develop one that still keeps it original utility uses like the bed box and also make it mud, sand, forest, hunting, and rancher friendly then you'd have yourself one heluva setup, basically do up something like Ford's SVT Raptor truck it's city friendly, fast, offroad friendly, and can tow a boat to the lake or logs from the cabin, can be used for play as well as for work.
I want a polaris ranger / yamaha rhino with a 1000cc with original transfer case and transmission with full stock looks. Email me Hiperf2007@bevcomm.net. I'll pay top dollar.
put some nice looking covers over the engine, would make it look more pro. AND REP YOUR SHIT YOU DO GOOD WORK, WEBSITE AND PRICE ETC. always rep your shit (start and end your vid with SONIC RACING! say it with passion!)
@dfr87722:14 exposed belt dumbass. if you knew anything about belt driven motors you would know i'm correct. and how clever pick on my sled... your pathetic, you with you could own a sled from new worth 9000 dollars...
i dont WITH anything dumb ass learn how to speek then try tellin people somthin maby they will listen more. but if the clutch is good there will be enough pressure to spin it wet or dry so get your fuckin facts straight... o and by the way i own a apex 1100 and built a twin turbo system for it so dont go runnin of at the lip about yours haha
I know weights keep a constant rpm at a given load, but does it have spiral grooves on rear pulley so that when u open throttle it revs higher than when u r cruising?
on scooters the rear puley has grooves cut in a spiral so it keeps a higher ration when u accelerate as it twists the rear puller inwards, how does the snowmobile setup do this or is it just a contstant engine speed regardless of throttle/ acceleration/load?
@tpvalley i dont know for sure but i think it does, it has the same feel as a scooter, my 09 mxz doesn't move till you hit about 4000 rpm and it tops out at around 110 at 8000 i think, to be honest i wasn't looking at the tac going that fast, and when you let off the throttle there is a lot of engine breaking. i hope that was more helpful than those two...
that belt is in the stock location, and it usually has some shielding. it would get wet but i think its done like that for ease of installation and for reliability.
man, that was pretty sweet, i wanna see this thing rip around some more! less the music though, i love to hear a machine scream! go make another video, QUICK!
that belt would hurt if it ever broke and hit u...
hunterw6047 2 months ago
hey what would be a price for a rhino like that one?
Dan03skidoo600 6 months ago
That is frackin sweet. I'll take one.
992dr 1 year ago
No seatbelts.
Brainiac83 1 year ago
how much does it cost for the finish product?
jaker0712 1 year ago
This couldnt pull the skin off custard!
carpking49 1 year ago
what kind of cooling system does it have
smokenjoe777 1 year ago
develop one that still keeps it original utility uses like the bed box and also make it mud, sand, forest, hunting, and rancher friendly then you'd have yourself one heluva setup, basically do up something like Ford's SVT Raptor truck it's city friendly, fast, offroad friendly, and can tow a boat to the lake or logs from the cabin, can be used for play as well as for work.
aftoyboy 1 year ago
what part of pa are you from
BLEEDTHOUBLOOD 1 year ago
how much wud it cost for one of them with a automatic gearbox and super charger or turbo
mig123100 1 year ago
I want a polaris ranger / yamaha rhino with a 1000cc with original transfer case and transmission with full stock looks. Email me Hiperf2007@bevcomm.net. I'll pay top dollar.
hiperf2007 1 year ago
to bad they didn't have anyone who can drive to show off the machine
shawn950sm 1 year ago
awesome!!! btw great job;)
youjgh26 1 year ago
a ls1 would b best but its still hella fuckin raw
gmizuno21 1 year ago
@gmizuno21 there's no way in hell an ls1 would fit in there
bykerboy223 1 year ago
@bykerboy223 wouldn't it fit if you extend the frame, no bed and cut the floor pan for the transmission
gmizuno21 1 year ago
man, you could throw some stiffer springs in the primary clutch and that thing would be a fucking monster when launching
MrUnknown24 1 year ago
How much
towman1989 1 year ago
lol you look like the guy from final destination
jessebassmaster 1 year ago
looks like SHIT
guninhatersdown 1 year ago
i can program the controller on my electric UTV and make the torque so high that it burns rubber upon take off :)
haggman7 1 year ago
put some nice looking covers over the engine, would make it look more pro. AND REP YOUR SHIT YOU DO GOOD WORK, WEBSITE AND PRICE ETC. always rep your shit (start and end your vid with SONIC RACING! say it with passion!)
