HHO High Voltage 140 - 2500 Volts and Arc Welding Device Part 1

[ALexskript]

Hi! Did you tried to plug the Arc to 220 AC? I don`t have the Arc cause it expansive. My cell is composed of 10 plates with 2mm gap and i am getting 1 LPM at 12v 20A or 3 LPM with 45A

So can you try adding high DC voltage to some stainless still cell made of plates or tubes.

Thanks!

[saviouremmanuel]

MAN U GUYS SU K AT THIS!!! HAHAHAHAHAHAHA : D

[palehorsepalerider]

stick with your day job...please

[gfl110]

You Must Be Kidding

[water2gashawaii]

Its not a fuel cell. That is a misnomer.

You should use sodium hydroxide instead of kool aid.

And you should go straight from the battery to the cell forget about the rest.

[pjckac1]

To: water2gashawaii

It is a fuel-cell what are you talking about. Regarding sodium hydroxide I will not use it. Any vapors that contain sodium hydroxide that may touch aluminum it was destroyed. I have gone straight from the battery and in the demonstration I show the difference between battery & the high power supply in the comparison test.

[water2gashawaii]

No its not. A fuel cell converts hydrogen and oxygen into electricity. These cells are electrolyzers. They do the opposite. When we in the HHO biz call these fuel cells, we look stupid to the scientific community.

[merlinspower]

Hello Pete, Nice to see that you are Back ! I understand what you are trying to share with All  of the " HHO interested."

Stan Meyer said it best, He attempted and succeeded in High output HHO, by Pulsing High voltage with low amperes.

Everyone watching this video about electrolyser's and hydrogen generators , should remember one very important fact, when you build your device it is an on-demand, so you are changing (safe water )into an explosive Gas as needed

[HHO4ALL]

Here are some suggestions that may help.

You should look into HHO Scrubbing. There are several bubbler designs that people have come up with that do a great job of filtering out the harmful vapor from sodium hydroxide or potassium hydroxide. I would recommend potassium hydroxide (KOH), because it is said to be the best electrolyte you can get.

You should also be sure to only use stainless steel in your designs, because anything else will corrode too quickly to be useful.