I'M A COMPLETE NOVICE, BUT.. what about some kind of cog system where the hanging magnet's distance from the wheel is adjusted as the wheel spins... and this distance coincides with a certain arrangement of the magnets in a way that the wheel won't get pushed in the opposite direction? So at the point in the cycle where it would normally get pushed back the other way, the hanging magnet is further away.. or at a different angle or something?
as i've been advising you, i still suggest using a circular configuration of magnets of ascending strength with a space between the first (weakest) and last (strongest) magnets.
using magnets of the same strength, no matter the configuration, will cancel each other out.
"Insanity is doing the same thing over and over and expecting different results" - Albert Einstein
hm... maybe you can try it with a second arm with the other half of the ring and locate it about 30 ° cw or ccw (depends ;) ). The idea is to let the second half continue the turning and help the first half-ring passing the gap and force it into the field of your second magnet-row on the disk?
This is for people searching for the NEW AGE religion and its wrong. FREE energy and aliens wont save you they will destroy you. This will be the greatest deception of all soon. So, a deception will be given cause men love the lies more than truth.
Why not make the gap closer ? This way you reduce the dead space. You find the row that moves fastest and duplicate it all around :) you should then get a self starter or if you want have very small gaps do you can change the magnets without it moving all the time. I might just have one space. Thank you for the great work.
The recent Mylow video showing him not being able to get it going was quite interesting, Apparently, what he has is a very fine balance, and I would definitely not assume that swapping an aluminum rotor for plastic or rectangular magnets for round is not a factor. And as mentioned, asymmetrical spacing most likely plays a huge role in getting it to run. Mylow 'feels out' the spacing. Nice looking rig, good luck.
Not quite sure what I am seeing here. Have achieved total revolution, Could you please show a video showing the entire disk rotating hopefully past 360 degrees.
I will do , also have some arc magnets that i will try and demagnetise, but re-orientation of the poles might be difficult, the prefered direction is pressed into the ferrite when made
I'M A COMPLETE NOVICE, BUT.. what about some kind of cog system where the hanging magnet's distance from the wheel is adjusted as the wheel spins... and this distance coincides with a certain arrangement of the magnets in a way that the wheel won't get pushed in the opposite direction? So at the point in the cycle where it would normally get pushed back the other way, the hanging magnet is further away.. or at a different angle or something?
FleeceBristol 1 month ago in playlist Uploaded videos
as i've been advising you, i still suggest using a circular configuration of magnets of ascending strength with a space between the first (weakest) and last (strongest) magnets.
using magnets of the same strength, no matter the configuration, will cancel each other out.
"Insanity is doing the same thing over and over and expecting different results" - Albert Einstein
strongmeasures 2 years ago
eu nao gasta meu tempo para motor fraca.....
ZZ2SVA 2 years ago
can you make it with a cam that would lift the cross stator magnet just before the gate then release it again..?
MattBlytheTheOne 2 years ago
oh oops...
i watched it a second time and noticed there is so to say the second stand i mentioned...
only, it is not in use during the clip.
so i think you gave it a try , already?
if you did, plz, plz, plz let me know, was it better or worse, than the one-stand-solution?
rgds 0.N.
0tt0N0rmal 2 years ago
hm... maybe you can try it with a second arm with the other half of the ring and locate it about 30 ° cw or ccw (depends ;) ). The idea is to let the second half continue the turning and help the first half-ring passing the gap and force it into the field of your second magnet-row on the disk?
Just a thought that came up watching the video.
0tt0N0rmal 2 years ago
Looks like you have tried to copy every hoax & scam on youtube.
What a waste of time & money.
noimw 2 years ago
try to put 2 more magnets in the line that should make the break smaller n give it a lil more force to rotate
parkerhank97 2 years ago
Comment removed
illumineprojects 2 years ago
That looks like fun :D
Those magnets look like the ones in the you tube ad box I am looking at right now-Magcraft.
social3ngin33rin 2 years ago
This is for people searching for the NEW AGE religion and its wrong. FREE energy and aliens wont save you they will destroy you. This will be the greatest deception of all soon. So, a deception will be given cause men love the lies more than truth.
therealtruthtold 2 years ago
lol ... ofcourse doesn't work ... you need n/s linear magnets .. as LONG as you can get ...
alexdese 2 years ago
you try to get free energy ? does it can work?
yanlapanic 2 years ago
Look up zero point energy.
social3ngin33rin 2 years ago
you have a good model there that makes it easy to try stacking the magnets on top of each other in an ascending line of strength...
strongmeasures 2 years ago
Why not make the gap closer ? This way you reduce the dead space. You find the row that moves fastest and duplicate it all around :) you should then get a self starter or if you want have very small gaps do you can change the magnets without it moving all the time. I might just have one space. Thank you for the great work.
rainmanp7 2 years ago
keep up the good work .. maybe some day we will be driving cars powered by magnetic force instead of fossil fuels and or water /electric ..
guppyelf 2 years ago
The recent Mylow video showing him not being able to get it going was quite interesting, Apparently, what he has is a very fine balance, and I would definitely not assume that swapping an aluminum rotor for plastic or rectangular magnets for round is not a factor. And as mentioned, asymmetrical spacing most likely plays a huge role in getting it to run. Mylow 'feels out' the spacing. Nice looking rig, good luck.
ghostofhowardjohnson 2 years ago
WOW John, we meet again!
MAGNETGRUNT 2 years ago
Very cool. I like the workmanship of your models. Keep the videos coming.
charlie1der 2 years ago
Not quite sure what I am seeing here. Have achieved total revolution, Could you please show a video showing the entire disk rotating hopefully past 360 degrees.
Nice honest work!
excel60 2 years ago
Hey Eltimple:
Are you claiming this device is an actual overunity device. It seems like it was given a push at 0:58, which is when it started rotating fast.
petrov2500 2 years ago
Listen to what he says... At a certain speed it may become perpetual. He was just showing that at that speed it isn't
Ode1030 2 years ago
perfect symmetry, exact spacing = evil?
2:40
watch?v=KmFI4MOA7f8
KindaGamey 2 years ago
Your disk ain't aluminium.
JavaLessons 2 years ago
true , but there are chaps out there that have ali and it still doesn´t work. No harm n trying with what i have to hand first
Eltimple 2 years ago
I will do , also have some arc magnets that i will try and demagnetise, but re-orientation of the poles might be difficult, the prefered direction is pressed into the ferrite when made
Eltimple 2 years ago
try raising the stator magnet higher so it doesn't cog so much.
onthecuttingedge2005 2 years ago