russell617 1 year ago
so you guys build em, what do you sell them completed for? my uncle would buy one in a second. ;p
russell617 1 year ago
awesome job lol that looks fun as shit to drive
russell617 1 year ago
you should probably get sometype of belt guard on there, with all that horse power that could be dangerous.
bobbyweatherly 2 years ago
does the 4 wheel drive system work with that
BMAN294 2 years ago
its only a two wheel drive now though isnt it
supermotofreak14 2 years ago
nice ; wicked
crownv80 2 years ago
Y de frenos que?
fcopagan 2 years ago
good luck in the rain... the belt will slip like crazy!!!!!!!
skidoomxz550x 2 years ago
not at all
dfr8772 2 years ago
@dfr8772 are you serious??? you can't be...
skidoomxz550x 2 years ago
sure am.... come on now you drive a mxz 550 why dont you get a real sled puss
dfr8772 2 years ago
@dfr8772 2:14 exposed belt dumbass. if you knew anything about belt driven motors you would know i'm correct. and how clever pick on my sled... your pathetic, you with you could own a sled from new worth 9000 dollars...
skidoomxz550x 2 years ago
i dont WITH anything dumb ass learn how to speek then try tellin people somthin maby they will listen more. but if the clutch is good there will be enough pressure to spin it wet or dry so get your fuckin facts straight... o and by the way i own a apex 1100 and built a twin turbo system for it so dont go runnin of at the lip about yours haha
dfr8772 2 years ago
do u know the answer?
how load changes the ratio?
I know weights keep a constant rpm at a given load, but does it have spiral grooves on rear pulley so that when u open throttle it revs higher than when u r cruising?
tpvalley 2 years ago
on scooters the rear puley has grooves cut in a spiral so it keeps a higher ration when u accelerate as it twists the rear puller inwards, how does the snowmobile setup do this or is it just a contstant engine speed regardless of throttle/ acceleration/load?
tpvalley 2 years ago
@tpvalley if the belt gets wet the belt wont grip the clutch... i've done it on fourwheelers and have seen it done on sleds
skidoomxz550x 2 years ago
yes, that obvious, I was wondering about the load changing the ratio aswell as the rpm.
tpvalley 2 years ago
@tpvalley idk
skidoomxz550x 2 years ago
i wouldnt ask that dumb bastard any thing hes not that bright
dfr8772 2 years ago
@tpvalley i dont know for sure but i think it does, it has the same feel as a scooter, my 09 mxz doesn't move till you hit about 4000 rpm and it tops out at around 110 at 8000 i think, to be honest i wasn't looking at the tac going that fast, and when you let off the throttle there is a lot of engine breaking. i hope that was more helpful than those two...
tonyf686 2 years ago
just a question, how much is a beast like that and do you build them in as a 4x4?
Steu022 2 years ago
m8 just put a R1 engine init that will go better
petrollee 2 years ago
Thank god this video has its sound disabled
I hate people who completely ruin the point of watching these videos, which is 95% of the time just to hear the engine.
