Diesel 10 HO/OO Wheel Conversion

[TheRandomationStudio]

i did this with my di agnosti thomas annie and clarabel!

great minds think alike

[Stuingtion]

Is there a way to remove the magnets off Diesel 10 and put in Bachmann couplers?

[4Corry]

Can you but Trackmaster Edward, Henry, Gordon, James and Toby next and review them please and Also review you Percy please.

[alienfiles1]

that # 2 engine that is red his name is rhneas

[mrduckandBubbles]

Where can I get a set of Bogies that have two screw holes?

[thopsonline2fan]

how do you get it to run

[4Corry]

@thopsonline2fan He doesn't he uses a string

[MrLegotastic]

The engines name is skarloey

[thomasfan0619]

@MrLegotastic no i know i have 2 skarloeys ertls and it is rheneas

[Cheesegamer1505]

@MrLegotastic nope it's Rheneas

[TheShnizNite]

Hey, do you know if ERTL's are rare? I haven't collected since I was 8 at least, and I found a Thomas, James, and Percy in my attic dated around 1993.

[LJJ23ARSRUL]

1:25 rheneas

[96SmegHead]

Which kind of bogies did you use?

[ililil1231]

can i have one of your 199 take along models in the background or one of the ertl 199 models

[ililil1231]

can i have 1 of your 199 take along or ertl models

[RookieOliverfan10]

i make something simillar, i have tomy trackmaster train and take alongs trains, i glued take along Migthy Mac into a basic of a truck without coupling and, tata!

The engine is ready!!!!!!!!!!!

[mironlang]

1:17 his name is rheneas

[StupidJedi]

I would also like to know how you make a small metal toy train magically run just by slapping wheels on it...

[laky450]

how you maked the small fat controller please anwser !!!!

[blondieXproduction]

wheres the engine in the train

[illiniguy34]

the warning makes me feel like I'm watching an episode of Jackass (It's NOT you, it's just that there's a warning every time)

[RandA5156]

can they run

[TheNw1218]

Why use ERTLs and not the Hornby or Bachman models? They easily fit and run on HO/OO track.

[Monislawa220]

@TheNw1218

it's cheaper, and looks great!

[leokimvideo]

@TheNw1218 simple reason

cost..!

[TrackMaster555]

the narrow gauge one was called Renehas

[TrainsHornby]

@leokimvideo I have ertl thomas x2, bill, annie, henry, percy, george, duck, sir handle and peter sam. And even a thomas carry case with loads of small compartments to put the trains into. I used to collect them as a young child, will they be worth a bit of money nowadays? There all the original not modern remakes.

[JamesFan1991]

Is he the Grand Designer?

[fortdudley]

Conan the Barbarian ad's in front of Thomas the Train commercials. wow.

[trainboy7]

the pink red engine is rheneas

[thomasandferdinand14]

Why didn't you make mavis' bogie like toby's she has side plates too?

[super58173]

I thought lead was poisonous.

[leokimvideo]

@super58173 it's die cast steel!

[super58173]

@leokimvideo - No, didn't you use lead weights?

[shortround551]

could you make a tutorial video on how to maybe convert the various couplings exsamples magnet and ball socket

[jmannzzz]

1:18 He is Rheneas.

[cubedude11]

that is soooo cool!!

[gottilover28]

yu shud do lady !!!!

[Ombladon1998]

:))

[christianc6100]

at 1:18 the engine's name is renhas

[MLabovitz1]

HELPPppPpppPPPPppppppppppppppp­pppppppppp!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!(38474848483838484848­383838383299294847383838373484­848484847473)

[leokimvideo]

@desiredbard thanks, I am often corrected by people far younger then me

[HankAmericanEngine]

@leokimvideo I can help you identify many Thomas and Friends characters, if you like.

[leokimvideo]

@ALITITANIC I have not tried a HO with motor conversion. What I am eyeing off is possibly doing a large chugger ( interactive) to HO, still thinking about it.

[RandomRobloxian]

rah-ney-ess

[Sketchy2009Studios]

The End with Diesel 10 on the tracks reminds me of the cliffhanger ending in Misty Island Rescue where Diesel 10 warns the steamies about what is soon to come.

[leokimvideo]

@Sketchy2009Studios I can guarantee this is just by chance, I have never seen Misty Island Rescue

[songohan619]

you say rheneas with a short ass.

