@lolziloveminecraft I have actually built a couple micro sized 4 channel biplanes, but they were built sometime after I made this clipshow so they havent been seen. Once I build a few more projects I'll have enough for a 2nd video.
@RCkid2726 That is a ToonRacer in P-51 markings that i drew up on CorelDraw. All balsa construction, 8.5" span, 7mm SuperSlick motor, GWS 3x2 prop cut down to 2 inches, cheap 2 channel rudder/throttle RX, 0.6 gram actuator for rudder, 145mah lipo, 15 gram AUW. You can probably still find plans for it on RCGroups in the Micro and Indoor forum.
@squigy97 Thanks :) I dont have any video of the formation flyer, I dont really remember what I did with that one, I built it back in '06 so its been a while! There are some other formation flyer planes on youtube I think.
At last, a BUILDER who displays creativity and flair in their pursuit of the hobby. While it can be good for many, buy and fly gets a bit old, after a while. Don't mind me but I get a bit annoyed when some one declares that they "built' A READY TO FLY.
@microbuilder You're welcome. I finally found some 1mm Depron and you've inspired me to get the lead out and build something for the gym. I have in mind an exact scale, Lazy Bee, sized for the Parkzone, Cessna gear. I can shrink the plans down to any size but can you suggest a wingspan?
From there, I hope to follow your lead and get creative.
@FesterBable I agree, most videos have terrible music, which is why the mute button is so wonderful - you can watch the video without the annoying music. Perhaps when you upload your first video you can edit it as you like (then surely someone will post that they either dont like your music, or complain that you didnt put any on...cant please everyone ;) ).
@ninjapicklez69 I believe I used 1/16th for the formers and wings, and 1/32 for skinning the fuselage, but its been a while since I built that. If you go to google and do a search for micro ultimate rcgroups, the first result it brings up should be the micro ultimate thread that I built the plane from, there's a number of plans, drawings, pics and other very useful info there.
@nitroairplane. There are plans available for the micro ultimate at rcgroups.com. Go to the Micro and Indoor forum and search for micro ultimate. It's been built many times by many people and it's quite a plane.
Any tips on repairing that horrible magnet wire that powers the actuator ? I have a Megatech Avion and have made my own balsa wings and tail but have broken the magnet wire for the rudder and can't solder it, it's also enamelled too.
@nitroairplane Yep, thats a F.R.O.G. Pup biplane. If you go to houseoffrog.co.uk you'll find a ton of plans, they all build very quick and easy and fly nice too.
nice stuff, I'm looking to build something new out of a parkzone UM Sukhoi xp... thinking the blastrc pitts.... great inspiration, thanks for the video...
@I used plans, a micro plane called the BLOP (I think...its been a while). I just shrunk them down. Its somewhere in the Micro & Indoor or Micro RTF forum at RCGroups(dot)com.
3:08 is that a xtwin receiver with a magnetic actuator mod ? truly amazing amount of different things you have tried :) what would you say really worked well for xtwin radio , im guessing 1.02 flew well
@jinxym The one at 3:08 was actually controlled with a JMP combo RX, I think the only picture I ever took of one of the planes I used the actuator mod on was one of the balsa Stryker F-27s, and it didnt have the mod done to it yet when the pic was taken. Figures. The glider flew great, it would get small awfully fast and really didnt like to come down!
so here i am the proud owner of 2 xtwin biplanes , 1 for as is flying and the other for my own builds , just wanted to say that some of your designs are brilliant ! you just cant beat buying a cheap toy then stripping it for the radio lol regards a fellow table tinkerer
@stephenfrazer1 I just used foam dinner plates or meat packing trays. Used a plastic grocery back for the skirt, AirHogs AeroAce electronics for thrust and steering, and a 7mm motor with its own lipo for lift.
@Randomshit1353 Thats a Micro Ultimate, plans are available online. Do a search on google for micro ultimate rcgroups, the first link should be for the page that has all the info on it. Its a pretty good plane.
Wow! I am currently just getting into the RC hobby with 1 (soon to be 2) planes.
This video was incredible and showed me a new side of the hobby that was quite inspiring! =) I would love to create micros but wouldn't know where to start as far as micro parts go (very micro!!) and the construction proccess. As sk8foreverk suggested, it would be awesome if you could make some sort of tutorial or 5 minute walkthrough of the general process as you make one of your micro models
@electricviolinpownz Thanks! check out rcgroups com, litterally everything I learned about micro RC was learned from their Micro and Indoor forum, the Micro RTF forum is quite handy too. Its a fun side of the hobby, ParkZone has made it more accessable (and cheaper!), but nothing beats a scratch buit!
