Cybergun Mini UZI BB Gun Full Auto Modification

[Kackamann1]

That's it? o.O

[MegaHacka]

Plastic BB's or metal?

[switchingtomac]

@MegaHacka This one shoots 4.5mm Steel BB's but there is an Airsoft version that shoots 6mm plastic BB's

[mhizzo22]

just did mod was fairly easy thanx quick question wat it that rotating peice on the front of the gun wear the bareel is do. is it cosmetic or functional

[theSSSfilms82]

i hunt lemmings with high power BB gun and 22.rimfire

[HaisusChrist]

Just did my Mod , its INSANE! I HIGHLY suggest oiling up the internals after doing this MOD as there is ALOT of wear and tear after running 2 co2's threw it on full auto, i oiled it up (internals) and it made a HUGE diference

[switchingtomac]

@HaisusChrist Always good to keep things moving freely!

[switchingtomac]

@HaisusChrist It is a Hop-up system, gives the BB more backspin or less ark.

[Aardys]

you say someone is going to make metal side plates for this uzi , , do you know if they are ready for sale yet and who does them ?

[switchingtomac]

@Aardys The only one I know of is here: intrudershop(dot)com

[Pfm1191]

cool gun ... the 344fps is kinda lame and also makes me nervous that means all those bbs are gonna be ricocheting everywhere vs. getting lodged in what it hits

[kamratframjandet]

Also, I have a feeling that the receiver pin may be worn out / broken if you open it up too many times, though I'm sure there are plenty of stuff (simple screws and whatnot) out there that you could use to replace it.

[switchingtomac]

@kamratframjandet I'm sure fit still work ;)

[kamratframjandet]

@switchingtomac Yep, I tried it out in my bedroom (without BBs) underneath a few layers of sheets and stuff (just not to alert my neighbors ;). Though I think the co2 cartridge lasted a little shorter than in single burst mode. By the way, is it a bad idea to fire a co2-gun without BBs in it?

[switchingtomac]

@kamratframjandet You can dry fire, it's OK.

[kamratframjandet]

@switchingtomac Ok, thanks!

[alphabetwiz]

@switchingtomac Is this gun full or mostly metal?

[switchingtomac]

@alphabetwiz It has a lot of metal. Just a bit of the outside shell is plastic but all the rest of the gun is metal. It weighs in at around 5 pounds.

[MrAirsoftking96]

if only ther was an empty switch you will understand my reasoning when you look at 1:46

[etwangboy]

THANKS ALOT!!!! this video and all the other videos on this airgun really helped. i will for sure check out the rest of your videos and think they will be just as good as these. i subed :P

[Frankenfoot95]

Do you have any idea how I would figure out if it's illegal or not to modify the Uzi?

[switchingtomac]

@Frankenfoot95 Need to check with your local area laws? Each State in the US has different laws for airguns.

[JUKEBOXX1990]

@switchingtomac very easy mod and i did it but my safety seems to not work anymore..o well the safety is in my head

[Pfm1191]

@Frankenfoot95 quit being a bitch and just do it ... what do u think the police are gonna tell you ?

[desertterra]

Well made Video, but a "Power-Mod" would be nice

[switchingtomac]

@desertterra Thing might blow up?

[desertterra]

@switchingtomac Perhaps to make the fps a little bit faster, or more powerfull.

[JUNAID187]

what does the r stand for on semi auto

[switchingtomac]

@JUNAID187 It stands for Repetition:

A = Automatic

R = Repetition (Semi)

S = Safe

[natrelacoustix]

Hi Mike, love the vids and ur web site, but I don't understand why u strip the upper reciever and take out the bolt carrige on the Uzi.

Just tap out the pin, remove lower reciever, clip off nubbin (little bit 'o' plastic) quick rub with glass paper, bottom back on, tap in pin with small light hammer, and ur done full auto!

[949needleguy]

Thanks for the mod video! It was extremely useful in making my uzi a full auto gun.

Great step by step instructions!

[switchingtomac]

@949needleguy You're welcome!

[mrbigtian]

here is a little tip on how to remove the lower receiver pin:

you can hammer the pin out with a medium amount of force. (about half the force when u hammer a nail) Once the pin is in, just pull it out from other side.

