A Magnet Powered Generator May Be Possible!

[Rick007191]

Great to see this video....

Are you searching for more free energy generator plans?

Go to Google, search for "Top Magnet Generator Free Energy"......

Click the First Result (Skip the Advertisements)....

[robvh2]

HOW exactly are your "shielding" the magnets?

[lirpa21]

can you tell me how you shielded the magnet? i am working on a theory on how to convert the force of a magnet into electricity, your idea can really help my progress.

[coasterpro]

@lirpa21 I believe you can use any material suitable for making a magnetic core. Typically iron, nickle or cobalt. However your progress is soon going to be impeded by a simple fact, which is that the magnetic force is not a source of energy. We can use magnets to generate electricity, but the energy has to come from somewhere else, such as a hand crank, windmill, water turbine, etc. No amount of shielding is going to change this or make the conversion process more efficient.

[Gnc8man]

aren't normal generators powered by magnets as well?

[coasterpro]

@Gnc8man No, regular generators are not powered by magnets. Magnets are used to convert mechanical energy into electrical energy. They are not by themselves a source of energy.

[dildoinurass]

So you made the exact opposite of what they need.....

[gaboferra88]

¿How do you shield the magnets?

[MrDaveythewavey19]

troll video. lrn2conservationofenergy

[Lowfrumdope]

what did you use to shield the flux lines? i really want to know even though i dont think that would even help, i mean think of it this way when u try to repel one magnet from another so that another magnet can be introduced into the field that magnet will resist being introduced. the big slap in the face, the real catch is that the outer flux lines are weaker than the inner ones. if it was the other way around all of this would be so simple.

[bmcvay12311]

They made one about ayear from my comment

[33MrSmiley]

Aren't there magnets that are inactive, but become active when electricity is applied?

I think you would have more luck with that, because it allows tremendous flexibility for an intricate design and system.

[mikeccuk2006]

no net gain = same as a pendulum

[rubikscubix1]

the magnet is still stuck there by the same pole. When the magnet comes closer yes it does gain speed but it's not enough to push it through because it's still pulled back to the magnet.

[thepianoaddict]

Yea well I tried to make some sort of wheel that would never stop (forgot the name but you all know what I mean :P) and figured the magnets needed shielding. but ehm... How did you do it? Isn't it like sort of impossible? I mean you could make a generator out of it and have free electricity but where does the energy come from? Do magnets die out over the years?

[thepianoaddict]

@thepianoaddict nvm I already understand :D

[saracomm]

What material did you use to create a shield? Aluminum, Copper, Brass?? Do tell.

[JRBeaman]

" A Magnet Powered Generator May Be Possible!" except magnets do not have energy.

"No one has gotten it to work" because it would violate the conservation of energy. No such a thing as a "magnet motor" as seen on youtube. Fun experiment tho, lots to learn.

[Lvegeta999]

what matterial are you using to shield the magnets? I am not sure if this is possible.Dont worry because people are going to find out anyway. You are not going to get rich from this.

[NeeKroVal]

theres no MAY

[jib1000]

Perpetual motion is NOT possible. You'll never get there. FAIL

[bargainsbob]

I have tried shielding with no success at all, all it does is concentrate the flux at the edges of the shield so at the the unshielded side the force is, lets say near normal but the edge of the shield the flux will be much stronger. You can't stop the flux (lines of force) all you can do is alter their path.

[tdragon360]

dude.. you could just use the same conecpt as an stator moter - electromagnets comming on and off.....

[MechaLuigi3000]

heck, i bet i will succeed at this.. and I NEVER THOUGHT THAT THIS IDEA WAS THOUGHT B4!!! I maybe will just do it... i bet i knew the answer all this long...

I believe i will make that magnetic motor... well... generator. Lets see if i can pull it off by doing what i think it will work by physics in my side.

[DukeHastMich]

What about conservation of energy? you use up the magnets and replace em like batteries. :P

[captainpecan]

@DukeHastMich Not trying to violate the laws of physics. Just looking for that extra source of energy previously not noticed. No different than a windmill. But before a windmill was invented, most would have thought it was a violation of the laws. Now we figure in Wind as the energy source.

As far as the magnets draining and needing replaced like batteries.... Umm, they do not work that way. I'm not saying they would never lose their field, just not the way you describe.