@LEDking1 That plane used a magnetic actuator rather than a normal servo for the rudder. I used the guts from a WattAge MicroFlyer for that plane, which was one of the very first planes I ever built
@RCMaster220 These days, Parkzone gear is a good way to go, you can get pretty much everything from them from a lot of differant websites. bsdmicrorc com is a good place too for other micro gear.
nothing better than buying a cheap little rc or infrared plane then stripping it down to its electronics :) cheap fun + you can make as many kinds of plane your fingers can cope with lol, like them all regards a fellow micro builder
@rambo45889 Thanks, thats a F.R.O.G. Pup bipe, you can find free plans online for the plane if you do a search for it on Google. Its a pretty simple plane to build and flys well.
@AuroraCypher Thanks! Yes todays electronics are quite convenient, back just 5 years ago the electronics side of things made the hobby even more of a challenge, now its almost too easy!
@ramicaza Thanks, that one did turn out looking kinda cool. I had built it too small though, if it had flown, it would've been fast! It would be worth trying again.
Microbuilder you truly have extreme talent. I'd love one of those just to watch fly. I build bigger foamies for 3D but Then never look nice. I like your style and builds. Its amazing.
If you go to RCGroups(dot)com, and do a search for Micro Ultimate, you'll find a thread with the plans and several builds. I cant remember the wingspan off the top of my head, but it was around 12 inches I think.
Thanks!! I didnt really know how to build anything when I first started, but I learned. Check out RCGroups(dot)com, they have an Indoor and Micro forum, its pretty much where I learned everything.
Hi again, tanks for the quick reply. i did some digging around my old "rc model world" magazines and took a peek at the light flight section i never used to read since I'm also into nitro power, and i found some good suppliers closer to home in the ads. Now I'm thinking of buying Futaba's r6004ff receiver, weighing in at 3.3g without the plastic case. Is this adequate for something like your micro ultimate? Please help since i can't find anyone who's into models like this in Malta.
3.3g might be a bit much for just the RX, but it depends on what other gear you would use. You can always scale the plan up a bit if the weight gets too high.
Poorly, unfortunately. A mix of bad thrust line and incidence angle caused it to slowly lose altitude. I think I have a video of it in my uploaded videos.
man you are AWESOMEEEEE !!!!! now i am you fan :D these planes are just PERFECT i am too rc micro plane builder i am just 12 yers old but these planes are yay i want one of these i want 0:55 sec cai i buy it plzzzzzzzzzzz ?
Thanks! The P-38 at :55 seconds no longer exists, so I couldnt sell it. It was a good flyer though, and the P-38 is one of the great classics. Keep building and flying!
wow... i'm not a fan of all the styles of planes you built but i definately have to say that you can build small airplanes better than anyone i've ever seen.. i have seen some of those planes on RCGroups i'm pretty sure. Awesome builder!
Thank you! If you think I'm good, do a search for rguillot, NitroCharged, or Joe Malinchak (to name just a few) on RCGroups to see folks who can outbuild me with their eyes closed :D
wow i try to be like u onli problem i run out of balso wood.. i dont no were to get good ideas and my mum goes though my room weekly and get rid of all my electronics :(.... also i rekon u should recored some of these planes... and i loved some of the look nice work!
Thanks! Try foam dinner plates instead of balsa, a stack of plates in your room might look a little less conspicuous than a sheet of balsa...or maybe not ;)
Yep, I think only one of the of P-38s I've built didnt fly (that one never got pictures taken of it, so it wasnt in the clipshow). Its a great micro plane to build with AeroAce or ParkZone electronics.
Thank you for the great advice I want to try to build one do you go to like the hardware store for the balsa and the internet for the electronics. One other question do you have videos of you flying theme? Not just the p-38 but all of theme.
Hi microbuider could you please tell me what material you used to make the model at 3:48 please it would be help full because i am looking it to making my own rc planes.
Hi. The material for the plane at 3:48 is a type of foam thats used for potting fake plants. It works great for carving out shapes, but its very fragile and not exactly light weight. Might work if you keep the plane small and light, but I wouldnt suggest it for anything over an ounce. Good luck!
