The heads and intake manifolds on the LS1 are already very free flowing, the bottleneck is the cam so a cam makes a big difference. I just put GT40P heads and GT40 upper and lower intake on my '92 Mustang that already had shorties and full exhaust. It picked up power with the H/I swap for sure, but it noses over right after 5k because of the stock cam. Now I am in a LS1 situation where a cam will totally wake up the engine.
@gtdrummerdude Lol this isn't the same as an old 5.0, can't even compare. Stock LS1s don't run out of juice before stock redline like 5.0s do, they make power straight to redline with no issues. The heads and intake I have on my car are the worst flowing stock LS1 parts out there, the cam on the other hand, made power to 7000 rpm, only dropping 3 whp from 6500-7000 rpm. Rev limiter is set to 6500 because I'm scared of breaking the stock bottom end lol.
@gtdrummerdude It is a big cam, over .600 lift and they flow light years better than old SBC shit but as far as LS stuff goes, it's scraping the bottom of the barrel.
@KFCOrBust Well at some point you gotta be happy with the way it is. There's always someone faster and your own car can always be faster with more money. 115 mph is more than fast enough for a daily. My old '82 notch went 118 mph with a 9:1 302 and it was my daily. I remember it being a little much around town.
@gtdrummerdude Oh no dude, it's definitely fun as fuck! Just saying, with a few dollars in heads and a new intake I could be having even more fun! lol It's not too much around town, the 4:10s actually give me more leeway on gear selection since it's harder to keep it bogged down, my first change come spring time is getting rid of the SLP catback and going stock + cutout, I attract WAY too much attention and I can't even warm up my car before I go to work since I leave at 5am.
pssht....my cammed ws6 is already ahead of the boss 302. for way less. and looks better. may not be as nice in some ways, but it gets the job done over and over and over again time after time.
The heads and intake manifolds on the LS1 are already very free flowing, the bottleneck is the cam so a cam makes a big difference. I just put GT40P heads and GT40 upper and lower intake on my '92 Mustang that already had shorties and full exhaust. It picked up power with the H/I swap for sure, but it noses over right after 5k because of the stock cam. Now I am in a LS1 situation where a cam will totally wake up the engine.
gtdrummerdude 4 weeks ago
@gtdrummerdude Lol this isn't the same as an old 5.0, can't even compare. Stock LS1s don't run out of juice before stock redline like 5.0s do, they make power straight to redline with no issues. The heads and intake I have on my car are the worst flowing stock LS1 parts out there, the cam on the other hand, made power to 7000 rpm, only dropping 3 whp from 6500-7000 rpm. Rev limiter is set to 6500 because I'm scared of breaking the stock bottom end lol.
KFCOrBust 4 weeks ago
@KFCOrBust Sounds like a big cam. Stock LS1 heads and intake flow a lot. They may be crappy to you, but they are miles ahead of an old 350 head.
gtdrummerdude 4 weeks ago
@gtdrummerdude It is a big cam, over .600 lift and they flow light years better than old SBC shit but as far as LS stuff goes, it's scraping the bottom of the barrel.
KFCOrBust 4 weeks ago
@KFCOrBust Well at some point you gotta be happy with the way it is. There's always someone faster and your own car can always be faster with more money. 115 mph is more than fast enough for a daily. My old '82 notch went 118 mph with a 9:1 302 and it was my daily. I remember it being a little much around town.
gtdrummerdude 3 weeks ago
@gtdrummerdude Oh no dude, it's definitely fun as fuck! Just saying, with a few dollars in heads and a new intake I could be having even more fun! lol It's not too much around town, the 4:10s actually give me more leeway on gear selection since it's harder to keep it bogged down, my first change come spring time is getting rid of the SLP catback and going stock + cutout, I attract WAY too much attention and I can't even warm up my car before I go to work since I leave at 5am.
KFCOrBust 3 weeks ago
Beating fords it lost
SHTINONCHEVY 1 month ago
Gotta love the LSx's and f-bodys. Cam only and less then half the cost and its still beatin Fords
steelcityracer1320 1 month ago
@Black93camaro....u accidently put an s where a T should be
sradman750 3 months ago
ha, only a cam and running 12's?
Vaicurious 5 months ago
@Vaicurious Should be 11s but stock suspension, doo doo tranny and 255 radials FTL! lol
KFCOrBust 5 months ago
@Vaicurious he would be in 11's easy if hed get some 275 drag radials. even on stock suspension. ls1 is an undeniable beast.
kief4diamonds 3 months ago
pssht....my cammed ws6 is already ahead of the boss 302. for way less. and looks better. may not be as nice in some ways, but it gets the job done over and over and over again time after time.
kief4diamonds 5 months ago
Comment removed
black93z28camaro 3 months ago
This has been flagged as spam show
@kief4diamonds Shut up ls1's suck ;)
black93z28camaro 3 months ago