Added: 2 years ago
From: UAConspiracy
Views: 87,455
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (79)

Sign In or Sign Up now to post a comment!
  • *finally saws tip of the cone off*

    FINALLY! After half an hour, I can wear my new pants!

    *finds out that "tan plastic piece" is made of

    FUCKING

    METAL*

    ...why. 8C

  • sedgambit its "possession of a deadly weapon" charge you stupid fuck

  • I don't see why people would be angry this was up. Unless they own a mall or retail store, and find it personally detrimental and offensive? I mean honestly I just bought a dress and the retail chick must not have been paying attention because she left the security tag on, so I'll probably try this out, thank you!

  • @miracle990 y would you do tht!?

  • i did everything the video said and i still can't get it off

  • You are my saviour!!! Thanks mate :-)

  • name of the song?

  • Thank you sooooo much for this video! Only took me 10 minutes! You're the best! :)

  • Awesome that took like 2 minutes!! Thank you!

  • Omgeee! You're a life saverrr(:

  • Comment removed

  • this dosent work with the rectangle kind judt so u people know

  • Just did it took less than 5 min..Thanks... I did it with kitchen knife... thanks

  • @ferni1023 so you went out into the public with a kitchen knife? good luck with that 'possession of an offesnsive weapon' charge. I dont thin you'll do any more than about 6 months in jail.....

  • Thanks this helped alot! It takes less time if you use a high quality knife only like 5 mins

  • Me and my best friend did this on two pairs of jeans I bought because we didn't keep the recipt. It took us 5 minutes when it took you 20...? We're only 15. And we're girls. Take that. :P

  • Thank you SO much. I shopped in the USA yesterday, came back to Canada, and discovered a shirt still had the ink button! It took some effort, but the result is exactly as shown.

  • thank you so much! i had a shirt for three months that i didnt know what to do with because i lost the receipt!!! :)

  • THANKS A SHIT LOAD but it took my like 10mins with a bumby knife

  • ur guna spend 20 mins in the store sawing!?

  • @anotheraccount420 the ink tag doesnt set off the alarm. you can just take it home then take off the tag

  • @anotheraccount420

    why in the world would you want to steal clothes or other things?!?

  • Thanks, just to add to this guys video. If it doesn't remove after the spring comes out dig a bit deeper and lift from the metal cylinder and pry it. Saved me a trip back down to Seattle!

  • Comment removed

  • Fuck dude like 20 minutes of hacking away won't cause attention or anything

  • Is the ink in it poisonous??

  • Ah, I can't thank you enough!!

  • wonder how many criminals this attracted

  • lolhow will you do this in a store???

  • Or Burn off The Tip Part with out using a blade

  • wats the songs name

  • all you gotta do is saw the metal bar in between

  • pair of pants as a gift with an ink tag on. it worked just like you showed. thanks

  • thank you this video really helped me out! I was given a

  • dis what i gotta do smh

  • wow another easier way to get caught shoplifting

  • omg sickk dude thankss mannnnn

  • for the see through plastic one that is a rectangle u need to take of the plastic cover at the bottem then pull out the spring make sure you rape the ink in a plastic bag just in case. my second one bust but the bag stopped it

  • in school we just pulled it appart...and nothing happened, and we done it twice :P

  • i cut the top off and removed the spring but it didn't fall apart?? am i just not pulling hard enough?

  • how did all you people get out of the store without that thing ringing??

  • Thank you! I bought a sweater yesterday & the tag (which is the same one you had) was still on it. I honestly don't feel like going back to get it removed sooooo now I can do it myself!!!

  • Omg thanks!

  • Thank you!!! I bought a shirt today from JCPenny and they didn't take that off!! I mean I could have drove the hour back and gotten it taken off but this only took me like 10 minutes(because I burnt the plastic to make it softer) took off the half metal circle burnt through the clear circle inside to reveal the spring and.....you know the rest lol

  • how do you demagnitize a security tag? (those thin ones)

  • my daughter went with my Mom to get some school clothes. Tonight the night before she starts school, she brings me a shirt with a security tag. I called the store and was told we could bring it in, but we had no time. I never stole clothes before, so here I am and I never thought having this type of information available to the public was a safe idea, but Ahhh haaa! Seeing what these devices had inside them helped us drill off the top of the tag and within minutes my daughter was like new!

  • It WORKED, THANKS DUDE...i purchased a $22.00 shirt from six flags in New Jersey...when i returned home (New York) i saw the Security Tag and i was PISSED...the tag read "injury from permanent ink and glass will result if forced off"...i went on youtube...saw your vid...now all is well:)

  • Thanks, I totally didn't like the sound in the background, either, but I exercised my right to use the mute button, so it's all good. We bought some pants the day before a flight out of the country and left the store AFTER PURCHASING THEM with this stupid device attached. It never beeped, and we didn't see it until we were packing. We had a little saw that worked perfectly. Thanks for taking the time to post this...you saved some honest people a priceless hour (or more) of time.

  • @procrastistamper Sorry about the music, just wanted to add a bit more pizazz, guess that didn't go all too well. So yeah if yall don't like it just mute :)

  • @UAConspiracy LOL i lovve this song!! hehe Pizazz..

  • This video would have been totally awesome if that noise masquerading as music would have been bypassed.

  • Is there in cabine exist some detector against removing security tag, if I remove this with magnet?? Tnx for answer!!

  • amazinggggggggggggggggggg((:

  • You are great!!!!

    

  • if your reading this to learn how remove tags from stolen shit, the first thing you should steal is a dremel tool to cut through the plastic, unless your planning on suing the tag company for contributing to you cutting your hands on your stolen wares.

  • my dumb ass cashier forgot to take off my shit thanks for the vid

  • way to cut towards your hands..

  • @ThatLoudGuyMike I stare death in the eyes

  • @UAConspiracy You're a piece of shit. I'm reporting this stupid video. Loser.

  • thnx m8 tht was a brill vidio i did it coz i brought some jeans and they forgot to take it off so i tried 2 get it off with this vidio and it worked. this is wat to do saw and file top till smooth, then take the rubber bit that is covering the spring. get a nife and take the spring out, pull the back off and all done :D

  • Just take a lighter and light the cone end until it starts to melt the plastic when the spring pops out ur done just flip the tag over let the ball bearings fall out and the tag will come of just as easy...This video is a joke takes to much time to be fucking around

  • good tutorial. thnx bud

  • I tried using a magnet for my pants tag but it didnt work?What else can i do besides sawing

  • sdf

  • sdf

  • strong magnets work so much easier.

    (y)

  • @xtamarajaydex how? where can i get one from?

  • tyvm i got my ink sensor of my jacket (:

  • Just do a search online for a Grade N42 Neodymium magnet!

    I personally use a Ring Shape Neodymium magnet about 2" thick by 2" diameter, really cheap and it removes most types of magnetic tags...

  • K thanks it actually help

  • theres a little space under and you can pop the the cone part off with a knife, its just a cover

  • dude just melt it with a lighter and push the melted plastic away with plyers and it comes apart

  • just heat up the knife for quit a while on a stove top and the cone top will come off like butter!!!!

    no need 2 actually saw!

  • use a strong neodymium magnet from a hard drive or just get a dremel tool with a cutting wheel and use that.

  • Where can u get a strong Magnet?

    I just spent 5mins cutting the top off with a hax saw.

    All too easy. Great Vid.

  • rip open a dead computer hard drive, theres a super magnet inside or take apart one of those shake flashlights. the magnets in those are insanely strong.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more