[leokimvideo]

@songohan619 It was the ass bit I was afraid of, I have noticed if I ever say something wrong here I never live it down, sometimes best if the loyal audience can tell me the truth

[huntwer2010]

will that diesel ten ever w\be in a episode of mad bomer

[gez021]

you say use the right screwdriver for the job , so why didnt you ? triangle shaped head and u use a posidrive driver ???

[leokimvideo]

@gez021 because I often think outside the square, and it was a personal test for you, well done you passed with flying colours

[LEON13858]

how did you make your fat controller .when i try to add legs onto the take along he just falls apart. seems like he is tool samll to modify

[leokimvideo]

@LEON13858 I will do a video on making the tiny fat controller, if you look one of his arms is falling off in the video..lol

he is really simple to make believe me.

[paflion]

well duh the red engine is renas

[brickmaster24]

All these take along videos are getting me excited for mad bomber ep 2, whens it coming weve been waiting for like two years, sorry just wondering please dont block

[trainsanddominoes4]

to me that looks easy

[mrduckandBubbles]

I have converted a Take and Play Ferdinand, a Breakdown train Flatbed, and a Sodor Supply Car.

[thomas71551]

thomas71551 the engines name is Rheas

[leokimvideo]

@thomas71551 thanks

[thomas20871]

The narrow gauge engine was Rheneas.

[leokimvideo]

@thomas20871 thank you

[roadwolf2]

the engine before your narrow gauge one is called diesel

[leokimvideo]

@roadwolf2 well, thank your for that

[cotchsteamrailway]

The narrow gauge loco should be running on 009 or N gauge track

[leokimvideo]

@cotchsteamrailway yes I know, but I only have HO, I believe it's the gauge that is the most popular, am I right there?

[cotchsteamrailway]

@leokimvideo OO/HO is the most popular, but narrow gauge etrl models run better on OO9/N track, but use OO track so I don't use the narrow gauge locos

[cotchsteamrailway]

@leokimvideo OO/HO is the most popular, but narrow gauge etrl models run better on OO9/N track, but use OO track so I don't use the narrow gauge locos, I seen a etrl Rusty on N gauge track and it looks brill!!

[DiamondThomas]

Have you seen the movie Thomas and the Magic Railroad?

[leokimvideo]

@DiamondThomas No, I really only know the first 5 season of Thomas, to be honest the latter stuff did not capture my attention.

[super58173]

His name sonds like "Reh-nay-yes"

Interesting fact: Sodor has it's own language, Sudric, so Thomas shouldn't speak english...

[leokimvideo]

@super58173 Thanks

[WHOisHE15]

im in the UK.... and been to lots of model shops and theres nutheing, i did go online i did find some but its in dollers...and i can`t change to uk standers... what shal i do?

[TheSI3DRemakist]

Leo, have you ever thought about giving them actual running chassies? with wheels and rods of course its expensive but it would like and run incredibly

[MrTrainboy1]

so you could make a mould of 1 engine, then make a million copies for "free"

[leokimvideo]

@MrTrainboy1 ah but that is possibly illegal!

[hawkinsquad]

1.take a deep breath

2.think of someone you like

3.press f10 five times

4.send this to five youtube videos

5.look at your background 

[leokimvideo]

@hawkinsquad I did and saw a ghost

[LEON13858]

YOUR AWSOME by the way how can this work on splatter as he has rivets please tell me im very interested to know

[nobloxinroblox]

my train has a star screw

[UltramanCronos]

You should make a tutorial about converting ERTL models to HO track.

[leokimvideo]

@UltramanCronos The problem there is not many of todays tubers have ertl's, they are a bit of a collectors item.

There are lots of similarity between the take along and ertl conversion, I think the ertl is easier as they tend to be longer in length.

[mrduckandBubbles]

Where can a screwdriver with a trianglar head?

[leokimvideo]

@mrduckandBubbles lol, in the video I used something different as I could not find one at home.

Good tool or hardware shops usually have small sets of security screw drivers, there are quite a few different styles of heads.

[pierco5]

I've actually done a few of these.

[ColumbiaAndHoodRiver]

Your narrow gauge locomotive is Named rhenaes, if thats how its spelled

[leokimvideo]

@ColumbiaAndHoodRiver I just did not know how to say it.

[ColumbiaAndHoodRiver]

@leokimvideo oh...

yeah, his name has some, ahem "difficulties" to say his name

[leokimvideo]

@ColumbiaAndHoodRiver Exactly, was not sure how much 'Ass' to put in to the name!