[moonsmilelucide]

so what is possible?

[DieTheDeath]

@ greenlivingitup . com it shows how to build a free energy device with magnets

[Rotitomato]

You can only shield out repulsion that means you loose repulsive power, hence the laws of physics just kicked in. If you could shield out attraction that would make history, I keep failing at it.

[chrisofnottingham]

"powered only by the force of magnets"

Power \= Force

To make this work as a generator by attracting/repelling the magnets you have to keep rotating the magnets. This won't take much power for an unloaded generator. But when you load the generator, mechanically or electrically, all the work done by the generator will present itself as a resistance to movement in the rotating of the magnets. You are kind of using them as cogs. Unloaded they will spin quite nicely . Loaded, not so much.

[lennchma]

What about if those magnetic equations are not 100% correct? Maybe there is some variable or constant wich isn't included in nowadays equations and it makes our discovery of magnet generator unreachable? So if this could be true, we should stop discovering a physical problem for while and start to discovering a new 100% correct equations of magnetic law.

[aemakes2]

please tell me what did you used to shield magnet and were can I get some

[juicearibe]

Just words.

[kreuzundquer]

What about the law of conservation of energy?

[latinonyc7]

please continue making video :)

[rogerdpack]

why did you not continue this study?

[investor0808]

what is your opinion on the magnetic generator?

[FCKEVRY1]

I knew it! Really, I did!!!

[Khepramancer]

This shielding effect, is not a cancellation of the field-- but by adding field conducting materials, you create a magnetic circuit. In doing so, you are redirecting the lines of force (based on the saturation of the conductor, in relation to magnetic density). In essence, you are not so much shielding the pole, as you are redirecting, or redistributing the field lines... but I feel the benefits are there to be realized, nonetheless. Further experimentation is always needed, so good work.

[captainpecan]

And you are EXACTLY CORRECT!!! And that's why I added all the notations when I understood exactly what the effect was. I leave up the video simply because it does make you think, and maybe someone else will have more luck putting it to use than I ever did. I've moved onto much more fun stuff since then!

[mcskifter]

If only you could redirect magnetic fields without requiring energy... which we can't.

[MaxTv02]

the theory does work and there are magnetic generators, but everyone calls them crazy and plus theyre silenced and critisized because theyd put edison out of business not to mention the entire energy industry, ex. the oil industry.

[mattx12345678]

what is your shielding made of?

[ronmann606]

Wow this proves nothing. Wasted my time.

[captainpecan]

Glad I could help! Hell, you even wasted time to reply. A 2 for 1, woohoo!

[captainpecan]

Taking the time to read the annotations in the first 20 seconds would have helped you know. But thanks for making it my fault you cant read!

[datzfast]

actually i got a magnet to repel a metal washer today but then again it was just aligning a field.

[datzfast]

magnets do not attract or repel. they realign their magnetic fields thats all magnets do no repel metal

we have all been taught wrong. also i found out that equal force your talking about is no so equal as you might believe.

[Yurisoka]

What are you using as shielding material?

[fateofnames]

by the way, it's been done. Yes, we now have motors that run on magnetism. Your theory was correct. Bravo!

[mikedolson]

hey take a look at the halback array!!! that solve your problem

[quantumbits]

Mater and energy can not be created or destroyed.

Basic law of thermodynamics.

[KlevenRobert]

we don't even know why particles have mass, there's so mutch we still don't know, though i indeed doubt this guys approach will work. I think Nasa's rocket scientest have tought over this one more then once during breakfast.

[captainpecan]

I wish I had a dollar for every person who quotes the laws of thermodynamics, when they have no clue what they even mean. We are not trying to CREATE energy, just find a new way to use what is already here. An educated person will realize that that law has two sides. Not only can energy not be created, IT CANNOT BE DESTROYED! Therefore, every bit of energy ever used IS STILL HERE! There is no need to create any, I am searching for a way to REUSE what we've already got!

[zeropointprophet]

try bismuth alloy to shield

[pimgta]

i have a damn good idea for a genorator. geuss thats very possible to work. without all the problems you all have

[allenvincentjr1103]

the problem isn't shielding one whole side of the magnet (covering two poles). The problem lies where you cant shield just one pole of the magnetic field. the polls on those magnets are north/south long ways. try shielding one half of the long side of the magnet. The problem lies where there is no way to shield the magnetic field, just redirect them somewhere else. I have tried your idea on my own projects. That is how I already know what is happening in the magnetic shielding you are showing.