[switchingtomac]

@mrbigtian Thanks for the tip!

[mrbigtian]

@switchingtomac no problem, cause i tried to squeeze the pin and it just pretty difficulty to do, so i hammer it out!

[rogersimperial]

@mrbigtian In Canada they are selling a version that you can select the full auto abillity but still is only semi-auto. WHAT DO WE DO IN THIS CASE??? Hope to hear more news soon.

[mrbigtian]

@rogersimperial is yours is a Cybergun product??? make sure is the same brand and same model as this one. if not...well...

[mrbigtian]

done!!! 

[hobojack52]

thanks.



[hobojack52]

were do you get that gun?

[switchingtomac]

@hobojack52 I sell it at my website:

ReplicaAirguns(dot)com

[tinderinc]

@hobojack52 I know where if your in the west coast of BC Canada

[Meriouu]

cool thanks! i'm going for tools and make it spit that bb's :D

[mrblazed42069]

so why did they block off the full auto from the factory on this?

[switchingtomac]

@mrblazed42069 Not sure, maybe uses too much CO2, or problems with laws in some countries?

[arevaloanthony]

again thanks for the info.  ^_^ atleast o dont have to worry about testing it tommorrow

[arevaloanthony]

ohhh im not really sure, but there's a sight on the rear end and you can adjust that with a screw driver or you can just flip it right... and there's an adjustment knob on the front... my friend told me that its for the hop-up but i guess i just took his word for it... why dont you try adjusting it and see if its for the front sight or the hop-up, ill try it myself tommorow if there's a slight change on the velocity of the steel bb's i'll let you know. ^_^

[switchingtomac]

@arevaloanthony I think it is for adjusting the front sight elevation. Most 4.5mm metal shooting BB guns don't have hop-up.

[arevaloanthony]

btw if you still dont know the use of the extra knob that came with it... its for the adjustment of the hop-up that is located on the front sight. :)

[switchingtomac]

@arevaloanthony Do you mean to adjust the sight?

[arevaloanthony]

thanks for showing this vid... i already modified mine, i was kinda pissed off when i learned that my uzi is shooting like a damn pistol but after seeing this vid i fixed up my uzi and its firing what its suppose too. thanks again ^_^

[switchingtomac]

@arevaloanthony You're very welcome!

[XB0XFR34K]

how many shots per c02 powerlet?

[switchingtomac]

@XB0XFR34K About two good magazines and a bit more if you do not shoot in full auto.

[mazpr2025]

Sometimes it is not even worth it as it will kill accuracy big time, mostly so on a smooth bore. They do work similarly like a paintball gun by stretching or adding washers to make it charge more CO2, but like I said bbs will be all over the place. Sometimes it is even better to lower fps, and enjoy hitting targets back to back.

[n1i0c0k9]

um i misplaced a part of the mini uzi when i was trying to mod it and iwas wondering if u know any website i can buy separate parts for mini uzi and that part is the top cocking lug connecting to the cocking spring on top of the receiver

[switchingtomac]

@n1i0c0k9 I would try and find the part, may be hard to find it on it's own?

[takaKizne007]

Respond to this video... duel weild

[lukenadtisha]

do you know if there is any fps mods for this gun i would like mine to be a little more powerful??????

[switchingtomac]

@lukenadtisha I have not heard of any?

[firmgripondamac]

Success!!!! This things friggin nuts. Thx again for the modification.

[firmgripondamac]

Success!!! Its friggin nuts. Haha thx again for the mod

[switchingtomac]

@firmgripondamac No problem!

[videogames73]

@switchingtomac Could I just buy the gun and pay extra for you to do this?

[switchingtomac]

@videogames73 Sorry, we do not do any custom work on the guns prior to shipping.

[firmgripondamac]

Alright ill let you how it goes.

[firmgripondamac]

Ok i wanna do this mod. What are most likley areas that are to fail. is the back pin the only thing holding the lower reciever or are there more screws. Im kinda nervous to attempt this tho it is my problem if i fail and i understand that, semi auto is becoming lame. The vid is extremly clear but im afraid im going to run into something i didnt expect. Thx if u can answer.