[arandomguy222]

@leokimvideo well tell it like this

re-ne-as

[aals123]

@leokimvideo you dont have to be rood .dont say ass its discusting eeeeeeeeeeeeeehjjjjjjj!

[aals123]

@ColumbiaAndHoodRiver your rite it has got some difficulties to say his name technely its unprounouceable

[donaldengine9]

@leokimvideo: It's pronounced "Ruh-Nay-Us"

[crazyracer12]

@leokimvideo it's pronnounced: Renayus

[trainchugger53]

@leokimvideo Re-nay-as

[gtasandman]

@leokimvideo those that exsist in real life

[legomaker8]

@leokimvideo Rah-na-as

[trainlover658]

@leokimvideo its simple to say rhenaes (just say reh-nay-us)

[Frserthegreenengine]

Cool. You are good at this leo :)

[tdlbr17]

@ColumbiaAndHoodRiver Actually, it's Rheneas, pronounced ren-AY-us.

[theshedrailway]

have u throth about useing metel wheels rhey run even beter i like proter 2000s

[leokimvideo]

@theshedrailway Metal wheels are good, but also quite expensive!

[super58173]

You're going to put narrow gauge engines in your show?

[leokimvideo]

@super58173

Yes, they will play out a part even though they are running the same HO Guage in model form.

[super58173]

@leokimvideo-So, the narrow gauge be looked at as the same size as the normal engines, will they be looked at as smaller? (I take it there's alot of preperation going on).

[leokimvideo]

@super58173 Yes.

[donaldthescotishtwin]

have you got any more open parts?

[HankAmericanEngine]

Hey, if you get the Take-N-Play Hank, may I voice him for you?

[ScottishRails]

Did you put Rheneas on an N scale truck?

[gregjr95]

your experienced All Around

[gregjr95]

That Narrow gauge engine is named rheneas (Ren-nay-es)

[Doopliss96]

so pretty muc, u can make any tkealong or ERTL thomas engine and make it work on those electric engine tracks?

[ScottishRails]

Awesome tutorial!

[turtlesandthomas]

god that sir toham hatt in the first scene must be small

[MrMichaelDogson]

The narrow guage engine is called Rheneas, pronounced rinehyus

[volatilefists]

this is so lame get a real hobby that mite attract females before u die<< lol

[thecreator224]

pronounced ren ay ous

[thecreator224]

the narrow gauge engine was reneas

[baxter22071990]

what ever do you do with the cast off parts

excess ta /ertl wheels etc.?

[leokimvideo]

@baxter22071990

I have given many to tubers who required spare parts.

[baxter22071990]

i see, good idea

thanks for the info leo

[pierco5]

the narrow gauge engine's name is

"Rheneas", pronounced rin-AY-us

[leokimvideo]

Thanks.

[gregjr95]

@pierco5 With all due respect i told him first watch again and Scroll down please

[Sketchy2009Studios]

I love the Mute character!If you can use after effects try to use cgi

[Quike1935]

Can you put Diesel 10 on episode 2?

[trainguy111]

What if I want to do an engine like Fergus or Emily?

[troy5690]

How are the trains propelled along the track, the bogies dont appear to be motorized?

[famaliyof4]

mute's real name is diesel

[MrThomasAndWALLE]

If you are wanting to know what the narrow guage engine's name is. its Rheneas

[leokimvideo]

Thanks, I was not really sure how to say it, I was worried I would make a ass of myself...again!

[MrThomasAndWALLE]

thats ok. :)

[ThomastheE2engine]

hey leo,

where do you get the triangle headed screw drivers from in australia?

eg. bunnings

[leokimvideo]

I think I picked them up at Bunnings Botany, they are security style drivers, there are many different styles of security screws.

I have noticed not all Bunnings carry the same stock, some are serious about tools, others are serious about plants.

Have to say I love to shop there, but get sick of the Chinese crap they tend to push.

[ThomastheE2engine]

thanks i'll have a look after chirstmas when they restock.

[MrTrainboy1]

@leokimvideo are YOU Australian?

[reboot70]

Sorry about my last comment ,I mean like Lady,Thomas,Emily,and Molly.

[leokimvideo]

If I was doing any of these in take along Thomas is possible the easiest, in this video you can see a suggest wheel line up for Thomas.

Emily would be the most difficult with that large wheel, and Molly has a interesting combo of small and large wheels, it would be difficult but not impossible.

