same gearing on my revo does about 85 with castle mamba cant seem to get in any faster any tips ????? where did that beautiful front spoiler come from??
Just got this car, best way to stop it from wheelie even at high speeds it wheelie and flips on its back. I just bought weights for the front. Did you adjust the slipper clutch?
It could prob go faster if u replaced the a arms with rpm ones instead of metal. besides if it breaks anything u want it to break at the arm rather than the bulkhead cause its alot easier to replace the a arm.
Love the Rustler I have one my self and it does about 70. Also some of you people ask some stupid questions and some think you know everything. For all you hatters who think they are right about the vxl not going above 75 well your an idiot period..
I know this is 5 months old but I just want to say. that is a 1.9 gear ratio. so keeping that in mind. that means the spur spins half speed of the motor. so if the spur is the rpm of the wheels then the wheels spin half speed of motor. so if motor can handle that much stress it is very possible to go SUPER FAST!!!
I am no expert. i only got my brushless set last week on my rusty
@arvint no unfortunately i moved to a city where the only good place to drive is a college, high school, or mall parking lot. good old san jose california. for offroading i drive along these wonderful beach, but there really is no good place to do high speed runs for now. :) but im still enjoying the hobby, among other things
if you had some talons on it would go alot faster, lol trust me, i put the tiniest tires i had on my rustler and it went only half the original speed lol
is the new 9000kv mamba max motor compatible with the VXL3s? Thatd be great if it is as it would save me about 150 bucks on a new speed controller. If not, does anyone know of some higher kv motors that are? I like my RC cars too fast to handle.
those large tire can mess with the accuracy of radar guns. I saw a revo indicate 61 mph stock in around 20 feet of track. I used the same radar gun as in this vid. The top of the tire is being measured instead of the body. try a small GPS instead.
Saw it, although it is a bit questioning, he does a speed run, and then it randomely cuts the scene, and goes to the speed gun. Dont want to start anything, but usually, you do a speed run, and the camera man walks over to the speeg gun, so you get the speed that everone sees. All though by no doubt that looks fast. Cant be a vxl rustler. As a vxl rustler has a velineon system, and the max you can take that is 75mph. He has some oth Brushless system in there. That thing was fast though!
using a 2650kv 1/8th scale neu/castle motor. Right now im at 25/36 mod 1. I thought i was a high but after about 10 mins of speed running back to back, my temps where around 120F.
sorry corley but its quite impossible for a vxl rustler to hit 95mph. Maybe if it had another brushless system it would. Although, the current record i believe is 90mph (by sunny).
Hey bashhappy, im also in san jose..and i have a project rustler, with a mmm 2650 kv and 6s combo. Im aiming for 90mph atm aswell. If you find some good land, please tell me..i cant find ANYWHERE. (Im only 16, so cant drive yet..so i dont have to much oppurtunitities to explore).
those are my intentions, but in cali, land is expensive. there isnt a lot of empty spots around here. i need to find a drag strip. :) preferably close.
Its a stock body. From the factory, they have it cut/almost painted, except where all that green is on his car. You paint that part whatever color you want.
Traxxas claim 70 mph+ for top speed of a Rustler VXL. I have one (5,000 ma-Hr Li-Po) and I haven't even TRIED the high speed gear. It's so insane with the "low speed" gear on it. But I'm an old fart LOL.
I love the front wing, I have a stainless bumper for mine but it's very heavy. I might drill some holes in it to lighten it, cover it with a membrane to cover the holes (so it can work like a wing) and slant it to give me some down force on the front.
what u need to do is buy front shrocks front and rear and put rear springs on both the front and rear check out my vid and u can see how muhc lower it makes it .
can someone tell me how to keep my front from lifting up.i'd like to see my car get up to 70 like the box says but i flip when i get going. i have a venom 11.1 volt 3 s 5400ma. my rustler is all stock vxl.
Guys..before you say stuff..try searching around, add weight does NOT reduce weight. It DOES add the time which it accelerates to the desired speed. Have a 3lb rustler or a 5 pound rustler, both will EVENTUALLY reach the same speed, givin enough of a run away.
You're right. Weight only affects acceleration not top speed (except additional flexing of the tyres will add a bit of friction, insignificant I suspect).