[shubus]

Tray a Halbach Array - no shielding needed for an essentially magnetic monopole.

[tonapah141]

u can buy der shielding online "mu-metal" sheilding...

[kdkinen]

what is the shielding made of?

[SteveMontuno]

so where can we get the shielding from and can we pull it out of an old telly lol

[dexro2005]

build the fucking generator :) 4 stars for now ;)

[stormWillClark]

the shielding has been figured out long time ago with the moon boots! Read up on that people.

[Gnomehunter802]

he wasnt saying he discovered sheilding, hes saying its implementation in a magnetic generator should, in theory, make it possible

[OwensReaper]

i've been thinking of things like this too, i've had ideas, but no way to try to make it. and i want to make it for my science project. hopefully this might help me.

[2hangover]

What is the shieldingmaterial??

[megaverse]

simple galvanized iron (zinc plated if you prefer) try bismut for fun it repels magnets ...alot of fun

[leschouettes]

How can you explain that Perendev is selling their magnet engines at € 25 000 the piece if they were fake. THey would be sued straight away. Think about it

[megaverse]

find me a buyer then we'll see ! try and contact him ...just that is all ready a major challenge.

[leschouettes]

I think you are GREATLY far away from the truth saying nobody ever managed to set up z engine working only with magnets, look around! Spend a couple of hours over the net.

You can a 100 W one for € 24 000 at Perendev for example.

Your video is very blurry.

Sorry for all this.

Ro

[captainpecan]

Sure, if that's all you spend is a few hours looking, you will find many people wanting to sell you a device that does not work. Show me one working device, that is proven to work. And that perendev you refer to is ran by a drill on the other side of it. It has been proven. Show me 1 device, please! I have spent YEARS researching, not just hours. If you seem to know the answer, by all means, post the link right here!

[xtom1973]

do a deep research on perendev. the pictures of the generators are faked, they simply took another product. also search for buyers of these generators. you will find none.

[Mza1942]

i thought they already built generators from this wow my work is farther than yours i have already built one and i can use it up to 120 volts. but not enough to really use i mean i can power a laptop but. basically its another imortal battery though right? i thought they already made the kinds that dont go out from friction o well strange what a 12 year olds mind can do right? like telekaneesis

[frankensteinmoneymac]

Yeah, strange the lies a 12 yr old mind can come up with......

[GUILDGOB]

so does it become a pot magnet?

[milkinsx6]

yes, and get rid of daf one-fps-cam -.-

[robwgibbons]

What are you using for shielding? I have designed a motor using a similar shielding/field-shaping concept, but have not yet been able to create an effective shielding.

Please PM me as soon as you can. I'll send you my design if it works.

[FreeMagneticEnergy]

Your video here only copies my video originally released on YouTube, January 21, 2007. (One Way Magnetic Shielding) Also documented on OverUnity(dot) com on April 21, 2007 as well; which allows for net gain. On October 19, 2008 YouTube suspended my channel showing how it's possible to have net gain.

On October 29, 2008 - I tried to visit another guy (larrylawrencejr)who posted videos about free magnet energy; his YouTube channel has also been suspended now.

You're simply duplicating my work.

[captainpecan]

Yeah, to be honest, about a week after I posted this video, I found yours also. We were onto exactly the same thing. I remember sending you a message as soon as I found yours also. I never claimed to be the first to ever find it, just that I figured it out. To be honest, I cant make a self runner with this either, lol. But I leave the video up anyway because you tube hasn't removed it.

[Magnetmotorman]

Bravo..However one does need to shield magnets IF you have the right configuration. I have found the right configurations. The name of my motor is called "The Tri-Metatron Magnetic Motor" I have a provisional patent on my machine. The way you over come the sticky spots is with Pyramid Magnets in the Rotor Assembly. They are magnetized parallel to the base. The tips of the pyramid magnets will be near "0" resistance. There will be some pull though, but so little that the rotor will move easily.

