Flashing WM8505 Fake Apad / Epad / Eken / Irobot Uberoid ROM. Market Supported

[ishneet20]

hello my 7 inch VIA mid wm8650 touch does not work after upgrade.. what should I do in this case. tried different roms..nothing happened.. In one ROM i am touching the screen and only screen capture was getting selected. I dont know what to do.. Please can you provide with the firmware and rom.

[ginopunsalan]

My problem is when I boot with sd installed, the scripts won't run. the tablet boots and hangs into boot screen. Froyo. I am using 1gb micro sd. Help.

[HolanTV]

@ginopunsalan Try using a different rom. I think it's not the same firmware, try changing a different one.

[ginopunsalan]

@HolanTV If a rom does install and it is the wrong one, can it brick my ePad?

[HolanTV]

@ginopunsalan For the WM8505 will be easier to brick. But the newer ones are not that easily being bricked.

[ginopunsalan]

@HolanTV Thanks for advice. I successfully flashed Dr. Cheap M009s mod rom. But touch screen doesn't work. I am now going to try Eken M009s capacitive screen rom. 3 versions are available. One single touch and 2 capacitive.

[HolanTV]

@ginopunsalan Ah ok. Could be a different rom. Check out their forums or Q & A section. There should be a fix for the touch screen. Never the less. Have fun!

[ginopunsalan]

@HolanTV Oh what fun it was. Finally I found a rom that works. It's the Uberoid v11. I used option 8 in Changer. Thanks for the assistance. I just saved a tablet.

[shane8109]

I did this but then the screen fried the next day so I sent it back. Too bad I was looking forward to it

[HolanTV]

@shane8109 Sorry to hear that. But I doubt that the OS could do anything to it.  As it just tweak the current OS in terms of applications and adding on several apps. Maybe you may need to check the forums on it.

[shane8109]

@HolanTV I figured it was just a hardware issue and got a refund. Thanks for the reply though

[HolanTV]

@shane8109 Glad to know that you managed to get a refund for it. Have a nice weekend.

[fungabunga]

i tried to install this on my tablet went fine but i cant get past the uberoid loading screen

[HolanTV]

@fungabunga Could it be because you loaded a different rom? Try other version see if it helps or not.

[rogman000]

I guys please help me!!!! I tried to install uberoid on my tablet, but something unespected happened; the tablet does not boot, the screen become turned on and white. I am not sure what is the model, the user manual doesn't say nothing; the device shows the model as WonderMedia WM8650, Android version 2.2, Year 2011, there are two leds - blue when the device is turned on and red when the device is charging. Help me please or I can be crazy!!!!!!!!!

[HolanTV]

@rogman000 Hi this rom is for the WM8505. Technically you shouldn't be able to install it, in the first place. Try going to the latest visiting the website posted with this video, and check out the latest rom there.

[HolanTV]

@rogman000 Hi this rom is for the WM8505. Technically you shouldn't be able to install it, in the first place. Try going to the latest visiting the website posted with this video, and check out the latest rom there.

[joshuacondriel]

when i copied the files on the sd card then insert it to the tablet, then boot, nothing shows up, it boots to the os.... not on the setup.... so what i need to run the setup?

[HolanTV]

@joshuacondriel When you extract the files is it in a script folder? And make sure you get the right version for your tablet in terms of the outlook of your tab. Good luck.

[joshuacondriel]

@HolanTV what do you mean "script folder"?

[HolanTV]

@joshuacondriel You extract the downloaded files, it should gives you a script folder. Copy that script folder onto your tablet and by right it should boot into the installation screen

[bheto619]

Hi! very informative video here. May I just know if this one is WM8505 chip? I want to update my Apad. I've opened it and it is WM8505. Board number is BV08_819_8505_V1_1 2010.11.19. Thanks in advance!

[HolanTV]

@bheto619 Hi. I never really open up the pad. When is you turn on your pad what color is the LED, charging LED, and also the input jack what color is it.

[HolanTV]

@faithnotneeded Have you tried other version of the files? Normally if your tablet is not WM8650 it wouldn't have installed the script in the first place. But since you managed to install it, maybe try different settings and see if it works or not.

[MrJ0mmy]

what is this 2.1 or is it 1.6

[HolanTV]

@MrJ0mmy The one I installed is 1.6 version. You can check out their site and see if there's your version or not.

[zebedy212]

one of the worst videos I've seen the camera is all over the place and it's in low res. Sort it out ffs!!!

[HolanTV]

@zebedy212 Thank you for your input. Will improve the next time. Cheers!

[bobdotexe]

I have a m009s, I tried both roms, one would not boot, the other the touch screen did not work :(

[HolanTV]

@bobdotexe Have you tried looking here ? techknow . freeforums . org / resolving-touchscreen-problems­-t693.html

[rmafuz1]

Hi, you state on the video to click the link below to download the file, but the is not a link to click, plase could you let me know where to download for an epad. Thanks

[HolanTV]

@rmafuz1 When you click on the link, it will show you a list of supported devices. You just need to make sure which rom is suitable for your device. Just check the description and have a look at it. HOpe it helps..

[BeeonUtube]

I installed this on my fake 2.2 FlyTouch (MID) (Blue LED) (WMT2.1.2 and 2.1.1) and its stable, fast and anything I wanted since then. I donated as well. Well done Mr Uberoid !

[HolanTV]

@BeeonUtube Glad to know you loved it and donated. Have fun with your new firmware :)

[toto201026]

what name files ?

[HolanTV]

@toto201026 Go to the link which is written in the description

[wikang82]

try but failed... had followed all instruction

[HolanTV]

@wikang82 Did you download the correct rom? What pad were you using?

[Doctoratkins]

Where can I get the android 1.6 file?

[HolanTV]

@Doctoratkins The one in this video is where I am using FlyTouch (MID) (Blue LED) (Fake 2.2) (WMT2.1.2 and 2.1.1) ROM from the link under the description. Just check if it fits your tablet or not, else it may break it instead.