. As for the bullet, while it is very light, it is moving extremely fast. Using the formula f=ma (remember basic physics?) we can explain why such a light entity can impart such a large force. You also say that bolt action snipers use suppressors to reduce recoil. This...
gyro231995 2 weeks ago
@gyro231995 ...makes no sense because, as long as it isn't so powerful as to cause physical harm, the recoil of a bolt action rifle doesn't matter because a) the recoil happens after the bullet leaves the barrel; it doesn't affect accuracy, and b) the speed at which you can reload is the limiting factor. Lastly, if the casing being pushed backwards isn't the main cause of recoil then how do recoil operated weapons operate?
gyro231995 2 weeks ago
@gyro231995 well recoil does matter, it dosent make the gun jump when your sighted in @600+yds. and allows faster followups with out re-adjustment. and most long range cal is .308 and up like .338 lapua, .408 cheyec. even .50bmg. but not too many suppress the .50 (cannon) but there is a whole other science with supressors. but go to a form1 supressor forum. and check out what people say about supressors. its also why ar15 platform needs a adjustable gas line to compensate the backpressure from..
Demo7IIRider 2 weeks ago
@gyro231995 the supressor. everything youve stated i already know and to me is just regurgitated information. recoil comes from bullet mass, cartrage powerd (or velovity) barrel leinth, weight of weapon. and if in an auto, the recoil-spring and/or mass of bolt carrier. all of these play a factor in recoil. but remember that this is a video to show a simple zipgun can be made. not a physics class. im not going to argue with you nor am i going to debate proven facts.
Demo7IIRider 2 weeks ago
@gyro231995 i mean i probibly mislead you in what i know because the short comment space of 500 characters, but i was like you and didnt believe supressors reduced recoil. but they do. so i went and done some reading and yea, its correct. but yea im not trying to make you upset or anything, i just want to sare what ive learned, but yea i dont even know how this discussion lead to supressors off a home fab zip gun. but any way, you shoot at all?
Demo7IIRider 2 weeks ago
@Demo7IIRider Well I guess one of us is right and the other is wrong, and that opinion will be different for each of us. I suppose we should agree to disagree. And I do shoot pretty regularly. Please note, though, that I won't respond anymore, and that this isn't a admittance of defeat.
gyro231995 2 weeks ago
@gyro231995 I understand it fully son. I understand it better then you can explain it to me. Thanks though pal.
melvinvswaldo 3 months ago
@gyro231995 Fuck face.
melvinvswaldo 3 months ago
wheres the follow up firing vid bud- i want to see this thing!
mikethenascarfan 7 months ago
to all you haters it dose work i no
deano509 9 months ago
This doesn't work.
Jsmooth7444 10 months ago
now thats what you call and extreeme airsoft mod haha...
ahero971 11 months ago 2
AM ,AND AM AM ANS SO AM
gimortengi 11 months ago 2
Make a suppressor and you are god
kazetehskylord 11 months ago
That's badass! U should spray paint it black
cyguy67 1 year ago
why make a bullet when you can buy them?
bob90968 1 year ago
what are all the suplies you used for this. i wanna make one!
mradams06 1 year ago
did the handle break because it was plastic
thehammernator 1 year ago
@thehammernator no the .22 has a good deal of energy, but not enough to break the handle. if you look at other zip gun vids there is no recoil, since the projectile has so little mass
Demo7IIRider 1 year ago
did it fire????
bigd5000100 1 year ago
@bigd5000100 OH yea, i shot it in my garage at a box with sheet metal in it, it went through the box and the thin sheetmetal and into my tool chest. :P
Demo7IIRider 1 year ago
@Demo7IIRider thats cool ill make one then
bigd5000100 1 year ago
@Demo7IIRider wait you shot yourself? ... damn some people are stupid... its a firearm a thin sheet of metal won't save you from being shot.. damn! -.-
masicklazik 1 year ago
@masicklazik tool chest, not his chest...
hilers72652 1 year ago
how to made a gun
pabliton1001 1 year ago
Would have never thought about the home depo charges and the ball barings lol thats great good job.
bestfilmz 1 year ago
@bestfilmz yea i was in the garage and found 1 charge and thought i could totally make a gun. and 3 hours later viola!
