Yeah, but I don't want the government telling me that I must use this new device. If I want to smoke, drive without a seat belt, ride a motorcycle without a helmet and keep my guns unlocked so that my boys can play with them, it's MY BUSINESS!!!!!
When Jigsaw catches me and straps me into one of his traps and I wake up and saw blades are rolling towards me, let's hope he used these saws and I can walk away calling him a noob.
would it work if the hot dog was in a bun? or what if i was wearing work gloves?you know what i think i will just be extra carefull and concerntrait when i am working with a saw...........i work in an ice cream shop we got one flavour, its leather brogue flavour
Why didn't you use a real finger I know some construction works that would buy them if you did. There argument is that your not confident enough to try then why would they be
they didn't use a real finger because injury potential still exists, however loosing a finger is pretty much impossible, you'll get a cut at worst, id rather have a cut than loose a finger.
70 dollars is cheap when you consider how much it would have cost if the saw didn't stop. You'd have doctor bill and then Physical therapy not to mention the pain and missing work. Even with insurance by the time you paid all your co-pays you'd probably still pay more than $70.
so, if a hot dog will absorb the electric charge and activate the safety brake (which effectively ruins the saw), why wouldn't a moist piece of lumber do the same?
pressure treated wood is often very moist with chromated copper arsenate preservative
It has an override feature that allows you to cut conductive material, though that means that it wont stop for your finger or hand either, so you have to be super careful. as you should anyways.
Wouldn't it be cheaper to just put something between the blade and your hand? You know, something you could just set at the height of the wood so your hand can't pass through? Or does that pose problems of its own?
nice, so you're out of a saw blade and the aluminum brake needs to be replaced. once it stops then what? "oh the safety mechanism, thank god.... so when can i finish sawing this board?"
So your out of a finger and that can't be replaced. At least you still have a working table saw though. "Thank God it kept on cutting right through my finger, I don't know when I'd be able to finish cutting this board if it didn't."
For 10 years I have worked in an industry that will take fingers and sometimes lives, and I go by what I was told. "The machine does not care about you, how your day is, and if you have a family." Use your head and you'll keep your digits.
ok melon heed, how am i retarded if you get cut, but you might only get cut anyway?
sure you might lose a finger, but what if that wasn't the case? what if you actually noticed your finger creeping toward the blade, and got away with a tiny nick?
stop trying to argue. by what you have said, you have deemed yourself too far down the "moronic" road, and no matter what you say it wont bring you back. so stfu u moron.
only bad thing about that is you cant saw wet lumber and sometimes wood might be a little bit to wet on the inside because every peice of wood has a amount of moisture in the wood
you don't have to, no-one "trusts" a table saw when they cut off their finger/hand: it's not a conscious decision :P it WILL save you weather you trust it or not :)
just recently a student in my class was using this type of saw in shop. and his finger did in fact hit the blade. all he had, was nothing more than a paper cut. there wasn't even any blood.
I own a SawStop 3hp cabinet saw. I've never tripped the mechanism but the saw is really accurate and smooth. Pretty much no vibration, larger than normal cast iron smoothly machined table, and everything's true and straight. It's $4000 out the door w/ all the accessories you'd want but it really is worth it. I never have to worry about the fence being straight, etc, just set it and go. Plus I am even more careful because each time you trip the mechanism it's 60 bucks for a new cartridge.
Well, a nicked finger is worth about $45 to me, so I'd be mad if I tripped a cartridge only to prevent a nicked finger. But a severed finger is worth maybe $439 so I wouldn't mind if I had to replace a cartridge that prevented a severed finger. I have purchased an extra cartrige so at least I could keep working if I tripped one. I don't mind the $60 so much but the inconvenience of re-ordering them would be annoying.
Lol, We had one that was missing an index finger too.
I think if you put all the shop teachers in the World missing body parts together you could probably make an entirely new one. A Frankenstien Shop teacher!!!
Use real fingers or I ain't buyin
Ian2002 2 weeks ago
I want to see the real thing!
sh3lbot 2 weeks ago
Yeah, but I don't want the government telling me that I must use this new device. If I want to smoke, drive without a seat belt, ride a motorcycle without a helmet and keep my guns unlocked so that my boys can play with them, it's MY BUSINESS!!!!!