[switchingtomac]

@firmgripondamac Just follow the video and you will be OK.

[SuperBreak100]

just performed the modification but it appears the gun doesn't have bolt lock mode, does it?

[switchingtomac]

@SuperBreak100 I'm not sure what you mean by "Bolt Lock Mode"? Can you elaborate?

[SuperBreak100]

@switchingtomac it's mean that when the mag is empty the gun won't stop

[HatesStupidPeople194]

mike u sound way different on this video lol

[switchingtomac]

@HatesStupidPeople194 Cold + Scripted + Large Diaphragm Condenser Mic = Broadcaster Voice.

[HatesStupidPeople194]

@switchingtomac lol gotchya man. dude do u facebook? it wold be nice to chat for quicker responses etc. i have a lot stuff id like to talk to u about

[switchingtomac]

@HatesStupidPeople194 Facebook name is "ReplicaAirguns"

[FPSAustralian1]

for people tryed this and failed !! 

[switchingtomac]

@FPSAustralian1 Huh?

[FPSAustralian1]

@switchingtomac its ment to say four --(4)

[switchingtomac]

@FPSAustralian1 Did you find this information in some sort of Wiki archive???

[FPSAustralian1]

@switchingtomac -- there are for dislikes -- soo they r probably the people who have tryed and failed ? lol

[switchingtomac]

@FPSAustralian1 Or maybe they just don't like the video? The mod is too easy to fail at!

[FPSAustralian1]

@switchingtomac maby that to?

[rampagemcpherson]

Can you shoot it

[JUNAID187]

what does the r stand for in semi auto mode ?

[switchingtomac]

@JUNAID187 It stands for Repetition:

A = Automatic

R = Repetition (Semi)

S = Safe

[xXOrGAzMZXx]

@switchingtomac su divertido cómo usted tiene el PP. bola de la pistola, pero no la uzi real

[switchingtomac]

@xXOrGAzMZXx English please.

[jayng197]

awsome

[xRandomBEASTx]

Wait 50 minutes? Or 15 minutes?

[switchingtomac]

@xRandomBEASTx 15!

[patriots1109]

I done this modification on my 6mm version of this gun and I must say its a lot more fun in full auto mode now :D

[shackkalashnikov]

Thanks for the video. It took me longer to find parts that I dropped than it did to complete the conversion. UZI BB gun + 5-15 minutes=happy switch!

[switchingtomac]

@shackkalashnikov Glad it helped, those parts are slippery!

[2011purespeed]

can u do the mods urself before u sell them

[switchingtomac]

@2011purespeed Sorry, we don't do any mods.

[BrandonHenrich]

Y did u say it so slow its anoying

[switchingtomac]

@BrandonHenrich I didn't force you to watch it...

[odst201]

i like that to most airgun reveiws arent high quality but your videos are and i think thats awesome

[switchingtomac]

@odst201 It does make a big difference! Thanks!

[SlickPopz]

@switchingtomac Modiifing the uzi, does it hirt the gun being on full auto?

[switchingtomac]

@odst201 I would not say it hurts the gun but you do end up shooting more rounds in less time putting more wear and tear on the gun. You don't have to shoot all the time in full auto but it is a lot of fun with this gun!

[odst201]

cool i think you do the best airgun reveiws i live in alberta and your videos really help with the laws and safety and such thank you

[switchingtomac]

@odst201 Your welcome, it's an awesome sport and I like making it better for everyone, even the cops!

[odst201]

i was just wonder becuase i was thinking of buying one form your online store

[switchingtomac]

@odst201 My business partner Marvin, has a lot of retro Air guns. If you are interested he will fill you in on what he has, he usually has a few of them in various conditions and prices.

[odst201]

have you ever done a vid on the diasy m14 replica

[switchingtomac]

@odst201 No, I don't own it, I don't really have much retro stuff. That is a nice piece though!

[switchingtomac]

@ifartwell It uses more, if you just unload without letting go of the trigger you probably won't make it through two magazines, but if you hoot in full auto bursts you can get two magazines out of it.