Please tell me you didn't actually build all these planes! Man, that's incredible! Do you have a team of robotic assembly machines working for you? Or maybe a couple of teenage sons? How is it possible to put out that much cool stuff in such a short span of time? And colored/painted, as well! You've gotta be using computer-controlled androids or something.
Micro RC is like a crack addiction, or perhaps like Pringles chips...once you start, you cant stop. No androids or teenage sons here, just a heavy fascination for a great hobby. Thanks for the kind words!
Thank you. Only a couple of the planes were my own designs, the rest were all done with 3 view drawings I pulled off the internet or at RCGroups - without RCG, I'd still have no idea what I was doing.
do try to sell some!
philip2213zz 3 hours ago
do try to sell some!
philip2213zz 3 hours ago
why not make tiny 4ch bi-plane? xD That's my challenge for you, microbilder!
lolziloveminecraft 1 month ago
@lolziloveminecraft I have actually built a couple micro sized 4 channel biplanes, but they were built sometime after I made this clipshow so they havent been seen. Once I build a few more projects I'll have enough for a 2nd video.
microbuilder 3 weeks ago
@microbuilder colud you send me a info about the plane on 2:04 pls?
RCkid2726 2 months ago
@RCkid2726 That is a ToonRacer in P-51 markings that i drew up on CorelDraw. All balsa construction, 8.5" span, 7mm SuperSlick motor, GWS 3x2 prop cut down to 2 inches, cheap 2 channel rudder/throttle RX, 0.6 gram actuator for rudder, 145mah lipo, 15 gram AUW. You can probably still find plans for it on RCGroups in the Micro and Indoor forum.
microbuilder 1 month ago
@microbuilder oh, one more thing, could you make a video of that formation plane flying? (I won't mind any music! ;) )
squigy97 2 months ago
@squigy97 Thanks :) I dont have any video of the formation flyer, I dont really remember what I did with that one, I built it back in '06 so its been a while! There are some other formation flyer planes on youtube I think.
microbuilder 2 months ago
I think the one with the three jets in formation was pretty cool. Great job!
squigy97 2 months ago
At last, a BUILDER who displays creativity and flair in their pursuit of the hobby. While it can be good for many, buy and fly gets a bit old, after a while. Don't mind me but I get a bit annoyed when some one declares that they "built' A READY TO FLY.
Thanks for the inspiration.
I like the music too.
hopeso 2 months ago
@hopeso Thank you!
microbuilder 2 months ago
@microbuilder You're welcome. I finally found some 1mm Depron and you've inspired me to get the lead out and build something for the gym. I have in mind an exact scale, Lazy Bee, sized for the Parkzone, Cessna gear. I can shrink the plans down to any size but can you suggest a wingspan?
From there, I hope to follow your lead and get creative.
hopeso 1 month ago
How did u make the one at 1:42?!?
ozvooky 3 months ago
@ozvooky I used a foam called Durobatics to make that one. Its a great product, but unfortunately, the its kinda spendy and hard to find.
microbuilder 3 months ago
@kre8tinfx Thanks, it seemed fitting.
microbuilder 3 months ago
Where is the version without audio? I would rather watch that.
FesterBable 4 months ago
@FesterBable Hit mute ;)
microbuilder 3 months ago
@microbuilder No. I am not watching videos with annoying background music. People should stop editing that crap into them.
FesterBable 3 months ago
@FesterBable I agree, most videos have terrible music, which is why the mute button is so wonderful - you can watch the video without the annoying music. Perhaps when you upload your first video you can edit it as you like (then surely someone will post that they either dont like your music, or complain that you didnt put any on...cant please everyone ;) ).
microbuilder 3 months ago
what kind of balsa do you use for the micro ultimate and do you have a pdf of it or something because i really want to make it
ninjapicklez69 4 months ago
@ninjapicklez69 I believe I used 1/16th for the formers and wings, and 1/32 for skinning the fuselage, but its been a while since I built that. If you go to google and do a search for micro ultimate rcgroups, the first result it brings up should be the micro ultimate thread that I built the plane from, there's a number of plans, drawings, pics and other very useful info there.
microbuilder 4 months ago
Cool ! Did all of them fly?!
redzir1 5 months ago
@redzir1 A handful didnt, but the rest did.
microbuilder 5 months ago
@jackapac1999 Thanks, that one was a nightmare to trim!
microbuilder 5 months ago
U got talent!
fireblade4727 6 months ago
@fireblade4727 Thanks!
microbuilder 6 months ago
Wow! Some r really cool!!
fireblade4727 6 months ago
can anyone tell me the name of the plane at 0:55 please?