WHAT MAKES YOU THINK WE WANT TO HEAR YOUR MUSIC AND NOT THE ENGINE LOL
mattmatt115 2 years ago 12
This video fucking sucks without sound
Badchevee1 2 years ago
you have got to get some reinforcing added to that roll cage and something to protect from the side.. nice looking ride though
sandman900rr 2 years ago
dam how much would somethink like that be O.o thier sick
wtfadiin 2 years ago
very fine piece of machinery, by the way what tranny and drive pulleys did you use?
excellent job¡¡¡¡
1blondie1978 2 years ago
can u guys do a repost with just the sound i wanna hear that rx1 straight out of the header lol
ndestito 2 years ago
Thats BS can't put music behind your videos everyone.
and1canobe 2 years ago 3
do the resolve thing or re upload it saying where the music is from or take the music out i wanna hear that thing
joeldude76 2 years ago
you just need to add the song name and artist into the vid so they get there credit.
pureadrenaline 2 years ago
If you know your video sucks without sound, why don't you upload it again without music?
feedmelies 2 years ago
THX WMG to have no sound. piece of shit of copyrighting audio
QuebecoisSti 2 years ago
damn that shit must be loud when your driving it, with the engine right behind you
thatcoolguy1 2 years ago
sweet ride!!
321462 2 years ago
i have a 700 S/E midnight armor... i wanna put a 1000cc engine in it how much would it cost?
taylorgskippy 2 years ago
how much would u guys sell one of thoughts? if u do
dvpracing387 2 years ago
Sick build!
WakeATV 2 years ago
holy shit that is bad ass hell!!!!
vmxrm85 2 years ago
That airbox looks restricitve. Are those holes on the top the only access for incoming air?
pooperscooper71 2 years ago
Gentleman,
Have you considered this powerplant in a yamaha golf cart?
hatchbw 2 years ago
i got a better 1 then that i got 1 with an rc 51 motor in it beat that and i take it to glamis every weekend
theoreomike 3 years ago
Nice ride. NIce song
HNWT 3 years ago
Turbo that shit, it needs a whistle!!
gggrimmm 3 years ago
where do they get the engines for these projects?
countyline81 3 years ago
very professional job!
Davidsfarm 3 years ago
first video i have seen where youve commented other then yours! :p
yamaharules163 3 years ago
no good anywhere near water though that belt would be wet in seconds
GregHarrison32 3 years ago 4
that belt is in the stock location, and it usually has some shielding. it would get wet but i think its done like that for ease of installation and for reliability.
campaug 3 years ago
@GregHarrison32 - might sound stupid but would it have a problem near water? i mean snow does get in the undercarage of snowmobiles..
cvcaliboy87 1 year ago
Could you possibly build one with a R1 engine in it, longer travel suspension, and still have the stock look? I'd buy one.
SuicidalTendencies21 3 years ago
That's straight up sick!
KaosBanshee44 3 years ago
do you think you could build me one
backwoodskid270 3 years ago
Sick man i love it!
10mcguire 3 years ago
Gear it for a top speed of 100mph and you will have all the acceleration you need with plenty of top speed.
and1canobe 3 years ago
any idea on the gear ratio
zoomzoomkid4 3 years ago
man do your exhaust pipes glow bright red hot
ballsniff13 3 years ago
i love how they cut the guy off while hes still talking
codester95 3 years ago 7
no one wanted to hear him talk anyway..... HAHA
and1canobe 3 years ago 3
will it pick the frunt end up?
mudpuppy4life 3 years ago
yeah it will pick up the front end. Its actually a pretty scary machine....
and1canobe 3 years ago
Sweet but it needs a Apex motor 150hp factory
pureadrenaline 3 years ago
more expensive and harder to tune = fuel injection
yamaharules163 3 years ago
alot faster and alot more power = fuel injection
xKOATIXx 3 years ago
instant throttle response, lots more power, and no tuning needed = fuel injection
bykerboy223 3 years ago
RX1 wasnt fuel injected
yamaharules163 3 years ago
man, that was pretty sweet, i wanna see this thing rip around some more! less the music though, i love to hear a machine scream! go make another video, QUICK!
berettaboy442 3 years ago
thats bad ass how much? does it still have four wheel drive
bigmo450 3 years ago
thats f'n sweet!
glacier1978 3 years ago