Ive been in the hobby for just over 15 years and have raced for a good 10 of those years. Im not saying it isnt going quick. But with all that aluminum, I can guarantee its not going 89mph. Like I said I think you need a new radar gun. Its a Nice Rc none the less.
no way your getting 89 mph with all that aluminum.. I think you need a new speed gun. Its goin quick, I aint doubting that but 89?? I dont think so. Not with that aluminum..
Knoc213, you obviously dont know what your talking about, and im not trying to be rude... im just stating a fact. there are lots of VXLers with aluminum bodies going that fast. go educate yourself before making poor comments like that
get rid of the aluminum, plastic is much lighter, which will in the end give you higher speed, the thing is to try and get as light as possible and as low as possible.
I found the tires and wheels that you are running and ordered me a set of them however how did you get them to work on our hubs like what adapters or whatever did you use
What kind of wheels and tires are you running here in this video? I am trying to find some "touring" tires and wheels for my rustler but have no clue what to go with and I dont want to get anything to short
hey brah Im movin to houston in a few months is thur tracks to race I just got my rustler today that air dam in the front definatly keeps dem tires planted on the blacktop fer shur
those plastic shafts have been runing strong since i pulled them out of the box... one of the few stock parts still on the car since i bought it. they have been mazing.... im surprised they havnt broke yet. as back up i have the jato shaft conversion and the hpi dogbone conversion in the tool box just waiting incase they are needed
This has been flagged as spam show
i have a mamba monster motor 2200kv and esc, what gearing do u think i should use?get at me philly is dieing to know bro?
mumforddale1 2 months ago
Comment removed
mumforddale1 2 months ago
shine is worried about his jordans
gnarlyanimal 3 months ago
fukin shine is worried about his jordans
gnarlyanimal 3 months ago
traxxas are poorly built...associated is the best...ps learn to drive ..he he he
blackunderscore 6 months ago
This has been flagged as spam show
@blackunderscore SUCK A DICK YOU BITCH you do not know anything learn to know what is good or not cause right now u failin
14kkasper 3 months ago
traxxas are poorly built...associated is the best
blackunderscore 6 months ago
The VXL series can HAWL! dont underestimate the power of Traxxas
99Rammstein99 6 months ago
thats what happens when you crash a car that fast
skyscootering 7 months ago
love the snow plow on the rustler ;)
MultiMan12345678910 7 months ago
Damn that's a lot of aluminum.
Kooly1 9 months ago
same gearing on my revo does about 85 with castle mamba cant seem to get in any faster any tips ????? where did that beautiful front spoiler come from??
jetpilot28 10 months ago
same gearing on my revo does about 85 with castle mamba cant seem to get in any faster any tips ?????
jetpilot28 10 months ago
I just hit 62mph on 2s today. mmp 5900kv
FU420B 10 months ago
@FU420B what gearing?
DarthWater7 10 months ago
@DarthWater7 26/76
FU420B 10 months ago
cool vid
TheVideoMan1010 10 months ago
Where did you get the front spoiler?
ponie1992 10 months ago
Very nice!
Tintamar5678 10 months ago
That crash was CLASSIC!! lol Awesome!
The2012mustang 10 months ago
Nice Rustler Bash.
Shepx1983 11 months ago
Like the video - Sorry about the suspension damage. What drag strip is that - It looks like it was never used?
sbs9026 1 year ago
what mods do you have on your rustler?
Dmich1x 1 year ago
lmaoo hahaha aluminum is BEAST. plastic broke huh?
demonsparkx 1 year ago
Wow Sick Car:D
Nice BODY omg!
good job
MRLucifersdoosje 1 year ago
Just got this car, best way to stop it from wheelie even at high speeds it wheelie and flips on its back. I just bought weights for the front. Did you adjust the slipper clutch?
Kooly1 1 year ago
dam, the faster the cars get, the more intense crashes get, but i guess thats why they invented spare parts :)
jugglesandmrmathess 1 year ago
It could prob go faster if u replaced the a arms with rpm ones instead of metal. besides if it breaks anything u want it to break at the arm rather than the bulkhead cause its alot easier to replace the a arm.
walspeed 1 year ago
how did you attach the spoiler to the front?
freakstyle2030 1 year ago
ive got a question,even though it is kinda random, what is the point of getting nice shoes then covering them up? lol
brandon9491 1 year ago
SWEET BODY is it custom?
soccerbud97 1 year ago
nice car man, check my rustler out 100mph <----
AutoCannon99 1 year ago
got my rustler to go 60 today
daplaneflyer 1 year ago
you should have been on the other side of the wall... like the people in all the other top speed videos i've watched... just saying...
elp2500HD21 1 year ago
second atempt == fail
how much are they things
christophermc2 1 year ago
What kinda gearing do I need if I want 60mph tops ?