CrosseyedEpicFace 6 months ago in playlist ALL FAVORITES
@CrosseyedEpicFace P-38 Lightning
microbuilder 6 months ago
@nitroairplane. There are plans available for the micro ultimate at rcgroups.com. Go to the Micro and Indoor forum and search for micro ultimate. It's been built many times by many people and it's quite a plane.
microbuilder 7 months ago
do you have plans for the ultimate micro?
nitroairplane 7 months ago
Any tips on repairing that horrible magnet wire that powers the actuator ? I have a Megatech Avion and have made my own balsa wings and tail but have broken the magnet wire for the rudder and can't solder it, it's also enamelled too.
Joefullager 7 months ago
can i have that small f-22 raptor plzzzzzzzzzz
beast10165 8 months ago
@beast10165 I dont recall building a Raptor...what time does it show up in the video?
microbuilder 8 months ago
@655JT Thank you!
microbuilder 9 months ago
at 3:27 do you have plans for that micro biplane that you are holding in your hand
nitroairplane 9 months ago
@nitroairplane Yep, thats a F.R.O.G. Pup biplane. If you go to houseoffrog.co.uk you'll find a ton of plans, they all build very quick and easy and fly nice too.
microbuilder 9 months ago
Hey, Your having way to much fun with those cute little planes :) very nice builds, Take care and have fun, Chellie
CHELLIE2408 10 months ago
@CHELLIE2408 Thanks!
microbuilder 9 months ago
nice stuff, I'm looking to build something new out of a parkzone UM Sukhoi xp... thinking the blastrc pitts.... great inspiration, thanks for the video...
axelsfolks 11 months ago
@axelsfolks Go for it!!
microbuilder 9 months ago
@axelsfolks Go for it!!
microbuilder 9 months ago
the one at 1:44 did u just make it or did u have plans?
iimafa 11 months ago
@I used plans, a micro plane called the BLOP (I think...its been a while). I just shrunk them down. Its somewhere in the Micro & Indoor or Micro RTF forum at RCGroups(dot)com.
microbuilder 11 months ago
@655JT Thanks!
microbuilder 11 months ago
3:08 is that a xtwin receiver with a magnetic actuator mod ? truly amazing amount of different things you have tried :) what would you say really worked well for xtwin radio , im guessing 1.02 flew well
jinxym 1 year ago
@jinxym The one at 3:08 was actually controlled with a JMP combo RX, I think the only picture I ever took of one of the planes I used the actuator mod on was one of the balsa Stryker F-27s, and it didnt have the mod done to it yet when the pic was taken. Figures. The glider flew great, it would get small awfully fast and really didnt like to come down!
microbuilder 1 year ago
so here i am the proud owner of 2 xtwin biplanes , 1 for as is flying and the other for my own builds , just wanted to say that some of your designs are brilliant ! you just cant beat buying a cheap toy then stripping it for the radio lol regards a fellow table tinkerer
jinxym 1 year ago
@jinxym Thanks you! And I agree, the bang for the buck factor is hard to replicate with cheap simple gear and homebuilt flying things.
microbuilder 1 year ago
i was wondering how to build the plane at 0:55
stephenfrazer1 1 year ago
@stephenfrazer1 I just used foam dinner plates or meat packing trays. Used a plastic grocery back for the skirt, AirHogs AeroAce electronics for thrust and steering, and a 7mm motor with its own lipo for lift.
microbuilder 11 months ago
i was wondering how to build the plane at 0:55
stephenfrazer1 1 year ago
wat foam did u use on the micro ultimate biplane
LILKillazone96 1 year ago
@LILKillazone96 Its a product called CellFoam 88, by Midwest Products. Its 3mm thick (comes in other sizes), very similar to depron foam.
microbuilder 1 year ago
do they alllllll fly ?
killerbeenl 1 year ago
@killerbeenl No, there were handfull that just refused to fly...some are just stubborn that way.
microbuilder 1 year ago
awesome planes, very good job...