[PhotonDrive]

Is Fuel-Less Powered Drive really so complicated? One simply spins (by any means you like - petals, Air pressure, Solar Modules, etc.) some N/S/N/S/NS magnets to induce a current in surrounding coils - then channel with simple wire to stagger-pulsed coils which then repel magnets to make the wheels spin. Need I mention to engineers the intervening Batteries & Capacitors, for when a STOP SIGN takes effect? That's all you need: simple, cheap & uses different arrays for various sized vehicles.

[Nopiw]

"But in fact the equations show half the energy is lost."

That's what I didn't get. The Energy stays the same in my example. Have I overlooked a part in the video?!

[captainpecan]

You are solving your equation for "x" which is voltage in your example. I had the voltage from measuring the capacitors after the transfer. Therefore I must solve for "Q", or "E", or actual energy. That is when you see half the energy lost. The voltage in fact did not result in the 12.7 you show, otherwise, there would not have been a loss. According to the equations anyway. So even though the pulse motor shows more work, the actually energy left is roughly half.

[Nopiw]

I really appreciate that you do your own experiments and learn stuff by youself!

But there are some mistakes in your work and comments are turned off, so others might take your experiments as fact.

Energy is not voltage.

power = voltage * current (P=U*I)

energy = voltage * current * time (W=U*I*t)

There's an easy circuit you could build using a capacitor, a coil and a small IC. It can make up to 60volts with just a 1,5volt battery.

[captainpecan]

Actually, the energy in a capacitor is measured different. It is E=1/2C*V*V. I turned off comments only because I had an idiot posting curse words and calling people retards. As you watch the video's, I show the proper figure of energy. I only point out that when using a pulse motor, it appeared to show work done, following the trend of voltage, and not energy. Just an observation. Pulse motor was not a great method of measurement. The point was showing energy flows "through", and can be reused.

[Nopiw]

Charging a 4700µF cap with 18V. E=0,5*C*U² E=0,5*4700µF*(18V)² E=0,7614Ws Adding the second 4700µF in parallel. This doubles the capacity to 9400µF, so what is the Voltage then? E=0,5*C*U² 0,7614Ws=0,5*9400µF*(x)² square root(0,7614Ws/(0,5*9400µF))=x x=12,728V Each cap should have ~12,7V when you get them in parallel, not 18/2. It will be a bit less than 12,7 because you lost some Energy in the spark.

[captainpecan]

I know exactly how to use the equations. But in fact the equations show half the energy is lost. Or the caps would show what you suggest. Those first video's as I said, is only showing that work appeared to be done, "as if" the energy was not lost and the equation was not accurate. A pulse motor again, is not an accurate measure of work. The actual energy in the capacitors is not the point of the video's. The point is that there is any energy at all in them. The energy flowed "through"...

[Nopiw]

If you weaken a pole with a diamagnetic material such as bismuth you weaken the other pole exactly the same.

If you use Steal, Iron or any other magnetic material on one side of the pole you just deflect the magnetism sidewards, but the magnetic forces are still the same.

You can not shield a pole.

[PhotonDrive]

I get so SICK of these "Free energy" & "Overunity" exersizes! 20, 50, 200 years & NOTHING PRACTICAL! Stop trying to prove "philosophical point" & build some with big amp & volt output & get them mounted on a vehicle! Magnetic Drives by the millions have been pouring out of China the past 6 years, so quit sucking your dicks & get some generators teaming with them for CHEAP FUEL-LESS TRANSPORT! War, economy going under, people in streets: NO MORE TIME FOR FOOLING AROUND!

[captainpecan]

It's just metal flashing I got from a local hardware store. Galvanized works good, tin would work fine too. Just layer it, with rubber between sheets works great. This is real guys, very easy to duplicate. Only problem is, when you start working with it, it's pretty much useless still... lol. Other magnets are attracted to the shielding itself. But still a good thought provoking video.

[disclosure12]

thats it man!!

what material you use?

[Capsguru9]

What is the shielding? I want to test this concept so I can figure if this bs like all the other stuff with over unity magnet generaters.

[JakeKennes]

Hello Captainpecan!!

wht do you use to shield the magnets?

I would like to repeat your exeriments here!!