Fat, angry, white Tea Party Man
fbharris67 3 weeks ago
@fbharris67
this was on the colbert report last night.
hellofaname 2 weeks ago
When Jigsaw catches me and straps me into one of his traps and I wake up and saw blades are rolling towards me, let's hope he used these saws and I can walk away calling him a noob.
speckyprick 1 month ago
What happens if your wood is slightly wet?
xaboo 2 months ago
So if you happen to cut you fingers up often on you table saw... Stock up in blades, and band aids.
erpiv 2 months ago
they make it sound like its gonna fuck my saw up
bobthebuilder6938 2 months ago
our woodshop class has one
AdioX321 3 months ago
STILL CRINGING!
MisguidedTerran 3 months ago
Try it with fingers. Or at least something similar.
I'm assuming not many people cut wood with their dicks. Or at least not since the late 1800's when they found out it wasn't very efficient.
Lazypackmule 4 months ago
Really cool!
Ride84XL 4 months ago
try it with your finger... it just might not like hot dogs =P
ViventLeMoment 4 months ago
The wonders of science...
TheBomber15 5 months ago
That's awesome.
Kal1000000 5 months ago
would it work if the hot dog was in a bun? or what if i was wearing work gloves?you know what i think i will just be extra carefull and concerntrait when i am working with a saw...........i work in an ice cream shop we got one flavour, its leather brogue flavour
pcfaulkner 6 months ago
...id want to test it with my finger
frizzybob 6 months ago
Simply amazing.
tshepp89 7 months ago
So I won't get my wiener sawed off even if I try?? Thats a relief
dogeymon83 9 months ago
awesome.. whey arent these everywhere?
3DSNewsAndReviews 9 months ago
Why didn't you use a real finger I know some construction works that would buy them if you did. There argument is that your not confident enough to try then why would they be
carnyclyde 1 year ago
@carnyclyde
they didn't use a real finger because injury potential still exists, however loosing a finger is pretty much impossible, you'll get a cut at worst, id rather have a cut than loose a finger.
bradmanthethird 11 months ago
Haha there is more than just a doctor bill to consider. When you loose a finger it doesn't grow back! This saw is changing lives. Awesome!
Vincegould 1 year ago
So it's basically just an ELCB...?
DdlyHeadshot 1 year ago
it looked like it popped
monsterjamkid 1 year ago
70 dollars is cheap when you consider how much it would have cost if the saw didn't stop. You'd have doctor bill and then Physical therapy not to mention the pain and missing work. Even with insurance by the time you paid all your co-pays you'd probably still pay more than $70.
Coraleeish 1 year ago
Amazing feature for sure. I always approach my table saw with great respect and exaggerated, slow hand movements.
jotyod 1 year ago
They better not throw away that hotdog!
BorinisMan 1 year ago
thats puritty sweet
DRIZZAT1 1 year ago
wtf nice job!!!
dathundi 1 year ago
He did try it with his own (soaked) finger: watch?v=E3mzhvMgrLE
VCat2006 1 year ago
mommy, im scared
YouGotAnEmail 1 year ago
well this is it cheaper to get a new finger , than a new saw ?
gazzxr 1 year ago
I think you can shut the feature off?
keegan341 1 year ago
Comment removed
LoneHerper 1 year ago
@LoneHerper xDDDDD
dathundi 1 year ago
somebody stop him, he thinks my dick is a hotdog! call a medic!
MrSgrobot 1 year ago
do it with a finger then pussy
rxiZeus 1 year ago
you know, if that thing is so safe, why not test it on...your own hand?!
bean420man 1 year ago
just what I needed, a seatbelt for my saw.
bean420man 1 year ago
What if the wood is slightly damp?
prubcic7 1 year ago
so, if a hot dog will absorb the electric charge and activate the safety brake (which effectively ruins the saw), why wouldn't a moist piece of lumber do the same?
pressure treated wood is often very moist with chromated copper arsenate preservative
aallppiinnee 1 year ago
Amazing.
wisteela 2 years ago
which will never deviate from the parallel.