WarbirdFan66 1 year ago
@WarbirdFan66 Thanks!
microbuilder 1 year ago
im doing this plane 0:48
michaelda94 1 year ago
@michaelda94 The P-38 is perfect for the AirHogs gear, I built quite a few of them and all but one flew great
microbuilder 1 year ago
Loved your slide show!
Keep it UP
makikiverde 1 year ago
@makikiverde Thank you!
microbuilder 1 year ago
what equipment did u use? plantraco?
Blinkerman909 1 year ago
@Blinkerman909 A lot of the gear was AeroAce electronics and other cheap RTF plane guts, otherwise I used a 72mhz JMP RX or Spektrum RX.
microbuilder 1 year ago
F. nice man yeaa
seppekhu 1 year ago
@seppekhu Thanks!
microbuilder 1 year ago
can you send one to my house?
Shiroblack 1 year ago
whats the plane @ 2:10
Randomshit1353 1 year ago
@Randomshit1353 Thats a Micro Ultimate, plans are available online. Do a search on google for micro ultimate rcgroups, the first link should be for the page that has all the info on it. Its a pretty good plane.
microbuilder 1 year ago
@microbuilder cool but can it be made from plastic and not foam i hate foamies!
Randomshit1353 1 year ago
@Randomshit1353 It would have to be a very thin and lightweight plastic to keep the weight down, but that should work. Balsa works great too.
microbuilder 1 year ago
@ 3:00 = the largest plane you've made
Randomshit1353 1 year ago
@Randomshit1353 I've actually built a 6 foot span plane before, that little bipe was only 6 inches, building small is harder I think...
microbuilder 1 year ago
Wow! I am currently just getting into the RC hobby with 1 (soon to be 2) planes.
This video was incredible and showed me a new side of the hobby that was quite inspiring! =) I would love to create micros but wouldn't know where to start as far as micro parts go (very micro!!) and the construction proccess. As sk8foreverk suggested, it would be awesome if you could make some sort of tutorial or 5 minute walkthrough of the general process as you make one of your micro models
Thank you greatly!
electricviolinpownz 1 year ago
@electricviolinpownz Thanks! check out rcgroups com, litterally everything I learned about micro RC was learned from their Micro and Indoor forum, the Micro RTF forum is quite handy too. Its a fun side of the hobby, ParkZone has made it more accessable (and cheaper!), but nothing beats a scratch buit!
microbuilder 1 year ago
please make a tutorial
sk8foreverk 1 year ago
@sk8foreverk I havent built much lately, but if I do I'll try to remember to take pictures of the process and post it.
microbuilder 1 year ago
from parkzone ultra micros
tatianatiana 1 year ago
How did you make the servo on the plane at 0:06 ??
LEDking1 1 year ago
@LEDking1 That plane used a magnetic actuator rather than a normal servo for the rudder. I used the guts from a WattAge MicroFlyer for that plane, which was one of the very first planes I ever built
microbuilder 1 year ago
what are some good websites to buy parts?
RCMaster220 1 year ago
@RCMaster220 These days, Parkzone gear is a good way to go, you can get pretty much everything from them from a lot of differant websites. bsdmicrorc com is a good place too for other micro gear.
microbuilder 1 year ago
where did u find such a small electronic prop?
baeronautics 1 year ago
@baeronautics you can get small props from a number of online vendors, like bsdmicrorc(dot)com.
microbuilder 1 year ago
nothing better than buying a cheap little rc or infrared plane then stripping it down to its electronics :) cheap fun + you can make as many kinds of plane your fingers can cope with lol, like them all regards a fellow micro builder
jinxym 1 year ago
@jinxym thanks!
microbuilder 1 year ago
I like the flying cube concept, just somthing one would not expect to see flying around in the air.
nice work!
peace
porousorifice 1 year ago
@porousorifice Thanks, the flying Fender Champ has been one of my favorites, a Borg cube would be cool too.
microbuilder 1 year ago
i like the orange and white bi plane at 3:27
rambo45889 1 year ago
@rambo45889 Thanks, thats a F.R.O.G. Pup bipe, you can find free plans online for the plane if you do a search for it on Google. Its a pretty simple plane to build and flys well.
microbuilder 1 year ago
Wow! thats a lot of planes, im well impressed. Looks like you had a lot of fun and time on your hands. One can only assume you dont have kids.
jhunt6969 1 year ago
@jhunt6969 Nope no kids! Thanks :)
microbuilder 1 year ago
your micro planes are amazing i love how some of the plane u design it on your own .. very creative and good work thanks for sharing with us !
u must love today technology of micro electronics then because its smaller lighter and powerful in term of rang and long lasting.
