you had the timing better when you were using the hallow core.
you should use smaller magnets for the halls that are shorting the coil so the dwell time does not cover the entire pass of the magnet. or am I missing something? the reed you see in this vid is shorting the genny coil.
OK very good work but where is the mesurement of current out and calcul of effeciency ! le rendement ?normalement si vous absorbez la "backEMF"et la réinjectez dans la batterie vous êtes sur unitaire comme le prétend Ismael et sa voiture??
Woopy: You built a beautiful setup. I started a thread on overunityresearch for this setup in the "Inductive Kickback Circuits" section. The name of the thread is "Woopy's Shorting Coil Test."
Your setup is very solid and has lost of potential for experimentation. I will comment there and please feel free to join and discuss. Ca serait un grand plaisir d'en parler plus avec vous si ca vous interesse.
I really enjoy your videos, and can very much appreciate the work that goes into creating & re-creating circuits........not to mention actually building motors & rotors and things.
you had the timing better when you were using the hallow core.
you should use smaller magnets for the halls that are shorting the coil so the dwell time does not cover the entire pass of the magnet. or am I missing something? the reed you see in this vid is shorting the genny coil.
3 Pole Monopole Back-popping
min2oly 1 year ago
OK very good work but where is the mesurement of current out and calcul of effeciency ! le rendement ?normalement si vous absorbez la "backEMF"et la réinjectez dans la batterie vous êtes sur unitaire comme le prétend Ismael et sa voiture??
thanks for your work
gilbondfac 1 year ago
another excellent demonstration of coil shorting. thanks
harpbloke 1 year ago
I am admiring you and your work. Thank you, please continue. It is so pleasure to watch your videos.
scienculo 1 year ago
Woopy: You built a beautiful setup. I started a thread on overunityresearch for this setup in the "Inductive Kickback Circuits" section. The name of the thread is "Woopy's Shorting Coil Test."
Your setup is very solid and has lost of potential for experimentation. I will comment there and please feel free to join and discuss. Ca serait un grand plaisir d'en parler plus avec vous si ca vous interesse.
User2718218 1 year ago
Well done Woopy !
Why does it have a sine wave as the output ?
Is the coil in resonance with the AC cap in series ?
How much DC voltage do you get after a bridge rectifier ?
Why don´t you just pulse the shorting all the time and not only at the peak top ?
Shorting and opening all the time will get you probably much more voltage.
Regards, Stefan.
overunitydotcom 1 year ago
GREAT work Woopy !!!
I really enjoy your videos, and can very much appreciate the work that goes into creating & re-creating circuits........not to mention actually building motors & rotors and things.
rave154 1 year ago
Find that your video generating is not hollow core coil, the coil seems to have filled the middle of the object, may I ask what is it?
yx630514yx 1 year ago