Vince62965 1 year ago
Love the Rustler I have one my self and it does about 70. Also some of you people ask some stupid questions and some think you know everything. For all you hatters who think they are right about the vxl not going above 75 well your an idiot period..
dashire09 1 year ago 20
@dashire09 thumbs up
BashHappy 1 year ago
@dashire09 i agree with you i have one my self and i am currently getting 50+,best car going imo!!!
Yngwiejmalmsteen08 1 year ago
@dashire09 Do u think the vxl is worth it compared to the xl-5?
TheBigBoobsCompany 1 year ago
@dashire09 dido what he said...
916Stunts 1 year ago
@dashire09 put it on a tester I have one with the biggest battery posible not even close. It goes 45 46 mile a hour. It looks faster but not
kimyo1973 3 months ago
i'm doing 100's 103mph and 106 look at my vid
draven3907 1 year ago
What size Lipo you running in that Rustler?
DaBugMan35 1 year ago
@DaBugMan35 like a 16.8v LOL
xXShadowRejectsXx 1 year ago
wht color is the body?
TRAXXASJUNKY 1 year ago
Comment removed
TRAXXASJUNKY 1 year ago
what would u call the front wing of the rustler?
xM80dropedurepock 1 year ago
deserves more veiws!!
xXShadowRejectsXx 1 year ago
medusa dosent make motors anymore so dont screw that one up ..hahha
07STINKYBOY 1 year ago
Nice body custom
SuperTechnoKiller 1 year ago
Why not go completly overboard and put 4 4s lipo batterys the engine might explode but it would deffinetly be worth it lol
smartguy13v 1 year ago
what size spur and pinion gears did u use
rigthguard420 1 year ago
@rigthguard420 Mod 1 gearing... for the revo. i chaged it up from 38 Spur with 20T pinion gearing up or down accordingly
BashHappy 1 year ago
@BashHappy
I know this is 5 months old but I just want to say. that is a 1.9 gear ratio. so keeping that in mind. that means the spur spins half speed of the motor. so if the spur is the rpm of the wheels then the wheels spin half speed of motor. so if motor can handle that much stress it is very possible to go SUPER FAST!!!
I am no expert. i only got my brushless set last week on my rusty
TJonMaxx1 1 year ago
you know with bigger tires the rustler vxl can go faster ;D but this is too fast LOL
xXShadowRejectsXx 1 year ago
What kinda charger do you use for the Lipo?
Ktrain0218 1 year ago
jump that BIT@#
beastly239 1 year ago
i have a rustler vxl and i have anaconda's and i want to get pro line 2.2 so that i can gear higher. do you think it will look weird?
aznkytran 1 year ago
@aznkytran looks are relative to the eyes of the beholder.... just do what feels good and enjoy the hobby.
BashHappy 1 year ago 7
@BashHappy i agree and i thought my brushless slash was fast :( guess slashes r lame
richarded22 1 year ago
shadow, talons would explode at the speeds he is getting..and to compensate for tiny tires, you gear higher, so you would reach the same speeds.
Any new news bashhappy? :D
arvint 1 year ago
@arvint no unfortunately i moved to a city where the only good place to drive is a college, high school, or mall parking lot. good old san jose california. for offroading i drive along these wonderful beach, but there really is no good place to do high speed runs for now. :) but im still enjoying the hobby, among other things
BashHappy 1 year ago
@arvint *beaches
BashHappy 1 year ago
@arvint when i visit houston again for holidays and such, ill bring my material and let er rip
BashHappy 1 year ago
ouch hard hit, hey if you had rpm that arm and links might of been obliterated
xXShadowRejectsXx 1 year ago
if you had some talons on it would go alot faster, lol trust me, i put the tiniest tires i had on my rustler and it went only half the original speed lol
xXShadowRejectsXx 1 year ago
get a gps the ra gun does it work it does go 89 my bandit goes 80 with mamab max
prettyinpink7088 1 year ago
pretty fast????? fuck tht its faster then ur car
XxSonicBLASTxX 1 year ago
sandmanmamba is faster!!!!!!!!!!!!!
mabeanz08 1 year ago
that body is so sick!
jaxzf 2 years ago
what kind of body is that or is it just a customized?
pedroschanel 2 years ago
This has been flagged as spam show
is the new 9000kv mamba max motor compatible with the VXL3s? Thatd be great if it is as it would save me about 150 bucks on a new speed controller. If not, does anyone know of some higher kv motors that are? I like my RC cars too fast to handle.