Did Lady appear in take along?

Any way Lady would be easy as she only has 2 wheels.

[reboot70]

How do you get the wheels onto the tank engines?

[leokimvideo]

The tank engines are a slightly more complex process. I literally had to treat every one as a custom job.

[princehillanbrand9]

Rheneas is awesome. They made a metallic ERTL version of his model, and I own it.

[Fivestarater]

5 stars 4 u.

Also it would be pretty sweet if you could make a motorized conversion of those types of Thomas trains. Be a bit of a frustrating job I guess.

[leokimvideo]

I keep hearing there are motorized versions, personally I would approach this with a powered wagon via a spud motor, that would make the whole process so much easier.

[CineSteam]

Brilliant as ever, Leo!

And for the pronunciation of Rheneas...

watch?v=CTPuglMtwXw&feature=re­lated

[donaldengine9]

It's pronounced Ra-Nay-us

[SONBoomer]

A little helping information: The narrow gauge engine is called 'Rheneas'...

[sonicxthomasexpert]

Even so he can give him a different name if he wants to because that's what he did with most of the characters. Percy - Noel James - Ted Wilbert - John Ben - Chris Duck - Earl Duck - Alan Edward - Bob Sixteen - Wilson Harold - Helen The Diesel - Andy Diesel - Mute

[SONBoomer]

Oh, I know that.

[leokimvideo]

correct, thanks for sorting this out.

[StanierJack]

Hi Leo,

Just done my own conversion of one of the Thomas die-casts recently, wondering if you've seen it? Follows the same method as your ones, except it's fully motorised.

[tidmouthmilk12]

the narrow gauge ERTL model is called Rhenas (re-nay-ass)

[Sketchy2009Studios]

SO I want to something like that could sned me a bogey website with those exact 2 axeled bogeys u used on diesel 10?

[leokimvideo]

I am wondering if you would like to see a Tomy Thomas conversion, maybe a powered fix..or even the way I would power a Take Along..

[beatletrainfan129]

You should have used the Ertl Diesel in stead because it would look like it was that real model

[leokimvideo]

I did this wheel conversion on a Take Along for this reason..

You can't purchase ERTL's in the shops, I am trying to show a conversion on something everyone can relate to and purchase easily, I hope this explains my reasons here.

[Supermariofan682]

U should have took out the take along magnets and putted Bachmann Couplings

[Cromford88]

The Narrow Gauge Engine is Rheneas.

[leokimvideo]

Thanks, I would have had trouble saying that name..not sure how much ASS to put into the word.

[tonyfan00]

reh-neh-aze

or reh-neh-ess

[MrThomasAndWALLE]

will your Diesel 10 Convertion be in the next Mad Bomber episode? or the next episode after Episode 2 ?

[TurboJUSA]

What about the Hiro HO/OO Wheel Conversion?

[waymuu]

(to turbojusa) you're a retard

[skullbasher115]

i just noticed that he was pulling the train to make it move, on the track, there was no motor in the train

[MrThomasAndWALLE]

oveusly!!!

[524twfguy]

(Reply to skullbasher115) Most of us knwon it already. We have seen on the 'Behind the Secenes' videos.

[TrajikFrikshun]

Awesome work as usual , my Friend... never thought that much work was involved in doin' what you do... kudos....

[skullbasher115]

did u notice towards the end that he was pulling the train an that it was not moving on its own, there was no motor in it

[Sketchy2009Studios]

i think the end of the video where diesel 10 is moving by thomas and lady is a subbliminal message that diesel 10 will be in mad bomber

[CuldeeFellRailway1]

the engine at 1:18 to 1:27 is Rheneas

[GarnerMovies09]

why did you keep the magnet on the train?

overall a good and handy tutorial!

[skullbasher115]

at the end u see a string or wire pulling the train along on the on track, there was no motor in that train

[thomaso9]

look at the episode four little engines

[Sonicthehedgehog765]

Yes!I hope he is in mad bomber

[andersinnevada]

this video will be perfect for the diesel 10 I just bought off of ebay now he will run on ho track!

[thomasfan1993]

the red narrow gauge engine is called ''Rheneas''.

[christhenix]

the one you dont have a name for is rheanas i think thats how you spell it there should be a sticker on the boiler saying his name.

[leokimvideo]

That's what threw me, all my other ERTL narrow gauge engines have their name on the train, I would have hated saying the wrong name in the video, if I am not sure I let those who know more than me get it right.