Jake

[r0sscun]

I'd like to invite all magnet motor inventors to unite that we may have shared ideas about this concept and to strengthen the concept itself to create a free energy world. Free energy does not mean perpetual motion. By 'free energy,' we refer to energy systems that tap into inexhaustible, ubiquitous, and clean sources of energy generation, such as solar, wind,

[midniight]

ROFLMAO THIS GUY JUST EXPLAINED IT ALL CALMLY making so many others feel stupid as hell ahahahah....hey, tell me how you shieled it!

[AshMan32]

This guy was born yesterday.

[Jay3205]

You can't make a magnet motor with this concept. It is true that one magnet will not be attracted to the other magnet due to the shielding. However, the magnet will now be attracted to the shielding instead, producing the same effect.

[captainpecan]

Lol... I figured that out! I do think it is interesting and may have some sort of use, but to be honest, I've moved WAY past this video. Stay tuned, I will be releasing A very impressive discovery of free energy I have. I'm leaving this video up, simply because it gets the mind flowing!

[stmk0]

but it's nothing new. I've seen designs using shielded magnets that work for the most part.

Tin foil is a hell of a drug.

[stawmy]

Correct! The inventor Floyd Sweet is claimed to have found a way to achieve a permanent oscillating magnetic field in certain materials, all tou had to do was insert the (oscillating) magnet into a coil, and you had electricity. I don't know if it's true, but it sure is a neat idea. Shame he died,we may never know...

[stawmy]

What do you mean by 'mono-directional electric current'? Not present in magnets!

Caps don't store voltage as such, they store CHARGE in the form of electrons and 'holes'.

Again, the current is said to flow when the electrons are in motion, however, this is not STRICTLY true, experiments have shown that the charge moves ahead of the electrons....

We are only acratching the surface when we talk about 'electricity', in reality, we know very little about it.

[datzfast]

all we know is the language we use to describe the effect we observe. we know nothing in reality.

[jallaguri]

Permanent magnets are objects that stores a mono-directional electric current. Pretty much the opposite of an electric capacitor which instead of storing electrig current without voltage, stores electric voltage without current. Energy is a product of voltage and current - with only one of those present, where the other is zero, there is no work done.

So, both objects contains POTENTIAL energy, but as soon as you start using it, either magnetism or the electric field will get weaker.

[datzfast]

the only way to weaken a magnet is to change the direction of spin of the electrons

within the magnet. heat or time are needed.

do you know another way?

[crippled82]

put it in a blender.

[jallaguri]

The inventor has just used iron or steel to guide the magnetic lines inside the iron from one pole to another - a shortcut. Hence there is no peripheral magnetic lines at one side of the magnet which will repel the magnets apart. No big discovery.

[aireng1]

what did you use for shielding?

[stawmy]

Stainless steel plate, 3mm thick.

[datzfast]

i desire to visualize the magnetic field

of the shield. any ideas?

[stawmy]

The old 'iron-filings-and-papaer' still works, but messy and unclear. An old t.v. gives a much better picture, but it will never be any good as a tv anymore!

[stawmy]

Shielding works, but you still have to turn or rotate the magnet and this takes energy out of the system. It LOOKS like it's working,but after a few minutes the system is indeed overcome by friction. This is the reason that the Steorn motor failed, i know, i've tested this theory, my motor ran no longer than 2 minutes.However, i DO beleive a magnetic motor is possible, Keep on experimenting,people!!

[backwoodsBrophil]

..(applause)..OK, I'll ask a critical question (and no I'm not that guy in the desert), if you disregard the repel on approach, well, you disregard the repel on departure, so there's still no "net gain". SOO...how can you ONLY remove repel on approach and KEEP repel on departure?? By rotating the magnet?..that still takes energy??? BTW I admire your curiosity

[stawmy]

Stainless steel makes a good shield, for people wanting to experiment further.I decided not to use shields but ROTATE the 'fixed' magnet by 90 deg. The rotating magnet doesn't 'see' the fixed one until it's too late, causing a powerful repelling. BUT the energy used to rotate the magnet drains the system. My model was hastily built, so also not perfect. It seems that a magnet motor only has just enough energy to power itself and any external load will stall it.

More research needed....

[datzfast]

think outside the box , your loosing energy

to rotate the magnet. that lost energy is going some where. use 2 systems that give the lost energy to each other. the net is 0 lost

energy if a mechanical devise can give it back

to each other. a see saw work on this principle. a spring works on this principle

a magnet works on this principle.