VideoGamePlayer12 2 years ago
that car looks kick ass
chasedillon577 2 years ago
that shit just broke your whole car
rydoggog 2 years ago
lol everyone have that radar ahahhaha
bernardoptnco 2 years ago
those large tire can mess with the accuracy of radar guns. I saw a revo indicate 61 mph stock in around 20 feet of track. I used the same radar gun as in this vid. The top of the tire is being measured instead of the body. try a small GPS instead.
machryder 2 years ago
what type of tires do u have on ur rustler??
pnutboipmg09 2 years ago
The boot up sounds like my TRex helicopter so I'm guessing the controller isn't the stock version.
This thing is already into triple digits... in METRIC 142 Km/Hr 8^)
warren52nz 2 years ago
Scratch that, he does go to the camera. That thing is pretty fast. Thinking he has a mmm in their? Or some Lehner motor?
Sorry bout the hack bash happy. When are we going to see sheeba back in the game?
arvint 2 years ago
life is busy, pretty soon im hoping. i have to find a new spot. i moved to a different city. i have the MMM with a 60mm motor from Medusa Research
BashHappy 2 years ago
I talk to nick and he working on the vxl today . I think he is tring to run over a 100 mhp with it .
fastcorley 2 years ago
Saw it, although it is a bit questioning, he does a speed run, and then it randomely cuts the scene, and goes to the speed gun. Dont want to start anything, but usually, you do a speed run, and the camera man walks over to the speeg gun, so you get the speed that everone sees. All though by no doubt that looks fast. Cant be a vxl rustler. As a vxl rustler has a velineon system, and the max you can take that is 75mph. He has some oth Brushless system in there. That thing was fast though!
arvint 2 years ago
Did you see the video ( nick's 97 rustler vxl passed ) and it going to go faster . I think around ( 110 mhp ) and some .
fastcorley 2 years ago
using a 2650kv 1/8th scale neu/castle motor. Right now im at 25/36 mod 1. I thought i was a high but after about 10 mins of speed running back to back, my temps where around 120F.
arvint 2 years ago
Got a question for you bashhappy aswell, whats your gearing at?
arvint 2 years ago
use "mod1", e-revo gears. you need a powerful motor... and try 36/19 ratio for something around 3000kV
BashHappy 2 years ago
sorry corley but its quite impossible for a vxl rustler to hit 95mph. Maybe if it had another brushless system it would. Although, the current record i believe is 90mph (by sunny).
arvint 2 years ago
It's all in the set up . Look at the video ( nick's 97 mhp rustler vxl pass
fastcorley 2 years ago
Comment removed
fastcorley 2 years ago
I see that someone when ( 97 mhp with a vxl rustler
fastcorley 2 years ago
wat kind of front tires r tho's
Traxxasizfunruslter 2 years ago
Hey bashhappy, im also in san jose..and i have a project rustler, with a mmm 2650 kv and 6s combo. Im aiming for 90mph atm aswell. If you find some good land, please tell me..i cant find ANYWHERE. (Im only 16, so cant drive yet..so i dont have to much oppurtunitities to explore).
arvint 2 years ago
im going to try a couple of raceways toward the south. ill let you soon as i get back from checking them out. i hope they pan out
BashHappy 2 years ago
ohhh that crash sucked!!!
xXShadowRejectsXx 2 years ago
did you give up? Havent made a video in almost a year? PLEASE RESPOND
geedunk13 2 years ago
nope i havnt givin up, just been real busy... plus i just moved to San Jose CA, i have to find a good spot out here to drive.
BashHappy 2 years ago
thnx. for the reply. Cool, good luck, and make a vid when you get to one of your goals. 89 mph, woah, that is really fast tho.
geedunk13 2 years ago
those are my intentions, but in cali, land is expensive. there isnt a lot of empty spots around here. i need to find a drag strip. :) preferably close.