This portable light weight technology cuts sheet material to 4ft. on center requiring no large
permanently mounted side or out-feed extension tables
World wide there are hundreds of thousands of table saws with the old dangerous technology out there. Sawstop at
this time cannot retro-fit these saws. Buy new not necessarily, retro-fit available yes, but don't be
complacent and keep your wits about ye
seumas2 2 years ago
if that thing is broken you can kill your self never get one of those things
chanlison999 2 years ago
as opposed to...a non-retracting saw?
so, something designed to protect you that didnt work is far more dangerous than something without the safety feature in the first place?
squidmanlol 2 years ago
still cuts your finger,just wont cut it off.
Arkstrikle 2 years ago
Put the cock there and see if it stops :) I would do it. :D Haha
PsykoRetil 2 years ago 3
This fucking sucks, how am I supposed to cut my hot dogs now?
SqueeksoAo 2 years ago 121
LOOOOOL
AxiumGunFighter 2 years ago
@SqueeksoAo BAHAHAHAHAHAHA!!! So true...
omgwtfbbq6666 1 year ago
@SqueeksoAo Cutting hot dogs is just retarded. I know you're joking, but it's not funny. Knifes exist for some reason.
Cyborg290 1 year ago
@Cyborg290 You must be a real joy to be around.
SqueeksoAo 1 year ago
@SqueeksoAo /watch?v=0MRmxfLuNto&annotation_id=annotation_524589&feature=iv
Put it after youtube.com. That explains what I'm saying.
Cyborg290 1 year ago
@Cyborg290 I'll just assume it's a video of some guy watching a parade, then shitting all over it.
SqueeksoAo 1 year ago
@SqueeksoAo omg lol!!!
scene363 1 year ago
This comment has received too many negative votes show
i have one of these, so i tried it on my tounge,
Thets just say i cannot speak anymore.
bowgyboy 2 years ago
really??
xXShadowRejectsXx 2 years ago
omg obviously lying otherwise you couldn't have said that, durrr.
MikoKeZ 2 years ago
Would it cut through bone? Or just stop?
tenshichanyo 2 years ago
would nick the skin thats it
037342 2 years ago
and about wet wood?
lucgondim 2 years ago
it has a bypass. u just turn off the safety thing and then it wont do that.
ElArGeNtInO12 2 years ago
that's great
TheJapan1 2 years ago
Very clever. My mums friend lost 3 fingers to a saw like this but without the safety design. Hopefully it's saved some fingers.
malango255 2 years ago 12
my brother's drunk friend almost chopped his penis off with a table saw like that too. XD
ivantopito 2 years ago
@malango255
safe hu not that hot dog had a bit taken from it
MultiSniper70 2 months ago
poor hot dog :(
S3aW3ed 2 years ago 4
its good but u couldnt cut metal wiv it
cheesewire101 2 years ago
It has an override feature that allows you to cut conductive material, though that means that it wont stop for your finger or hand either, so you have to be super careful. as you should anyways.
Michael0808Milo 2 years ago 2
Wouldn't you use a stronger saw, like a cold saw, for cutting metal?
pepolez 2 years ago
.
Try it with a different weiner.
.
HA HA HA
RomeoTheRottweiler 2 years ago
why dont they try with their finger... -.-
EXPNED 2 years ago 2
Look up timewarp sawstop on youtube, the creator of the saw put his finger to it..
Michael0808Milo 2 years ago
Thanks
EXPNED 2 years ago
Does this only work with hotdogs?
artenman 2 years ago 3
Wouldn't it be cheaper to just put something between the blade and your hand? You know, something you could just set at the height of the wood so your hand can't pass through? Or does that pose problems of its own?
RussellsParadox 2 years ago
Why dont you stfu and put your helmet back on.
artenman 2 years ago
This has been flagged as spam show
What the hell is that supposed to mean, and what the fuck is your problem?
