Actual build time was around 3 hours. This excludes gathering/purchasing of materials. A time consuming part was figuring out a good combination of Lego parts to form the armature frame to mount the solar cells and wind the wire on. Glueing the small gears squarely in the hole of the magnet took some time.
That's a great idea to integrate this into a Lego star wars ship or space station. It would be cool to place it by a window and have something spin whenever the sun shines on it.
That's pretty cool looking, how long did it take you to build it?
Plus have you thought of building a Lego star wars ship around the set up you've got there, kinda like the center of a space station or a out post power plant?
@memoz1991 - looks like the period at the end of the sentence is included in the details link, after the "htm" You can delete the period at the end to get to the details web site.
@spanglerangle - really just like any motor. In this case, light shinning on one solar cell at a time generates an electric current to run through a wire coil. The current creates a magnetic field around the coil. The large magnet positioned on the base plate and the coil magnetic field are positioned to repel each other. The repelling force causes the movement of the coil assembly. Each solar cell when positioned in front of the light takes it's turn to generate a coil magnetic field.
hi guy nice video, my son was always building stuff with lego LOL, any ways you might want to look at this video { FuelBan Levitation Is IT OR Is It Not Levitation.wmv } keep making the videos guy, thanks, thom in scotland.
Wow, Can you tell me if you have four cells in total, the volts needed and is one winding hooked up to two cells and the other winding is wired into the remaining two cells? Was amperage more important or voltage to get this to turn as well as you have? wow!!! that's realy cool.
Yes, four solar cells are used. Solar cells on opposite sides are hooked to the same coil. The polarity of the two solar cells are connected to the coil in reverse: e.g. the + of one and the - of the other are connected to one end of the coil. This way the solar cell facing the light will always result in the current flowing in the same direction relative to the permanent magnet located below. Be consistent in wiring the second set of cells so the two sets are not working against each other.
The magnetic force is proportional to the amount of current so the amperage is more important than voltage. I used the solar cells available from Radio Shack with 0.3A and 0.55VDC. To determine proper wire length, use Ohm's law V=IR. Use the known voltage and current of the cell to determine the amount of resistance needed. Find the resistance per foot value of the magnet wire you are using to determine the length of wire needed for each coil. Be consistent on the wiring and have fun :)
Hohow about a how to
nbrwn9 9 months ago
thats so sick!!
circlemer 10 months ago
SAY WHAT!?!?
SuperNoobdude 10 months ago
LEGO's :D I''ve once build a bedini circuit lego machine thingy --> Lego is ideal for testing stuf.
killerbeenl 11 months ago
magnets
Adrian5893 11 months ago
Actual build time was around 3 hours. This excludes gathering/purchasing of materials. A time consuming part was figuring out a good combination of Lego parts to form the armature frame to mount the solar cells and wind the wire on. Glueing the small gears squarely in the hole of the magnet took some time.
That's a great idea to integrate this into a Lego star wars ship or space station. It would be cool to place it by a window and have something spin whenever the sun shines on it.
JohnFMUTube 11 months ago
That's pretty cool looking, how long did it take you to build it?
Plus have you thought of building a Lego star wars ship around the set up you've got there, kinda like the center of a space station or a out post power plant?
Mrbandit81 11 months ago
Hmm, thats pretty neat
ChevyToughRebel 1 year ago
nice.................
francisroan 1 year ago
:O
wwwKx 1 year ago
does it work in sunlight?
dustinkervodka 1 year ago
the details link doesn't work :(
can u plz sent me the right link, Thanks in advance
memoz1991 1 year ago
@memoz1991 - looks like the period at the end of the sentence is included in the details link, after the "htm" You can delete the period at the end to get to the details web site.
JohnFMUTube 1 year ago
whats the use of this
invis45 1 year ago
@invis45 Amusement, I would guess...
kattooMC 1 year ago
free energy
miszczmateusz 1 year ago
cool i like it yearrrrrrr
vuidehoc46 1 year ago
not the most stable thing ever at the beginning. but at least it works
benjaminbreame 1 year ago
were do u get the waterpumps and this??
CRAZYLEGOSMAN 1 year ago
thats pretty cool
geminirat60 1 year ago
how does it spin?
spanglerangle 1 year ago
@spanglerangle - really just like any motor. In this case, light shinning on one solar cell at a time generates an electric current to run through a wire coil. The current creates a magnetic field around the coil. The large magnet positioned on the base plate and the coil magnetic field are positioned to repel each other. The repelling force causes the movement of the coil assembly. Each solar cell when positioned in front of the light takes it's turn to generate a coil magnetic field.
