How I made my colloidal silver 1

[johnh32156]

As long as you are using distilled water I would say you are doing an excellent job! I don't drink mine anymore becuase I started putting it in a little spray bottle and just put a few sprays of it into my mouth under my tongue a couple times a week. I try not to swallow it because I want it to be absorbed into my skin where it will disperse throught my body instead of letting it go right to my stomach.

[STiELzephyr]

it made me feel better :D

[cucumber202]

don't drink it. It's cloudy. you did not use distilled water.

[AnandaRai]

ebay jewellry suppliers

[inachu]

where do you buy the silver wires??!?!?!?!?

I think using grandmas silverware will be just as good. I wonder how long a silver spoon would last in this process.

[lilimo13]

do someone know were i can find 99.999% pur silver or silver wire ? thx

[joselino71]

ebay

[MadCanada597]

why buy the wire? two coins will work too... atleast that way its easier to sell later if you wanted to.

ebay has lost of silver.

[BarryAirdrieFromDaUK]

From Thailand.

[stevesrd]

try ebay

[oscargurses]

purified or distilled water people. rinse out the cup with the purified water. it should be yellow in color not cloudy and foggy. i dont understand why bob beck used tap water, from what ive read, i wouldnt, my tap has fluoride and other chems. its so hard to get the right info regarding this.

[pathtoyhwh]

Sweet!! Thanks for sharing :)

[1freedomfighter11]

one 9 volt for 1 minuets is plenty. Just be sure your silver is pure as possible.

[TheOriginalJoeBloggs]

watch?v=4QObUxP5YQ8

[Sumermagor]

distilled water makes the blood more fluidy, its dangerous,

[theemurf]

Anyone try to make CS and end up with clear water with what looks like iron fillings at the bottom ot the glass? Please help.

[imperialpod]

Try cleaning the silver before placing into the glass, also keep the silver out of direct light.

Make sure you use as pure water as possible, however Beck says just use tap so it could just be dodgy silver. Make sure your silver is as pure as possible....0.999 concentration I think!

[soulvisitor]

From my knowledge

If using DC, 27-30 Volts (ie 3 x 9V not 4) is found to be optium in DC collodial Siver production(Beck)

Distilled water, boiling it is not distilled, Distilled water it made by bringing water to boil, catching the steam and collecting the resultant condensation.

[sddaniel7]

PPM is a meassure of concentration. 20 ppm means 20 parts per million. DI water is better, meaning; deionized.

[commando7144]

your not using distilled water it should always be clear

[HiFiman4u]

Looks like a nice batch of silver chloride to me.Don't drink it.

[oldford71]

they must be 99.9 % pure silver..NOT STERLING or anything else..distil the water 3 times and test it for salt..it must be 0..0..then check the ppm to make sure its 20 or lower..thats the smaller particlas that will flush..understanding ppm is critical..look it up..

[szybkilopez566]

ppm has nothing to do with size, it gives you an idea how many silver particles you got in a milion

[oldford71]

if you have a lower ppm u will have smaller particls.. its not a ratio its a fraction...look it up..

[blajing]

How do you check the PPM?

[imperialpod]

Why did Beck state that he used tap water then, with no mention of pure water!

[1freedomfighter11]

you can use tap water, and one 9 volt battery is plenty, only need to charge the water for about one minuet. technically you cold use the dirtiest water in Mexico because the colloidal silver kills viruses and bacteria in the water, this is how it treats the body as well.

[shopken1]

You get a lot more than you are expecting here and will make toxic tonics. Elements/minerals in the water also react to electrolosis. Such elements as sodium, iorn, boron etc

[1freedomfighter11]

Nt so, even toxic elements broken down with electrolysis will become harmless, of course you want to use clean water though, check out ionised water or Kagen water for its healing affects, all these are just creating ions that are really good for us.

[shopken1]

Better check your chemistry on this one! Electrolysis and creating colloidal (super small particles) solutions can concentrate heavy metals in your body and or fill you with toxic compounds. Even Arsenic that is common in water and that your body needs in small amounts can be dangerous in taken in a highly absorb able form. Sodium water can release chlorine! Nitrates, nitric acid! Sulphur, sulphuric acid. ETC also interesting compounds. (I have checked out the Kagen water a while back)

[1freedomfighter11]

Ok, thanks for the info, i have heard about the chlorine from my work in water fuel cells, but isnt silver like gold in that it can be consumed in small amounts? So I guess what you are saying is do not get carryed away with drinking to much of this stuff?

