try hyundai as a logo, or if not, then create your own, you have an amazing imagination, do not let it go to waste, what you need to do is use your talent for the good of the future, good luck, i have the most faith in you.
Take the logo, and angle it outwards with a slight curl, so it looks like a fist that it is pointing its appendage up and out!, so exaggerating its giving Mercedes 'the finger'.
in the begining this was a flying car-concept , dude:)))))
now it has wheels.watch one of the other videos of bolkaNOdesign (if I remember well it was one of the 3D movies)there you will see the wheels.good luck.
I agree with the mazda furai but also the mazda logo will fit the look of the car w/o destroying the elegance of the front end. i cannot say the same for the rear however, as i have not seen it.
the only thing that I can tell u for now is that the name of the brand shall be ,,BOLKANODESIGN,, for now and shall be seen on the Quebec streets at the end of 2010.hope u ll enjoy.3D model with weels u can see in one of my other movies on u-tube.just wright ,,bolkanodesign and aii the movies will appear.the model name shall be ,,Dory,,
thanck u for the suggestion,but I must desagree with your idea for toyota-that s what i m fighting.they are the representatives of the,,anonyme design,,-y see one of their cars on the street and after that the only thing that u remember for this cat is that u don t remember anything on it.but I like your idea for the mitsubishi motors-at least their design is quite interesting/the new lancer/...I ll think about it...see you
nice concept man. artistic and futuristic. From wht u made it? is it like fibre or something?
25kkmak 5 months ago
try hyundai as a logo, or if not, then create your own, you have an amazing imagination, do not let it go to waste, what you need to do is use your talent for the good of the future, good luck, i have the most faith in you.
jaylb24 8 months ago
in some of the drawrins, it looks vaguely like a rams head...
felderup 8 months ago
Take the logo, and angle it outwards with a slight curl, so it looks like a fist that it is pointing its appendage up and out!, so exaggerating its giving Mercedes 'the finger'.
doceigen 9 months ago
looks like a version of Muller's flying car without the fans.
Itsmeeman1 11 months ago
Da modle is geat but day weast time GV it up kids.
mutsalove 11 months ago
This model is gorgeous. Love those curves. Beauty does not need to fly. Give it a Y for logo.
GoldenBeachParty 1 year ago 2
dude, that's all nice, but...WHERE THE FUCK ARE WHEELS ON THAT THING?
bojleri0na0drvetu 1 year ago
@bojleri0na0drvetu
in the begining this was a flying car-concept , dude:)))))
now it has wheels.watch one of the other videos of bolkaNOdesign (if I remember well it was one of the 3D movies)there you will see the wheels.good luck.
Serge/design interior/
bolkaNOdesign team
bolkanodesign 1 year ago
dude, that is seriously the ugliest thing ever. What the heck were you thinking? Also that color scheme is hideous .
emronhenry 1 year ago
dude ,I m sorry for your vision blindness,good luck;)
bolkanodesign 1 year ago
dude ,you are the blindest guy ever,
bolkanodesign 1 year ago
damn, you´re talented!
DaBoogie049 1 year ago
@DaBoogie049
txs dude
bolkanodesign 1 year ago
Ravel on piano!!!
Good project, congrats!!
RenanDiCarlo 1 year ago
@RenanDiCarlo thanks ,in2011 on the canadian streets
bolkanodesign 1 year ago
how about the aerodynamics ??
tested that ? Or did you just make something you would like to see irl.
1ssi7h 1 year ago
@1ssi7h the design is as u see it because fo the aerodinamycs:).u shall see it on the canadian streets in 2011 under the brand bolkaNOdesign.
bolkanodesign 1 year ago
Chevrolet
adamdomonski 1 year ago
@adamdomonski my own brand:bolkaNOdesign in 2011 on the canadian streets
bolkanodesign 1 year ago
Awesome!
I would love designing cars, but I dont have the artistic talent. Very well done!
chrisinator111 2 years ago
@chrisinator111 to make a good car I think that one just needs enough anger against the existing stupid cars:)
bolkanodesign 1 year ago
Make your own logo then?
Mickorec 2 years ago
exactly...already done:)))
bolkanodesign 2 years ago
I agree with the mazda furai but also the mazda logo will fit the look of the car w/o destroying the elegance of the front end. i cannot say the same for the rear however, as i have not seen it.
CarnageS7 2 years ago
the only thing that I can tell u for now is that the name of the brand shall be ,,BOLKANODESIGN,, for now and shall be seen on the Quebec streets at the end of 2010.hope u ll enjoy.3D model with weels u can see in one of my other movies on u-tube.just wright ,,bolkanodesign and aii the movies will appear.the model name shall be ,,Dory,,
bolkanodesign 2 years ago
thanks i'll check it out
CarnageS7 2 years ago
we dont need no wheels for cars in the future. this idea will be brought into the scene by 2030
i used to think of entering design school as a teen haha nobody cares lol anyway you are awesome
shit311 2 years ago
I care,and I care a lot.and I know a way to make this happen.end of 2010 -some interesting news from me and this car.thanks a lot body,take care
bolkanodesign 2 years ago
How do you make models symmetrical?
clevercaveman 2 years ago
sculptor eye, body....:)))))))
bolkanodesign 2 years ago
when i first saw it it looked like an AUDI.
frickypower 2 years ago
you could put BMW or audi, more audi!
arand4 2 years ago
Mazda would work. It reminds me of their Furai and Taiki.
ozznberg 2 years ago
yeah ,their design is one of the good ones:)
bolkanodesign 2 years ago
Yeh agreed. Like your design btw :)
ozznberg 2 years ago
thanks,body.
In 2010 it is on the roads of Quebec and /or other countrys.:))
bolkanodesign 2 years ago
I would say something from Japan like toyota, mitsubishi,or nisan would work
08ssnake 2 years ago
thanck u for the suggestion,but I must desagree with your idea for toyota-that s what i m fighting.they are the representatives of the,,anonyme design,,-y see one of their cars on the street and after that the only thing that u remember for this cat is that u don t remember anything on it.but I like your idea for the mitsubishi motors-at least their design is quite interesting/the new lancer/...I ll think about it...see you
bolkanodesign 2 years ago
mazda, audi, bugatti, ssc would fit.
Ahya728 2 years ago
AWSOME! Nice work! Keep it up! Try AUDI or FERRARI! GOOD LUCK!
ot neli ;)
MonaVieBlueDiamond 2 years ago
I'd like to see that monster on the road one day!
ivelindemirov 2 years ago
I think that mazda makes cars in this style,I propose mazda!
kurkofirkov 2 years ago
Cool Concept Car. Nice work dude!
ivelindemirov 2 years ago
I wonder how it will look like if it was a normal car with wheels?About the make issue, you can always try with Citroen or Peugeot .
voltaja 2 years ago
Niiiice!
mamkamuiprasse 2 years ago