AuroraCypher 1 year ago
@AuroraCypher Thanks! Yes todays electronics are quite convenient, back just 5 years ago the electronics side of things made the hobby even more of a challenge, now its almost too easy!
microbuilder 1 year ago
impresionante es lo que yo siempre he querido hacer quiero que me enseñes
y esos motores pequeños los quiero conseguir
tlondo1123 1 year ago
you have too much time on your hands dude! lol nice planes
jordanmtoth 1 year ago
@jordanmtoth Thanks!
microbuilder 1 year ago
I like the planes in formation plane
ramicaza 1 year ago
@ramicaza Thanks, that one did turn out looking kinda cool. I had built it too small though, if it had flown, it would've been fast! It would be worth trying again.
microbuilder 1 year ago
Microbuilder you truly have extreme talent. I'd love one of those just to watch fly. I build bigger foamies for 3D but Then never look nice. I like your style and builds. Its amazing.
smeelokilo 1 year ago
@smeelokilo Thank you, I cant fly 3D worth a darn, but building big is a lot easier than building small!
microbuilder 1 year ago
very good. I am french and I like all the planes fly. I go see Rc groups...Thank you for all photos...Tchaoo
BOBMACFLI 1 year ago
i like you planes and helicopter
Javimatos69PLUS1 1 year ago
@Javimatos69PLUS1
Thank you!
microbuilder 1 year ago
Do you have plans for the micro ultimate bipe at 2:10. Also, what's the wingspan of it and what's It made of
sushifish90210 2 years ago
If you go to RCGroups(dot)com, and do a search for Micro Ultimate, you'll find a thread with the plans and several builds. I cant remember the wingspan off the top of my head, but it was around 12 inches I think.
microbuilder 2 years ago
???what's the title of the song?. :) btw nice vid!!
youngbloodzph 2 years ago
Thanks! The song is called Soar, by Ben Arnold, the album is Almost Speechless (if you like acoustic stuff, his Solo CD is excellent).
microbuilder 2 years ago
dude, best video ive probaly ever seen. and it wasnt even a video!!!! all that in only 4.5years! dude, your my idol!!! i would love to do that.
kanimate 2 years ago
Thanks!! I didnt really know how to build anything when I first started, but I learned. Check out RCGroups(dot)com, they have an Indoor and Micro forum, its pretty much where I learned everything.
microbuilder 2 years ago
hiya. might you please tell me of a company who supplies motors, actuators, servos, and receivers other then plantraco and parkzone? thanks
MalliaCamilleri 2 years ago
Hi, I would try bsdmicrorc(dot)com. They've been around a long time and I've done business with them several times, they're a great micro RC vendor.
microbuilder 2 years ago
Hi again, tanks for the quick reply. i did some digging around my old "rc model world" magazines and took a peek at the light flight section i never used to read since I'm also into nitro power, and i found some good suppliers closer to home in the ads. Now I'm thinking of buying Futaba's r6004ff receiver, weighing in at 3.3g without the plastic case. Is this adequate for something like your micro ultimate? Please help since i can't find anyone who's into models like this in Malta.
MalliaCamilleri 2 years ago
3.3g might be a bit much for just the RX, but it depends on what other gear you would use. You can always scale the plan up a bit if the weight gets too high.
microbuilder 2 years ago
how did the witch fly?
Nile505 2 years ago
Poorly, unfortunately. A mix of bad thrust line and incidence angle caused it to slowly lose altitude. I think I have a video of it in my uploaded videos.
microbuilder 2 years ago
AWESOME
RESPECT!!!!
MrShockyboy 2 years ago
Thank you :)
microbuilder 2 years ago
all were awsome
rockyFLYR 2 years ago
Thanks!
microbuilder 2 years ago
yes i keep build a rc micro planes hey where did you get parts from some x twin planes ?
Knipa13 2 years ago
Yep, a lot of my planes have been powered by X-Twins/AeroAce guts, hard to beat them for their simplicity and cheap price.
microbuilder 2 years ago
man you are AWESOMEEEEE !!!!! now i am you fan :D these planes are just PERFECT i am too rc micro plane builder i am just 12 yers old but these planes are yay i want one of these i want 0:55 sec cai i buy it plzzzzzzzzzzz ?