JohnFMUTube 1 year ago
Its really cool, but Not really strong
Mppgangster 1 year ago
your a genius
mastax1234 1 year ago
Cool!
LEGOBUILDER123211 1 year ago
omg thats soo awesome!
Srlancelot39 1 year ago
That Sir is very impressive, really very cleaver.
bartleby451 1 year ago
cool
onLove007 1 year ago
hi guy nice video, my son was always building stuff with lego LOL, any ways you might want to look at this video { FuelBan Levitation Is IT OR Is It Not Levitation.wmv } keep making the videos guy, thanks, thom in scotland.
fuelban 1 year ago
that is AWSOME!
MasterKnarf999 1 year ago
i want instructions!! lol
LordDecapo 1 year ago
cool
fagogarbejde 1 year ago
whats the torque on that?
cory1915 1 year ago
@cory1915 a rough guestimation would be 0.0001 in-lbs
JohnFMUTube 1 year ago 2
@JohnFMUTube
wow...not very useful...but creative
dragonparty2 1 year ago
@JohnFMUTube haha yea
liljam97j 1 year ago
Could it actually power something, or is it relatively weak?
artoslo 1 year ago
@artoslo it is relatively weak. You could attach a small light-weight fan blade and feel a little breeze.
JohnFMUTube 1 year ago
you could build fifty million and make a tank....
just a thought....
ninggy369bhagwandin 1 year ago
very good idea! 5 stars Of 5 stars
Alexutube7 1 year ago
Вентилятор ПРЯМ, чем сильнее солнце, тем быстрее крутиться !
raferti7 2 years ago
try putting another set of magnets on top to reduce bouncing
theret5 2 years ago 11
@theret5 That is an excellent idea!
JohnFMUTube 1 year ago
@theret5 and balance the whole axis.
vikenemesh 1 year ago
very nice man .
gubalak 2 years ago 3
excellent.........
armand009 2 years ago 8
Did you make the coil yourself..?
UntakenNick 2 years ago
Yes, I made the two coils myself.
JohnFMUTube 2 years ago
jajajajaj apoyo a samuelbibi26 hablen en español!! Yo digo que el proyecto esta muy interesante..
frcz10 2 years ago
mejor hablen en español
samuelbibi26 2 years ago
Let's give credit where credit is due.
This is a Mendicino Motor.
MaterSammichMan 2 years ago 4
Wow, Can you tell me if you have four cells in total, the volts needed and is one winding hooked up to two cells and the other winding is wired into the remaining two cells? Was amperage more important or voltage to get this to turn as well as you have? wow!!! that's realy cool.
Nullflux8ight 2 years ago
Yes, four solar cells are used. Solar cells on opposite sides are hooked to the same coil. The polarity of the two solar cells are connected to the coil in reverse: e.g. the + of one and the - of the other are connected to one end of the coil. This way the solar cell facing the light will always result in the current flowing in the same direction relative to the permanent magnet located below. Be consistent in wiring the second set of cells so the two sets are not working against each other.
JohnFMUTube 2 years ago
The magnetic force is proportional to the amount of current so the amperage is more important than voltage. I used the solar cells available from Radio Shack with 0.3A and 0.55VDC. To determine proper wire length, use Ohm's law V=IR. Use the known voltage and current of the cell to determine the amount of resistance needed. Find the resistance per foot value of the magnet wire you are using to determine the length of wire needed for each coil. Be consistent on the wiring and have fun :)
JohnFMUTube 2 years ago
Thanks for your informative response. I'm going to give this a shot, it looks like an interesting conversation piece.
Nullflux8ight 2 years ago
cant w8 to se it in a lego car
how did you do that
315cesar 2 years ago
Very Nice !
I did a video response with mine.
5 STARS
goldslinger 3 years ago 3
cool how you do that
dragonfire1505 3 years ago 2
wow... I tried to make one like that and I guess I had the motor specs wrong because I fried the motor after it started to spin really fast. :(
autonomous2010 3 years ago 2
Brilliant
mtncal 3 years ago 2
erm... have you thoght about using it in a model?
nocturnsbro 4 years ago 2
the motor may have limited torque but that is a good idea to try. We'll have to think of a good application to try.
JohnFMUTube 4 years ago
so cool.
a+++++++++++++++++++
Alexutube7 4 years ago
4 stars
Thorsupremecommander 4 years ago