Added: 2 years ago
From: likess
Views: 20,966
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (58)

Sign In or Sign Up now to post a comment!
  • i have a 05 tundra now after i totalled a 04 taco :( before the taco i had a 93 toyota truck with a 22re. bulletproof motor. top 5 in the world.

  • @rossum3451 they are rank top best motors in the world.

  • how much did you pay for your air filter and where you bought it?

  • @mersenario762 i got this filter from some small auto parts store

  • @mersenario762 i got this for free piping maf and filter

  • The noise of RESTRICTION! That has a much smaller surface area than the correct oversized paper filter, so the holes are bigger. That means bigger bits of dirt in to the engine and it blocks faster. Stick to the paper filter for more power and NO RESTRICTION. Try both on a rolling road and you wouldn't waste your money again!

  • whats the name of your dads shop? i live in LA and i have a 22re, i want to install a turbo but im missing a few parts

  • @beetle269 we dont sell those kind of things but we do sell turbo intercooler kits.. i made this out of left over intercooler piping that was in the stock area..

  • I DONT OWN THIS THIS TRUCK NO MORE.. I HAVE A se-R

  • your truck sucks in more air, and dirt.. just saying. research it. you'll see

  • @slipknoter106 this truck was sold i along time ago.. i got something way better than this hunk of junk

  • @slipknoter106 lol look how cleen it is i dont think that truck ever saw a dirt road

  • @jamtoz i drove it everyday and would wash it almost every other weekend

  • That is phukin awesome! Does the filter cause any kind of malfunctions with any of the sensors? Or, does it make the "check engine" light come on? Thanks!

  • @gordhelmutt84 nothing malfunctions.. the check engine light is on due to someother thing i think it was a sensor idk..

  • lol I wouldn't think you gained 15hp at the time you made the vid, but if you still have the truck, put the intake on the driver's side and the intake on the passenger side. helps alot :)

  • i put a 180 degree pipe on intake and put cone filter on there, so the intake isn't breathing in the hot air next to the header...plus the filter is higher next to the fire wall for water crossings

  • it looks like you kept the bottom of the filter box, is that what the maf and filter are sitting on?

    are you also using 2.5 or 2.75 pipe?

  • LC ENGINEERING IS WHERE YOU ALL NEED TO CHECK OUT! STRICTLY FOR TOYOTAS ONLY.... I DRIVE A 91 AND MY TRUCK SOUNDS A LITTLE MORE MEANER THAN THAT. GOT HEADERS AND INTAKE. NEXT 296 LUNATI CAM AND CARBS!

  • i had one built for my 22re it cost me labor and thats it, they used a 2 1/2 x 4inch plate and a piece of exhaust tube to connect the filter to the mas airflow sensor

  • where did you get the adapter for the mass air flow sensor to fit that filter? I have a 1990 22RE and an after market filter will not fit without that square adapter. any suggestions will help. thanks

  • That's what I need. How much would that cost? Or something similar.

  • @toyotadrummer ehh around 15-25 buxs, for me these parts were free, and i was constantly looking at pics and videos and see how ppl engineered the intake

  • were and how did you get that intake setup ? i want to put the exact cold air intake on mine! yours sounds pretty mighty!! please get back to me as well

  • @skrewFHS just read what i tell ppl.. thats all

  • Ive Ben looking around to get an addapter for the intake filter for that exate air flow censor were can i get it do u know that part number get back at me thanks

  • @Jettrap505  get any 3 inch filter adapter

  • @likess were did tou find the adapter?

  • @yootoobaresellouts well i got it for free but you could find it on ebay

  • gay

  • could I just modify the stock airbox to put on that filter?

  • @wheeler8801 idk about that lol..

  • Dope Ass Truck, I was also going to put an intake on mine but i just ended up putting a performance fillter, breathes so much better....how many speeds does your auto tranny have?

  • @crackstah5150 there 4 gears..

  • sounds so clean

  • @dj025  thanks when i did this it was running perfect

  • Ilovetoyotas just go on eBay and get one I found one for like 1.99

  • @dj1991west dam thats cheap lol

  • is this a 4cyl?

  • @KAHALUUZFiiNEST yeah it's a 4 BANGER lol

  • is there a site I can get that adapter to go from the vain air flow to the cone filter? I would like to get one

  • @Ilovetoyotas just getit form ebay there cheap..

  • what is the difference between an 85to88 cold air intake and an 89 to 95 cold air intake. there is 1 on ebay that im looking at but it only saids 89 to 95. would an 89 to 95 fit on my 86 22re.

  • @1tonyota hmm does the engine bay area look the same ??. cuz if it does more likely you could slap it on.. you make your intake out of intercooler piping man just copy like mines and your done man lol..

  • thanks man.. yeah it was pretty easy to do, but i did have time to do it becuz im always busy, nest step is get a 5 speed tranny, then suspension and next bolt-on's.. yeah i took off the a/c compressor belt so it feels more faster then taking off the power steering, i spank all these heavy ass trucks, silverado's, yukon's,tahoe's,sierra,suburba­n ehh they can never acnt up to me lol.. 22re it's ranked top 10 engines that seem to last forever FTW 22RE <33 !!!!!

  • That intake setup looks nice under the hood! good install, and I bet you can really feel the extra power too.

    Since performance parts are plentiful for the 22RE, I will probably modify mine when I get the money up to the 150-170 hp level. Or I could just buy a 22RET turbo engine with 140 hp and leave it stock! lol

  • @OMGItsWeasel .. uuhh your the one who was talking shit on the "Bye Bye Supra" waht do you want know..

  • youre supposed to connect that vacuum tube that you put a little filter on. good job.

  • EGR tube.

  • @videopoo WHY THE FUCK ARE YOU TALKING SHIT ABOUT MY VID.. NOBODY ASKED FOR YOU TO COMMENT YOU ASSHOLE.. SO STFU AND GET OUT OF HERE YOU FUKN HATER..

  • Comment removed

  • Comment removed

  • Waste of money on a 22re motor

  • thanks but not right now.. still paying some stuff off thanks for hte advice though

  • Look up LC Engineering. A header,cam,and head work make a real big difference in those engines.

  • Clean engine bay, not bad intake install. But I believe the breather is not supposed to be going into the atmosphere. I cant remember what it goes to but I want to say it has to do with your EVAP. A knowledgeable by-the-book SMOG tech will fail you for having it set up that way.

  • @Ill06Taco well thanks and thanks for the adivce, but i could always take it off and put back the o.e.m filter and ect.. thanks man

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more