awsome yet another video of a car going vvvvrrrrooooom on a dyno with no result numbers!!!!!!...LOL....Just razzing you because i'm curious as to what it put down.
@graemepetteway He has fuel injection on it. Thats what the FAST system is for. It's a stand alone computer so you can completely control your tune with a lap top and not have to pay someone to tune it for you. Or keep burning a chip if you have that capability.
where did u get your turbo manifolds if u dont mind me asking cause i have a turbo 289 bored but cant find any manifolds that will work for my garret turbo
how in the hell is ur block not splitting,, i got forged pistons in my 91 lx with built top end and im scared shitless to take it over 450hp... tell me somthin good please ha
DougEFesh25: I have 150,000 miles on my bone stock 92 block and I have a 62mm turbo making 445 rear wheel horses and 538lb/ft of torque on 10lbs. No issues with mine yet so don't be afraid! Some just last longer than others. The general rule of thumb for the stock block is around 500 horses is all it can take. Mine obviously is doing okay with over 500 flywheel horses and tons of miles.
I'm running 13 psi on my stock block, I have tried to break it and it's still ticking. We put one together and ran 20# and a 150 shot, lasted 42 passes.
This used to be a nitrous car. It has a set of AFR's, edelbrock Super victor intake and a Comp nitrous cam. The shortblock itself is completely stock from a 92 LX.
We are currently switching it over to a built 393 ci windsor and a FAST system. Hope to have some new numbers before the end of the season.
awsome yet another video of a car going vvvvrrrrooooom on a dyno with no result numbers!!!!!!...LOL....Just razzing you because i'm curious as to what it put down.
Charcoal300zxTT 7 months ago
so how much does it cost to convert carb to fuel inj?
Tj1056 1 year ago
WHat carb you got?
graemepetteway 1 year ago
@graemepetteway He has fuel injection on it. Thats what the FAST system is for. It's a stand alone computer so you can completely control your tune with a lap top and not have to pay someone to tune it for you. Or keep burning a chip if you have that capability.
72Horton 1 year ago
What were the numbers?
Mitch03pb 1 year ago
where did u get your turbo manifolds if u dont mind me asking cause i have a turbo 289 bored but cant find any manifolds that will work for my garret turbo
Kevinandkay2 2 years ago
yo dog how do you have your exhaust set up
MaddMuffins 2 years ago
how in the hell is ur block not splitting,, i got forged pistons in my 91 lx with built top end and im scared shitless to take it over 450hp... tell me somthin good please ha
DougEFesh25 2 years ago
DougEFesh25: I have 150,000 miles on my bone stock 92 block and I have a 62mm turbo making 445 rear wheel horses and 538lb/ft of torque on 10lbs. No issues with mine yet so don't be afraid! Some just last longer than others. The general rule of thumb for the stock block is around 500 horses is all it can take. Mine obviously is doing okay with over 500 flywheel horses and tons of miles.
Stickman53fe 2 years ago
@Stickman53fe nice that is somethin good.. ya im thinking about puting 61 trim turbonetics on it. not sure though think im going to get rid of it
DougEFesh25 1 year ago
@DougEFesh25 Slap that thing on it and run!
Stickman53fe 1 year ago
@Stickman53fe: Are you serious. thats incredible how often do you wind it up and how long as the turbo been on the car???
BigBoyd06 1 year ago
I'm running 13 psi on my stock block, I have tried to break it and it's still ticking. We put one together and ran 20# and a 150 shot, lasted 42 passes.
aw73853 2 years ago
damn!!!!!!!!!!!!!!!!!!!!!!!!!!!!! sick!
nukebutcher 2 years ago
how stock is the hole motor ?
jeffcougar1968 2 years ago
This used to be a nitrous car. It has a set of AFR's, edelbrock Super victor intake and a Comp nitrous cam. The shortblock itself is completely stock from a 92 LX.
We are currently switching it over to a built 393 ci windsor and a FAST system. Hope to have some new numbers before the end of the season.
FastlaneMotorsports 2 years ago