BashHappy 2 years ago
GAY SONG
nickerman55 2 years ago
where did u get that front bumper
cdawgydawg73 2 years ago
Comment removed
yellowcorba1 2 years ago
0:53 daaaaannnngggggg
hockeyandrccars 2 years ago
Its a stock body. From the factory, they have it cut/almost painted, except where all that green is on his car. You paint that part whatever color you want.
arvint 2 years ago
where can i get tht body/what is it called
rideyz3 2 years ago
Those are losi belted tires. Out of production now. (On ofna rims if im not mistaken). GPR makes some similar blue groove ones.
arvint 2 years ago
OFNA Belted 30 bucks a pair, im switching to foams... the belt breaks when you hit 95mph
BashHappy 2 years ago
what tires are u using??
MrSuperNathan 2 years ago
thats a fricked up song! nice car though!!
mikevaneck1 2 years ago
were did u get the bumper wats it called
bulletnjm 2 years ago
how did you do the front wing?
34kevin34 2 years ago
Oops..meant to say speed :D
arvint 2 years ago
Traxxas claim 70 mph+ for top speed of a Rustler VXL. I have one (5,000 ma-Hr Li-Po) and I haven't even TRIED the high speed gear. It's so insane with the "low speed" gear on it. But I'm an old fart LOL.
I love the front wing, I have a stainless bumper for mine but it's very heavy. I might drill some holes in it to lighten it, cover it with a membrane to cover the holes (so it can work like a wing) and slant it to give me some down force on the front.
warren52nz 2 years ago
Is that the top speed record of a rustler?
Kingbiker96 2 years ago
hey how did you get the spoiler on the front?
kenwoodprobes93 2 years ago
i got the same rustler vxl i got it to go 85
manchester10101 2 years ago
what u need to do is buy front shrocks front and rear and put rear springs on both the front and rear check out my vid and u can see how muhc lower it makes it .
Badassrustler 2 years ago
can someone tell me how to keep my front from lifting up.i'd like to see my car get up to 70 like the box says but i flip when i get going. i have a venom 11.1 volt 3 s 5400ma. my rustler is all stock vxl.
kenwoodprobes93 2 years ago
Guys..before you say stuff..try searching around, add weight does NOT reduce weight. It DOES add the time which it accelerates to the desired speed. Have a 3lb rustler or a 5 pound rustler, both will EVENTUALLY reach the same speed, givin enough of a run away.
arvint 2 years ago
"add weight does NOT reduce weight".
I'm sure you meant "does not reduce speed".
You're right. Weight only affects acceleration not top speed (except additional flexing of the tyres will add a bit of friction, insignificant I suspect).
warren52nz 2 years ago
whats the record for the fastest rustler ?? anyone know ?
jakester142 2 years ago
90 mph, by Sunny Waas
MistaChy 2 years ago
re rig it with mamba monster and giant motor..watch er rip then
rubinmeneps 2 years ago
is that a rear spoiler on the front?
sexterminator11 2 years ago
Ive been in the hobby for just over 15 years and have raced for a good 10 of those years. Im not saying it isnt going quick. But with all that aluminum, I can guarantee its not going 89mph. Like I said I think you need a new radar gun. Its a Nice Rc none the less.
Knoc213 2 years ago
no way your getting 89 mph with all that aluminum.. I think you need a new speed gun. Its goin quick, I aint doubting that but 89?? I dont think so. Not with that aluminum..
Knoc213 2 years ago
Comment removed
MistaChy 2 years ago
Knoc213, you obviously dont know what your talking about, and im not trying to be rude... im just stating a fact. there are lots of VXLers with aluminum bodies going that fast. go educate yourself before making poor comments like that
MistaChy 2 years ago
bollocks
sexterminator11 2 years ago
Good speeds man and some nice mods, maybe lose the alloy to get more speed.
RustyRustler 2 years ago
medusa and mamba max are awesome i have them too
0Bradda 2 years ago
what does he use for an esc i see a monma max and a flight esc from cc its weird i dont understand why he has 2 escs can anyone help!
Badassrustler 2 years ago
cc is bec
0Bradda 2 years ago
Nice one.
Getting the front to stay down is key to getting high speeds out of the Rustler. Looks like you cracked it.
happylad 2 years ago
its a wind breaker so the wind doesnt get under the body because if it does at that speed it will fly!