[Jay3205]

What you are describing is a perfect transfer of energy between two systems, which is impossible. For that to occur, all friction, air resistance, sound, and heat loss must be reduced exactly to zero... impossible.

[Joonaskokkonen75]

There's potential in this kind of generator researching. During 90's in Hungary they took this development forward. Later in Australia same was done. But would encourage to google for 'mini ro-mag'. It takes you to a site with plenty of details concerning magnet generator for couple of volts.

[NitroNerdPaul]

the big bang was comprised of pre-existing energy

[skibee50]

So what do you use for shielding material?

[NitroNerdPaul]

This argument is boring... out

[NitroNerdPaul]

And magnets are not made by "pushing energy into them" they're made by aligning the molicules in said object to become a magnet.

This can be achived in many ways such as sending high current electricity through it or putting it close to a strong magnet. And taking the magnetism out of a magnet may produce a VERY tiny bit of energy but it takes much more energy to magnetize one.

[captainpecan]

I was not referring to them as batteries. The magnetic domains are aligned by inducing current. Which is why after they are aligned you can pass them over a coil and get current back.

Yes, you can align the domains by using a much stronger magnet, but how do you think that magnet got it's domains aligned?

Simply transfer of energy, from one form to another. So yes, there is energy in magnets, it's just not in the same form.

[megaverse]

indeed what i was saying ...it's a question of magnetic domain that gets aligned and not a quantity of electron stuck in the magnet !

[stawmy]

I do not believe this to be true, a magnet, once made will keep pouring out a field that is very strong and lasts for maybe 100 years.

This is more energy than it took to make it, so a magnetic motor IS feasable, it is merely an engineering problem.BTW we are not breaking any laws here since the magnetic field (according to classical theory)is the combined sum of the monopoles of the aligned atoms, this monopole is created by their SPIN,

That, or the textbooks are all wrong.

[Jay3205]

I agree. However, most people build magnet motors to try to achieve a "free energy" device. This means the use of the motor isn't allowed to wear down the magnet beyond its normal rate of power loss.

[datzfast]

are not magnets used in motors already

no one worries about them used up in any motor.

[Jay3205]

Magnets in current motors are not used in ways that would de-magnetize them. However, there are ways in which a magnet can lose its power.

[captainpecan]

The search for free energy does not mean we are trying to create energy. Simply that we are trying to harness energy that already exists in more efficient ways. No laws of physics are broken any more than solar or hydroelectric power does. Kinetic energy does not cost money, yet it can produce electricity. More efficient ways to harness kinetic and gravitational energy is not impossible, in fact the laws of physics proves free energy more than it disproves it.

[NitroNerdPaul]

Free energy implies overunity, which is in fact imposible. But harvesting solar or hydroelectric power is by no means free energy! And physics COMPLETELY disproves any chance that free energy is possible because free energy is making energy not harvesting or transfering it.

[captainpecan]

Sorry, I agree and disagree with you. Free energy DOES NOT imply overunity. The problem here is the vast misunderstanding of the true meaning of the words overunity and free energy. They DO NOT mean the same thing. True overunity is in fact IMPOSSIBLE, I agree. But free energy IS POSSIBLE. If you were to combine a little electricity and some kinetic energy, you could get more electricity out than you put in, but still only unity at best. Yet the extra electricity would be free energy still.

[datzfast]

its find and dandy to say the laws of physics

cannot be broken except when scientist talk about the big bang theory where vast amounts of energy and matter jump into being.

[NitroNerdPaul]

free energy does NOT exist!!!!!!!!!!

[captainpecan]

Thanks for your BRILLIANT insights! By the way, I dont recall saying that this was free energy? I simply figured out an interesting method that may be used in some way to help harness the energy that is already present in permanent magnets.

[NitroNerdPaul]

There is no pre-existing energy already present in permanant magnets.

[captainpecan]

So when you pass a magnet over a coil, you dont get energy generated in that coil? If you dont have any energy in your magnets, you need to buy some new magnets.

So how do you think a magnet is made? Energy is pushed into it! Look it up. Therefore there is energy in permanant magnets. Harnessing it in different ways is the mystery.