Demo7IIRider 1 year ago
u woodnt think a .22 cood blow open sum1s hand but surrprizingly they can go about 1.5m miles
pyropaintball1313 1 year ago
i fired my shotgun insode my room X) but it was an accident haha.. did it fire good after yu shot it??
dreamz20091 1 year ago
ok i shall andd cool
darknessninja02 1 year ago
i got themmmmm!!!!!!! but i think the are blanks well they look like like but i dont care haha im 13 and they sold them to me
darknessninja02 1 year ago
@darknessninja02 yea they are supose to be blanks. you just have to go get airsoft pellets or ball bearings and put it infront of the charge. ill post you a pic of how i do it. i just re finished my barrel.
Demo7IIRider 1 year ago
Comment removed
darknessninja02 1 year ago
@darknessninja02 if you go to the area that has nail guns. they have a fair selection and differnt sizes/power
Demo7IIRider 1 year ago
@Demo7IIRider holy cheese balls i want 50 call lllols ok cool thanx man
darknessninja02 1 year ago
@darknessninja02 yea, i mean if you go online you can get 12 gauge blanks. if you need more power :P
Demo7IIRider 1 year ago
Comment removed
zritikaldamage 1 year ago
What is the name of those charges?
airgunner12 1 year ago
@airgunner12 i use the level 4 nail gun charges. you can find them in any home depot or hardware store.
Demo7IIRider 1 year ago
@Demo7IIRider yes i know but it says a company name on the box what is it?
airgunner12 1 year ago
@airgunner12 oh sorry, yea there DUO-FAST .22
Demo7IIRider 1 year ago
@Demo7IIRider ok thnx
airgunner12 1 year ago
i used an old pumpmaster air soft gun by daisy ima try that
coolioman529 1 year ago
Hey, I was thinking of making something similar, I figured I'd take the barrel from an old airsoft-silencer I had lying around (thing aluminum, about 2.5 - 3mm I think).
Anyways, hadn't thought of the possibility of the barrel exploding really, not from a .22 anyhow.
Pretty much just asking for your opinion(s).
porrsmurfen 1 year ago
@porrsmurfen it will work just be careful ok?
goodgod09 1 year ago
@porrsmurfen yea it will work, i would start on a smaller charge first. the 4 is pretty powerful and you wouldnt want to have the barrel split open. i would try and find a steel pipe.
Demo7IIRider 1 year ago
ouhm
keringkein 1 year ago
um........um......um....um.....um......um.....
dirkwang1 2 years ago
thats so ghetto and awesome.
cadeMFjohnson 2 years ago
Humm
yams4ev3r 2 years ago
stop saying umm..every 5 seconds
goodgod09 2 years ago 13
i agree that plastic never a good idea when dealing with firearms especialy homemade ones but the way you have it built it is all contained with in the stell bike parts
zachfletcher1 2 years ago
it's a 22 short, the peaple whu bild zipgun in 22 alwais use stupid big iron pipes, but it's stupid, because cal 22 is too small, you dont need to make a 1kg gun!!!
caprone83 2 years ago
@caprone83 yea a 22 can blow your fingers of and maby your hand depending on the pipe and thay do all the time so yea but you should be safe with 22 ramset blanks in strong steel
deano509 9 months ago
@caprone83 were you sober typing your comment? but yea i just used something safe. rather not lose a finger
Demo7IIRider 8 months ago
got any more info on the barrel? possibly size or brand?
tmoney818 2 years ago
the firing pin is glued on ? have fun lol
suzuki834 2 years ago 11
@suzuki834 yea i used some industrial epoxy.
Demo7IIRider 1 year ago
@suzuki834 lol oh yea. its epoxy. sketchy i know..
Demo7IIRider 1 year ago
ahahah my names matt to lol and i found a bolt off a bike from a goose kneck bolt really thick and solid and fits 22. i tried tha axle and it probly needed drilling a lil bit so yeee i used goose kneck bolt and i dont reccomend that plastic
purpkush309 2 years ago
A few problems that I can c so far (a) not correct diamiter barrel thus horrible accuracy (B) what u made was a center fireing pin not rim fire so may take a few try to get to go off (C) you used plastic never a good idea when dealing with firearms especialy homemade ones but if it does work and u don't hurt itself have fun try to make a suppressor for it that's what I did to mine
Forbidenangel0 2 years ago
yea i know the plasitc is such a bad idea. but it did work. peirces 1/16 thick steelplate. but yea the accuracy is fair. i mean i didnt buid a barret M95 so.. but i was just bored.
Demo7IIRider 2 years ago
that will blow up
rooei66 2 years ago
hey its andrew nice video. first to comment!
garciaguitargod 2 years ago