Badassrustler 2 years ago
this vid is cool 5/5 and nice tires what kind are those. i have rustler vxl and i want to get street tire for my rusty
biocybermaxx 2 years ago
0:49 ouch!
rcgalor 2 years ago
Dang! Can you give me a list to see what you put something on the rustler. Was it easy to drive that?
jamesspeed70 2 years ago
Cool Video. Great truck!
kenmtb 2 years ago
the thing at the front is used for aerodynamics, so smoother faster runs, and plus the wind cant get under the car therfore it wont fly!
imy2k07 2 years ago
what is that thing in the front of the rc car
JoshuaAquino13 2 years ago
a HUGE bumper perhaps?
littleseanx 2 years ago
I run my stock rustler with a 3600 venom how long is run time on that battery with your rustler?
lightsaberdudes2 2 years ago
What tire and rims are you running?
williambardin94 2 years ago
where can i get one of those radar gun?
elcanapas11 2 years ago
i wanna know 2
pbjsandwich101 2 years ago
get rid of the aluminum, plastic is much lighter, which will in the end give you higher speed, the thing is to try and get as light as possible and as low as possible.
PTHcrf 2 years ago
Weight has nothing to do with top speed.
RathaSlayer 2 years ago
sure, it does. makes it easier to get there. and less strain on the motor will give more speed.
PTHcrf 2 years ago
dude ya got owned hope ya castle stay's workin for ya since they are crap
biggdaddy2001 2 years ago
I found the tires and wheels that you are running and ordered me a set of them however how did you get them to work on our hubs like what adapters or whatever did you use
jonscar912 2 years ago
What kind of wheels and tires are you running here in this video? I am trying to find some "touring" tires and wheels for my rustler but have no clue what to go with and I dont want to get anything to short
cam8604 2 years ago
fuck me, i have a standard one atm, getting like $300 to Pimp it up
iV4xz 2 years ago
sick!!
is that a 50mm medusa ur running?
keep up the great work!
SSSavage25 2 years ago
nice keep up the good work on it and good luk with it im building mine rustler this week
davidherne352 2 years ago
hey bashhappy good luck with the 100 mph... Everyone at the TRAXXAS Bandit/Rustler forums is counting on ya!!!
Fom BoXie01.
boxanata 2 years ago
nearly there... just waiting on a few parts to arrive :D
BashHappy 2 years ago
hey bash happy what kind of bumper do you have on there
youngmoney565 2 years ago
check your messages
BashHappy 2 years ago
sux is not a fuel
club4ghz 2 years ago
are you running vxl esc and how many teeth is the pinion?
LV1JACKIE 2 years ago
go to.... monster traxxas com. search the forum for "getting closer to 90"... you can view my entire setup there
BashHappy 2 years ago
i did it not there-_-
LV1JACKIE 2 years ago
hey brah Im movin to houston in a few months is thur tracks to race I just got my rustler today that air dam in the front definatly keeps dem tires planted on the blacktop fer shur
jiujitsustudent 2 years ago
You need steel extended drive shafts man
partyatmccartys 3 years ago
those plastic shafts have been runing strong since i pulled them out of the box... one of the few stock parts still on the car since i bought it. they have been mazing.... im surprised they havnt broke yet. as back up i have the jato shaft conversion and the hpi dogbone conversion in the tool box just waiting incase they are needed
BashHappy 2 years ago
What's your gearing brah? That rustler is sick. I have a full alum. VXL stampede, and I want to get the spped on up there into the 60's.
partyatmccartys 3 years ago
im runnin mod 1 gearing, 38/18
BashHappy 2 years ago
Hey Goof, wuts the story with your speeds man? ya hit the 100 yet? havnt seen ya on the forum in ages
jodati 3 years ago
im going out monday
BashHappy 3 years ago
hey what kind of tires do u have ?
john061988 3 years ago
im runnin belted ofnas... you can get em on tower
BashHappy 2 years ago
stll workin on it... iv been to the strip but have had servo issues.... im going tomarrow, wish me luck
BashHappy 2 years ago
where did you get your body
sitton440 3 years ago
Its just a stock lid painted yellow
BashHappy 3 years ago
Hell yeah!...Houston brushless crew!
treridings 3 years ago