[RejectedManiac]

Where is the video of you firing this thing in full auto?? I mean who would want a semi auto bb gun uzi? lol I just want to make sure it's what I want to purchase

[switchingtomac]

@RejectedManiac I haven't made a full on shooting video for this gun, been waiting for better weather and then I will be doing lots of shooting video for lots of guns :)

[RejectedManiac]

@switchingtomac Sweet. Hope to see a lot of fully auto's soon

[matrixboii]

did you had any problems with this modification

[switchingtomac]

@matrixboii Nope. So far so good and very easy to do.

[TheShadoman123]

is this the one that fires .177 cal bbs

[switchingtomac]

@TheShadoman123 Yes - 4.5mm .177 cal.

[freezepop90]

what does the r stand for

[switchingtomac]

@freezepop90 It stands for Repetition:

A = Automatic

R = Repetition (Semi)

S = Safe

[marshypenguin]

Hi, could do a video with this uzi firing full auto?

[switchingtomac]

@marshypenguin I will most certainly do a video of this gun firing in full-auto mode and it will be awesome!

[marshypenguin]

@switchingtomac cool!

[trreehugz]

got the gun saturday loved it and watched your demo on how to mod it worried about trashing me new gun but did it in about 10 minutes .awesome thanx

[switchingtomac]

@trreehugz It's way more fun in full auto! Glad you had no problems.

[rockandrollrules]

can you help me out i gonna buy this gun is there instuctions in the manual to take it apart so i can put it back together when i do this

[switchingtomac]

@rockandrollrules It's pretty easy to take put back together, you should be OK.

[switchingtomac]

@hordefromthenorth I just meant, maybe I will do one down the road...

[switchingtomac]

@hordefromthenorth You never know...

[212wdgsdg]

Hey, I'm just trying this mod and I was wondering if you really have to remove the bolt.

[switchingtomac]

@212wdgsdg Maybe not, I was just following the instruction given to me, let me know if you don't need too? It only takes a second to remove it so I did it....

[bfgguns]

Great tutorial! Too bad full auto is illegal here... :(

[switchingtomac]

@bfgguns The gun comes in full auto already, it's not your fault if the little nub somehow broke off??? So even full auto BB guns are illegal too??

[bfgguns]

@switchingtomac

Yep, anything over 0.5 Joule is illegal to have full auto even airsoft guns. This is a and this is the truth the "War Weapons Control Act". As you would be able to kill with airsoft guns LOLOLOL German gun laws= Monkey laws.

[switchingtomac]

@bfgguns I think if you used a large enough rubber band, even a full auto rubber band gun would be illegal in Germany?

[bfgguns]

@switchingtomac

That is not declared as "firearm" and therefore legal I guess because the projectile needs to be accelerated in a barrel to be a firearm.

[switchingtomac]

@bfgguns There's your market: non-barreled high velocity rubber band machine guns!

[phgHunter]

Really good tutorial.

[switchingtomac]

@phgHunter Thanks, this one took a bit with all the narrative and photos...

[mwmwmwmwmmdw]

if you buy another kind of uzi will it have a full auto mode because i wonder why it is this gun but not many others?

[switchingtomac]

@mwmwmwmwmmdw I am not sure about other makes or models of the UZI? I just know about the Cybergun 4.5mm Mini UZI.

[mwmwmwmwmmdw]

@switchingtomac

well i have an airsoft pistol that fires in auto-matic and so do my assault rifles?

[mosniper831]

wait is this also needed on the us version's ?

[switchingtomac]

@mosniper831 I believe so, I don't think the US 4.5mm BB version has full auto either from the factory?

[mosniper831]

@switchingtomac eee guess the bfh would come handy thing :p

[switchingtomac]

@mosniper831 "bfh" ??

[mosniper831]

@switchingtomac Big Fu*ken Hammer :p

[switchingtomac]

@mosniper831 I guess that would work but your Mini UZI would never look the same again :)

[mosniper831]

@switchingtomac a smile is priceless ? :p

[yourjuststupidasshit]

Thanks for another great video!

[switchingtomac]

@yourjuststupidasshit Your welcome!