Knipa13 2 years ago
Thanks! The P-38 at :55 seconds no longer exists, so I couldnt sell it. It was a good flyer though, and the P-38 is one of the great classics. Keep building and flying!
microbuilder 2 years ago
sorry i posted b/f i looked, anyways your shit is HOT !! good for you man ,i would love to see some of them fly
rustybolt420 2 years ago
Thanks!
microbuilder 2 years ago
what do you use for your r/c gear?
rustybolt420 2 years ago
great work man, your pretty darn good at fiddly shiz!
AussieJarred 2 years ago
Thanks, smaller fingers (and better eyes) sure would make things a lot easier though.
microbuilder 2 years ago
wow... i'm not a fan of all the styles of planes you built but i definately have to say that you can build small airplanes better than anyone i've ever seen.. i have seen some of those planes on RCGroups i'm pretty sure. Awesome builder!
beasycuz 2 years ago
Thank you! If you think I'm good, do a search for rguillot, NitroCharged, or Joe Malinchak (to name just a few) on RCGroups to see folks who can outbuild me with their eyes closed :D
microbuilder 2 years ago
wow i try to be like u onli problem i run out of balso wood.. i dont no were to get good ideas and my mum goes though my room weekly and get rid of all my electronics :(.... also i rekon u should recored some of these planes... and i loved some of the look nice work!
REECE780 2 years ago
Thanks! Try foam dinner plates instead of balsa, a stack of plates in your room might look a little less conspicuous than a sheet of balsa...or maybe not ;)
microbuilder 2 years ago
Did the one that looked like the P-38 fly?
stupidvideoalert4 2 years ago
Yep, I think only one of the of P-38s I've built didnt fly (that one never got pictures taken of it, so it wasnt in the clipshow). Its a great micro plane to build with AeroAce or ParkZone electronics.
microbuilder 2 years ago
Thank you for the great advice I want to try to build one do you go to like the hardware store for the balsa and the internet for the electronics. One other question do you have videos of you flying theme? Not just the p-38 but all of theme.
stupidvideoalert4 2 years ago
Sorry for the late reply here. I have one or two videos of two differant P-38s, but the quality is so poor I never bothered posting them.
microbuilder 2 years ago
me encantan tu avioens ene special los DLG
havichin 2 years ago
gracias!
microbuilder 2 years ago
those are sweet do they all fly?
stupidvideoalert4 2 years ago
Thanks. Not all of them flew, but the majority of them did.
microbuilder 2 years ago
Very nice works!!!!
joatompat 2 years ago
Hi microbuider could you please tell me what material you used to make the model at 3:48 please it would be help full because i am looking it to making my own rc planes.
aboogie123456 2 years ago
Hi. The material for the plane at 3:48 is a type of foam thats used for potting fake plants. It works great for carving out shapes, but its very fragile and not exactly light weight. Might work if you keep the plane small and light, but I wouldnt suggest it for anything over an ounce. Good luck!
microbuilder 2 years ago
Sweet/ nice/ what song is this?
jtdozsk8 2 years ago
Thanks! The song is called Soar, by a very unknown band called Ben Arnold.
microbuilder 2 years ago
the pitts is amazing
skateer25 2 years ago
some of those designs are AMAZING
rckidcam1994 2 years ago
Thanks!
microbuilder 2 years ago
Please tell me you didn't actually build all these planes! Man, that's incredible! Do you have a team of robotic assembly machines working for you? Or maybe a couple of teenage sons? How is it possible to put out that much cool stuff in such a short span of time? And colored/painted, as well! You've gotta be using computer-controlled androids or something.
SomeUselessGeek 2 years ago
Micro RC is like a crack addiction, or perhaps like Pringles chips...once you start, you cant stop. No androids or teenage sons here, just a heavy fascination for a great hobby. Thanks for the kind words!
microbuilder 2 years ago
Ecxactly! :D
Just how it is supposed to be! :)
Really nice video Your designes are just wonderfull :)
greets william ^^
nerdboy19 2 years ago
Thank you. Only a couple of the planes were my own designs, the rest were all done with 3 view drawings I pulled off the internet or at RCGroups - without RCG, I'd still have no idea what I was doing.
microbuilder 2 years ago
No problem, and yes, RCGroups - couldnt live without it! xD
nerdboy19 2 years ago