RussellsParadox 2 years ago
It is only $60 for the blade and mechanism that is ruined.
unshotdeuxkills 2 years ago
as opposed to your finger or hotdog being ruined
GavinOFerrell 2 years ago 2
i want human demonstration
johnmcll9 2 years ago
Should've tried it with his finger, since its safe you know =o
Armlace 3 years ago
And you can use it again....wait, no, never mind.
carsismeZ06 3 years ago
nice, so you're out of a saw blade and the aluminum brake needs to be replaced. once it stops then what? "oh the safety mechanism, thank god.... so when can i finish sawing this board?"
contentlocked99 3 years ago
its better than losing a finger.
countbleck35 3 years ago 3
So your out of a finger and that can't be replaced. At least you still have a working table saw though. "Thank God it kept on cutting right through my finger, I don't know when I'd be able to finish cutting this board if it didn't."
Moron.
mfs12345 3 years ago 3
This comment has received too many negative votes show
fuck you too cockshiner. "that can't be replaced" your obviously a virgin to the word PROSTHETIC
contentlocked99 3 years ago
For 10 years I have worked in an industry that will take fingers and sometimes lives, and I go by what I was told. "The machine does not care about you, how your day is, and if you have a family." Use your head and you'll keep your digits.
khh1964 3 years ago
content locked you are indeed a fucking moron. i almost cant believe im wasting my time telling you so.
melonheed3 3 years ago
ok melon heed, how am i retarded if you get cut, but you might only get cut anyway?
sure you might lose a finger, but what if that wasn't the case? what if you actually noticed your finger creeping toward the blade, and got away with a tiny nick?
contentlocked99 3 years ago
stop trying to argue. by what you have said, you have deemed yourself too far down the "moronic" road, and no matter what you say it wont bring you back. so stfu u moron.
radudman 3 years ago
my bad einstein, i didn't realise you knew everything.
hey btw what's the meaning of life? because you're so much smarter than everyone else you should know right?
contentlocked99 3 years ago
Comment removed
radudman 3 years ago
its 42
radudman 3 years ago
i've seen that movie lol
contentlocked99 3 years ago
good. at least youve got SOME sense in you.
radudman 3 years ago
only bad thing about that is you cant saw wet lumber and sometimes wood might be a little bit to wet on the inside because every peice of wood has a amount of moisture in the wood
snipeufast 3 years ago
in my shop class we have a stop saw like this and I've seen it cut wet wood before and the teacher actually messed up once and it saved his finger
oldbag222 3 years ago
heres my question. What if your cutting wood that has a lot of moisture in it. One thats been sitting outside.
pizzaisgood14 3 years ago
Well noone in their right mind would use wet wood for precision cutting as it shrinks (and even warps) when it dries.
But it'd probably figure out there isn't enough electricity running through to know it's not someones limb.
GuruLarry 3 years ago
@GuruLarry Actually, there's an override key for just such an occasion.
VCat2006 1 year ago
awesome it get's a full (holds up hands) 9
eltonzzafg 3 years ago 3
I heard $3500 is the base price, I hope it come's with the Grill.
tgasttko69 3 years ago
thats guys wiener is harder than woodpecker lips
toushhog 3 years ago 4
wow if they really wanna convince me they should use a real hand ahaha
ranma763 3 years ago 22
they used a real hand on the show time warp
biffset4 3 years ago
why not a d***
trifarce101 3 years ago
I volunteer yours
ranma763 3 years ago
I don't have a duck. You have a dirty mind young man.
trifarce101 3 years ago
I was volunteering YOUR duck. YOU have a dirty mind, young man
ranma763 3 years ago
my new duck says we both do.
trifarce101 3 years ago
Agreed
ranma763 3 years ago
I thought he meant using the wood panneling from his DECK.
GuruLarry 3 years ago
I thought he said why not a dick? but i guess i was wrong
CybeProductions 3 years ago
another dirty mind! lol merry Christmas!
trifarce101 3 years ago
Merry Christmas xD!!!
CybeProductions 3 years ago
@ranma763 they did... search "SAWSTOP in time warp" up there ^
legoclockfreak710 1 year ago
I still wouldn't trust it.
ashxc 3 years ago 2
you don't have to, no-one "trusts" a table saw when they cut off their finger/hand: it's not a conscious decision :P it WILL save you weather you trust it or not :)
samthejokerman 3 years ago 2
just recently a student in my class was using this type of saw in shop. and his finger did in fact hit the blade. all he had, was nothing more than a paper cut. there wasn't even any blood.
inventorkid13 3 years ago 5
Can it be used multiple times, or does it all need replacing if it happens.