[NitroNerdPaul]

When you pass a magnet over a coil the energy does NOT come from the magnet it comes from the energy that is used to pass the magnet over the coil that is converted into electricity.

[captainpecan]

Noun * S: (n) energy, free energy ((physics) a thermodynamic quantity equivalent to the capacity of a physical system to do work; the units of energy are joules or ergs) "energy can take a wide variety of forms"

Princeton university says your wrong. I tend to believe them.

[NitroNerdPaul]

How does Princeton university say I'm wrong?

[BloodofBrude]

What if you were to arrange the magnets in a differant manner? For example, setting them up diagnally or one closer than the next? I thought about creating one myself about a year ago but realized that the arrangement of the magnets could also play a role on the inertia of a rotating magnet. What do you think?

[Thorsupremecommander]

very interesting shielding material, what sort of it did you use?

[sirmikeydotcom]

Perpetual magnet motor:

/watch?v=us7YB7eiOeQ

[calfellows59]

Cap, I just found this video where he is using neo magnets taped to a wheel & a household transformer below (unplugged, faint magnetism) to push/run the wheel. The transformer has two coils, and he is talking about using one to pulse/spin the wheel with photocell, and then the other coil as a collector, collect electricity. This guy is something:

/watch?v=8LG3QPUcijE

[megaverse]

too late it's not there anymore ...must of been real lol

[calfellows59]

Free Electricity 90v, 200ma, 13watts

/watch?v=Kdup42Epq0o

Sound Waves Create Electricity 56 Volts

/watch?v=aFSwQouGPcA

One will power the other

[calfellows59]

Two More Options:

Timing Belt or gears

/watch?v=9GlhV0-vHuc

Lever action timing

/watch?v=z6-OiD5h6Kc

cal

[sirmikeydotcom]

This may help you with the timing:

/watch?v=6LAUAsIosjc

[matt4magic]

You are wrong. A magnet does not generate a number of separate fluxes. If you shield the south pole of a magnet (which is possible) you alter the flux from south to north, not just at the south pole, no matter where the shield sits. It could also very easily be proven using field potentials that given this there are no way to enter a field for less energy than it takes to exit it.

[peterweetbeter]

Correct, but I've already seen this explanation by Mike Brady (in German): borderlands[dot]de/net_pdf/NET­0307S4-12.pdf

[mcaddc]

Have you tried using the magnetic shielding material which is commonly used in computer hard drives?

[captainpecan]

actually, yes I have been working with that too. What you are referring to is call MU metals I believe. They are a descent shield, but to be honest, I've found that a couple layers of thin tin with rubber insulation actually does a much better job, go figure.

[sirmikeydotcom]

Perendev is successful /watch?v=PFGiWiXMHn0,

The solid state generator coil is the thing to watch for, no moving parts.

/watch?v=pvLuQOKOVXQ

[captainpecan]

Unfortunately that Perendev is a scam. It is being driven by something, such as a drill, on the other side of the wheel. The video is edited and fake unfortunately. The other, I agree, solid state generator is an interesting concept I do not know nearly enough about.

[sirmikeydotcom]

Just need some sort of timing, either gear or lever, to move or shield the outer magnet(s) like this: /watch?v=z6-OiD5h6Kc

[sizzlassiei]

why is every video on youtube out of focus? it's like a conspiracy or something.

[captainpecan]

Actually, that's usually due to the compression youtube does. But in this case, I'm working with junk equipment, so this one is my bad!

[dreckka]

Hmmm...

Interesting.

Worth looking into.

[captainpecan]

This is not fool proof shielding, the real trick would be figureing out how to shield the magnet, then shield the shielding itself.

I have tried layers of non-attractive materials, such as aluminum. Made no noticeable difference at all.

But, I still believe this is worth taking note of, as it is possibly a way actually accomplish a net gain if used properly.

[captainpecan]

I used galvanized metal flashing from lowes. Tin may work better. I just made layers of the attractive metal, seperated by rubber. For those magnets, it took 3 layers to totally deaden the magnetic field. But, even with 3 layers, it is only about 1/8 inch thick total shielding. Do the same to both magnets and you can duplicate my results. Neodymium will most likely require more layers obviously.

[jackburtonsk]

thank you for your time in makeing this well reserched video on sheilding. what did you use as sheilding? being a researcher myself, im curious. thank you.