[shopken1]

Its a lot like the soil and whats available to the plant as I understand it. As an example, elements such as iron may be in the soil, but not available in a form the plant can absorb. If any one element is made absorb-able in excess the plant suffers toxic effects and it blocks the absorption of other vital elements! Healthy soil (organic) releases lots of minerals in colloidal form that the plant collects and the body uses when consumed. Metals can be tough to get out of the body once in there.

[ManFaded]

distilled water...distilled water...distilled water...

[ManFaded]

oh yeah and 99.999% certifiably pure silver

[shopken1]

Even with "distilled water" its no cleaner/purer than the quality of the distillery equipment. Condensation coils and towers can contain alumium oxide salts etc. I am also curious about the effects of different PH levels on electrolysis of silver. I am too far removed from my chemistry lessons...

[ManFaded]

so be clean and live

[samking12]

i think u are right hho cells produce a toxic sluge how can this be difrent

[jellofast]

bc our tap water is fluoridated

[imperialpod]

We can get mineral water for 20p for 2 litres here in lidls so maybe thats the best idea!

[gammabun]

you gonna turn blue!! dont drink it! ahaha joking!

[Tristus1007]

Where can you purchase the silver rods for making your own colloidal silver...stupid question?

[jerome209]

abeland1 (dot) com has some good ones, seems to be fair pricing. just be sure your confident in what your doing. do the research.

[bryishere]

I personally use very low voltage over several hours. (2.50 volts DC in a PINT of Dist. water - .9999 silver rods 3 inches long) All the silver floats down to the bottom and when the white haze almost touches the negative rod I shut it off. Add a three drops of H202 and you have one hell of a mixture...Clear as a bell too. Been using it since the 80's and still the SAME COLOR.....Oh! Imagine that!

[pbotsis]

In October 1996, the FDA proposed to ban the use of colloidal silver or silver salts in over-the-counter products IDIOTS [11]. A Final Rule banning such use was issued on August 17, 1999 and became effective September 16th. The rule applies to any nonprescription colloidal silver or silver salt product claimed to be effective in preventing or treating any disease [12

[mamolb]

have u been sick since ?? do u catch cold? do u know any1 who used it for hiv ?

thank u in advance

[bobbypin57]

do not use injection water, it is not safe, it contains benzyl alcohol, aluminuum and other stuff. Distilled Water is the only liquid to use. there are several ways to increase conductivity, my favorite is sodium bicarbonate (baking soda). the amount use starts at what can be picked up with flat toothpick end--1/4 inch. been making and using it since 1996.

[mungosica79]

Ok the problem is ,that in Dubai I cannot find distiled water strange but true ... Recently i was in Johannesburg and i bought 5l of distilled water in aquarium shop 'cause they didn't have that water in their pharmacies as well, so now I'm making colloid with distilled w. Question: you didn't turn blue since 1996 :) ???

[bobbypin57]

easiest thing to do is get a steam distiller, make your own. no i'm not blue, most of the colloidal silver i make is with 10,000 and 60,000 volts a/c. higher voltage produces smaller particles which do not lodge in skin layer. the lowest voltage i will ever use is 180 volts pulsating d/c.

[mamolb]

u can make distilled water , simply by boiling the water for 3 min

[sploggon]

Only use Purified water or Distilled Water.Check out the Bob Beck Protocol video's on video google :]

[SGDeGalvez]

you should see some milky stuff coming from the positive. After you get that reaction for about 10 minutes stop.  Take a vitamin c caplet, break it in half, scrape a TINY bit of vitamin c one of the halves (enuff to dust the head of a pin) drop the C dust in the silver and stir it with one of your rods. If it turns yellow, your done.

[mungosica79]

I wasn't putting any vitamin C it turned yellow without that... i was using injection water (which supposed to be pure) with a drop of colloidal silver that i bought from a shop, and it turned yellow straight after couple minutes

[SGDeGalvez]

Well, take a look at johnny silverseeds video, if you are rally interested in this. Also, take a look at the blue guy video just for the hazards of using this, or misusing it. I tried it, and it didnt really seem to make a difference. I dunno, everybody is different.

[mungosica79]

well I did my ressearch for about two months ,and i also saw that blue guy...As yoy say everybody is different... Chears,thanx for advice :)