GuruLarry 3 years ago
@GuruLarry The $60 brake module will have to be replaced, and the blade will at least be a little dull.
VCat2006 1 year ago
@GuruLarry
That is my question 2! Is the stop thing broken after use?
HelihunterX 1 year ago
@HelihunterX I'd imagine that it needs replacing yes.
GuruLarry 1 year ago
@HelihunterX You need to replace that entire part, including all the stuff underneath and it costs $70 to get another.
GuruLarry 1 year ago
@GuruLarry
Uhm very expensiv ....
HelihunterX 1 year ago
@GuruLarry which is a small price for you fingers!
muscle1983 1 year ago
@inventorkid13 only a paper cut?
homeshows123 1 year ago
@homeshows123
Well, i still don't think, you should check it yourself X)
JunkerKun 1 year ago
cool!
FHS0Napoleon 3 years ago
I own a SawStop 3hp cabinet saw. I've never tripped the mechanism but the saw is really accurate and smooth. Pretty much no vibration, larger than normal cast iron smoothly machined table, and everything's true and straight. It's $4000 out the door w/ all the accessories you'd want but it really is worth it. I never have to worry about the fence being straight, etc, just set it and go. Plus I am even more careful because each time you trip the mechanism it's 60 bucks for a new cartridge.
Orkomagic 3 years ago
"I am even more careful because each time you trip the mechanism it's 60 bucks for a new cartridge. "
So, in the form of a mathematical expression, 1 finger < $60?
RussellsParadox 2 years ago
Well, a nicked finger is worth about $45 to me, so I'd be mad if I tripped a cartridge only to prevent a nicked finger. But a severed finger is worth maybe $439 so I wouldn't mind if I had to replace a cartridge that prevented a severed finger. I have purchased an extra cartrige so at least I could keep working if I tripped one. I don't mind the $60 so much but the inconvenience of re-ordering them would be annoying.
Orkomagic 2 years ago
Who would saw with their wiener on the board anyway?
Gotenssj500 4 years ago 4
John Wayne Bobbet possibly?
GuruLarry 4 years ago
LMAO xD
Hotora86 4 years ago
Well, his ex-wife anyway ^_^
GuruLarry 4 years ago
awesome
krikbre 4 years ago
it disapered
Panpizza15 4 years ago
wow that is awesome!
bookittty182 4 years ago
If the demonstrator were really confident in the device he'd have used his finger rather than a sausage ;)
I use a band saw to cut foam of various types; I wonder if the interlock would prevent cutting things other than wood - like polystyrene?
Syd1940 4 years ago
Well the saw does still cut you, theres no avoiding that, so maybe thats why, also it's easier to show the damage when blood isn't gushing out of it.
I think it'll cut anything, It depends if the item in question can conduct/transfer electricity from a human. If it was wet i'd guess it would.
GuruLarry 4 years ago
Yes, when your finger touches it, you will bleed, but it won't be like be cut off and a finger on the ground
matthew4862 4 years ago 3
very nice
slmdj 4 years ago
Excellent Idea
DrSwash 4 years ago
what an acheivement,bloody well done.
narkedoff 4 years ago
no more missing fingers and hands off of stoners don't get fucked up and operate machines
gera16900 4 years ago
clever stuff
spooner2006 4 years ago
But what if you wanted to cut Hot Dogs ?
tonyfamous 4 years ago
ahahahah
Nandez18 4 years ago
That is awesome! My old shop teacher was missing 3 fingers, Safety first guys- safety first!
Lodestone1968 4 years ago
Lol, We had one that was missing an index finger too.
I think if you put all the shop teachers in the World missing body parts together you could probably make an entirely new one. A Frankenstien Shop teacher!!!
GuruLarry 4 years ago
sweet i want one
xxxdarkspawnz 4 years ago
that was amazing
scotbilt 4 years ago