Your an idiot dont cut it on an angle, your causing alot more stress you want to cut it straight off and you dont want to cut the sides you want one big root to come out the bottom. to be nice and healthy.
What's 'Co2 water'? Also, putting the clone in your mouth is likely to introduce bacteria, and after taking cutting you should put it under water and cut it again about 2cm further up the stem. This prevents the stem sucking up an air bubble that could kill it. You should also sterilize scissors and any other equipment that comes into contact with the cutting...C02 Water?
You can clone when the plant is flowering. You leave the leaves but remove the flowers. It is not a good thing to do, but it can be done. I have done it.
If you don't see any roots with in 3 weeks start over. I've been lucky, sprinkling a little more rooting hormone onto the top of soil around the stem and water it into roots, do this weekly. I also use peat pods to root in,and use a layer of perlite under them about 1/4" thick
You may be experiencing an Air Embolism from when you first cut the clones.You don't see it from editing but I put these in my mouth and suck and apply saliva to hold Powder with.
It's very diffacult to clone that way,success rate is 10-15% at best.I have been working on a bubbleponic float cloner,and I'm getting 100% success rate with just water & liquid hormone/root stimulator 5-15-5(from walmart)
I'm always looking for a better way to get it done...
Thanks for helping out. I guess there is just no way of getting around the hormone. I'll have to buy it. Do you know the recipe for the hormone? Can it be made at home? I'm very curious about what's in it.
The green light powder is at lowes,and the shultz powder can be found at walmart,both work just as well and cost about $5.00 it's easier to buy it than get out the chemistry kit and mix some up...(I'm not sure what hormone they use)
how many times do u spray water in the dome a day plus i see u only cut the tips y do u do that and what is the difference from other ppl that cut half of the leaf
wats the name of that gel
hteven 1 year ago
Your an idiot dont cut it on an angle, your causing alot more stress you want to cut it straight off and you dont want to cut the sides you want one big root to come out the bottom. to be nice and healthy.
420Marshinman 1 year ago
@420Marshinman Nah u want more totipotent meristemic cells exposed to turn into roots.
MrCockSlut 1 year ago
What's 'Co2 water'? Also, putting the clone in your mouth is likely to introduce bacteria, and after taking cutting you should put it under water and cut it again about 2cm further up the stem. This prevents the stem sucking up an air bubble that could kill it. You should also sterilize scissors and any other equipment that comes into contact with the cutting...C02 Water?
MyIndicaPatch 2 years ago
heyy nice vid, i accedently broke one of the branches on my plant and its only got like 2 cm of stem would i be able to clone that ?
nossey06 2 years ago
i heard 1/8 cuttings can root what is the % if u use gel stuff like 6/8???
CRYSTALICBAND 2 years ago
I always get 100% strike rate, but it has to be done under sterile conditions.
SuperBluehaze 2 years ago
bougieoriginal i did reserch on that and no i dont think u can clone when it is flowering
CRYSTALICBAND 2 years ago
You can clone when the plant is flowering. You leave the leaves but remove the flowers. It is not a good thing to do, but it can be done. I have done it.
SuperBluehaze 2 years ago
it started flowering and i put it back on a light cycle that would be used for the veg state
bushnewman 2 years ago
can i clone off of just one leaf??.....or would it be a waist of time
bushnewman 2 years ago
haha. it wont work
jenn1ifer 2 years ago
can you take cuttings from the plant while its in blooming stage
bougieoriginal 2 years ago
ye but when you start the cutting off its already goin to be bubbin
ganjamassive4480 2 years ago
It dosen't have a problem reverting back to Veg if done early into the bloom stage.
jonnyappleweed420 2 years ago
uummm ye woteva hahahahahha
ganjamassive4480 2 years ago
I've been good til week 4,after that they deform when reverting back to Veg.
jonnyappleweed420 2 years ago
Cheers!
fofinia 2 years ago
Hello thanks for the vid.
We put our cutting into soil after 2 weeks still no roots?
Will they root how do you think it will take.
fofinia 2 years ago
If you don't see any roots with in 3 weeks start over. I've been lucky, sprinkling a little more rooting hormone onto the top of soil around the stem and water it into roots, do this weekly. I also use peat pods to root in,and use a layer of perlite under them about 1/4" thick
jonnyappleweed420 2 years ago
does trimming the tips of the leaves really induce growth/roots for your clones?? never heard of that, sounds interesting.
arthurdickson 2 years ago
I've done it both ways and gotten similar results both ways.The theory behind it is, it will stimulate growth faster...
I have a friend that takes off all the leaves except 1 and cut the tips of them. He swears by it...
jonnyappleweed420 2 years ago
ive cloned 3 weeks ago with erything needed hormone cubesand tray and still nothing but white spore lookin things on the stem
davison1021 3 years ago
You may be experiencing an Air Embolism from when you first cut the clones.You don't see it from editing but I put these in my mouth and suck and apply saliva to hold Powder with.
I've changed it to cutting under water in a bowl
of root stimulator and root hormone liquid
jonnyappleweed420 3 years ago
k anither quick one if my mothers leafs dont react to light any more whats that mean
davison1021 3 years ago
Sounds like NUTE LOCK, flush 3X the amount of soil with water(1 gal pot= 3 gal of water) and feed in a week. you should see improvement in 2 wks.
jonnyappleweed420 2 years ago
What kind of shears are those? And where are they sold?
4Oh2Canaba0 3 years ago
Fiskars,made in the USA.
I got them from walmart,but I've seen them in lowes or home depot.
Peace
jonnyappleweed420 3 years ago
Is it possible to clone a plant without using the clone jell, but just rich soil, water, and sun?
zakoomu 3 years ago
Anything is possible when your a weed...
It's very diffacult to clone that way,success rate is 10-15% at best.I have been working on a bubbleponic float cloner,and I'm getting 100% success rate with just water & liquid hormone/root stimulator 5-15-5(from walmart)
I'm always looking for a better way to get it done...
Hope this helps...
Peace
jonnyappleweed420 3 years ago
Thanks for helping out. I guess there is just no way of getting around the hormone. I'll have to buy it. Do you know the recipe for the hormone? Can it be made at home? I'm very curious about what's in it.
zakoomu 3 years ago
The green light powder is at lowes,and the shultz powder can be found at walmart,both work just as well and cost about $5.00 it's easier to buy it than get out the chemistry kit and mix some up...(I'm not sure what hormone they use)
jonnyappleweed420 3 years ago
thx alot dude
coolgrowth 3 years ago
nice bro!
supgankstapoo 3 years ago
I spray them twice a day(morning/nite)
I cut more of the leaves when transplanted into 5" pots
jonnyappleweed420 3 years ago
how many times do u spray water in the dome a day plus i see u only cut the tips y do u do that and what is the difference from other ppl that cut half of the leaf
smoky281 3 years ago