after I attempt the fs=fat32 command it returns "Virtual Disk Service error: The volume size is too small." Any ideas? I'm trying to salvage a corrupted 32gb key, and diskpart only recognizes it as 8mb
you got to press windos + r(run) then go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\StorageDevicePolicies (if storage device policies is not there create it in storage then create a REG_DWORD named WriteProtect double click valor 0 hexidecimale reboot (restart pc) then you format your usb flash drive without quick format :) good luck and thums up and copy it to other videos.
in my usb drive it shows nothing means it didnt shows the label, Fs, size0B, status unusable, and no info are indicating which means what help me please ihave 8 gb pendrive
When I "list disk" , it comes up with only one option, "disk 0", and if I type "select disk 1" anyway, it says "no disk 1 exist"..... What can I do????
dude thank you so much i was looking on the internet for 5 hours and finally found this tutorial and I want to tell you thank you for the help and my problem was solved
I have a 32 Gig datastickPro from centron and my pc only se it as an 8.Mb. I have tryed everything and nothing works. Any body no what I am doing wrong. thank's Mike E
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
@madlangpeeps I had a corrupt USB key than he said the same thing, and i had to buy another one ... maybe is the same problem i guess if you don't have a button for unprotect the USB drive ....
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
OMG THANKS BRUHH IM SUBSCRIBING
muhammed2092 1 week ago
This has been flagged as spam show
/watch?v=CkknSHyu72E
watch how to format USB flash drive,hope it will help you
kenpatchi13 1 week ago
thanks you u are the best !
anderpr 1 week ago
Thanks for uploading this vid man! i just ressurected my flash drive! More power!
CedieThunderUp 1 week ago
nice one your my idol
imlhove14 1 week ago
i typed list disk, only my computer harddrive showed, didnt see my usb
OblivionSkyrimModz 2 weeks ago
@OblivionSkyrimModz do list volume it should come up. i had the same problem.
Bennylava28 6 days ago
Nice video GREAT INSTRUMENTAL!!!!!
AyNoMamezweey 3 weeks ago
I cant find my disk help asap?
iAznBen 4 weeks ago
after I attempt the fs=fat32 command it returns "Virtual Disk Service error: The volume size is too small." Any ideas? I'm trying to salvage a corrupted 32gb key, and diskpart only recognizes it as 8mb
AchillesStandsOn 1 month ago
its same to the quick format
MrDarkzone93 1 month ago
You're awesome!
rasimusic 1 month ago
is the command clean mean formatting it?
Ikhwan4713 2 months ago
This has been flagged as spam show
you got to press windos + r(run) then go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\StorageDevicePolicies (if storage device policies is not there create it in storage then create a REG_DWORD named WriteProtect double click valor 0 hexidecimale reboot (restart pc) then you format your usb flash drive without quick format :) good luck and thums up and copy it to other videos.
JAckasstylenicos 3 months ago
wow wats the musik
773aaron 3 months ago
@773aaron it's tupac-''how do you want it''
bahemutking12 2 months ago
Thanks a lot! man, This video IS the best solution to any dead USB.
Kisame0Akatsuki 3 months ago in playlist Flash Drive Repair
This has been flagged as spam show
after i type format fs-fat32
its give me this massge
the arguements specified for this command are not vaild for more information on the command type:HELP FORMAT
z3lotalm3lot 4 months ago
in my usb drive it shows nothing means it didnt shows the label, Fs, size0B, status unusable, and no info are indicating which means what help me please ihave 8 gb pendrive
ratnakarram 4 months ago
in my case it says diskpart has encountered an error: The media is write protected See the system event log for more information.. what should i do.?
im using windows 7
millexandria091907 5 months ago
This has been flagged as spam show
When I "list disk" , it comes up with only one option, "disk 0", and if I type "select disk 1" anyway, it says "no disk 1 exist"..... What can I do????
thomasedinburgh 5 months ago
mamu ti jebem nubersku neceeeeeeeeeeeeeee!!!
TheBadError 5 months ago
dude thank you so much i was looking on the internet for 5 hours and finally found this tutorial and I want to tell you thank you for the help and my problem was solved
youngmasterfung 6 months ago
btw when i right click my fd it shows 0 bytes and file system is raw. need help pls!
bubidong 6 months ago
need help mine says disk part has encountered an error : the parameter is incorrect see the system event log for more information
bubidong 6 months ago
I have a 32 Gig datastickPro from centron and my pc only se it as an 8.Mb. I have tryed everything and nothing works. Any body no what I am doing wrong. thank's Mike E
mikee32671 6 months ago
Mine says that the parameter is incorrect and volume is too small
darrill99 6 months ago in playlist recover
FUCKING MUSIC
varix3d 7 months ago 2
after i type clean it says error
Theodorthetieguy 8 months ago
I followed the instructions but when i type format fs=fat32...the window says
volume size too small...wtf?
DhritiWTFB 8 months ago
You need to use 'CLEAN ALL'. If you don't put 'ALL' after 'CLEAN', only the first and the last Megabyte off the disk are deleted.
gettoezblaster 9 months ago
YOU ARE AMAZING THANK YOU SOO MUCH I WAS READY TO BUY A NEW 32 GIG USB STICK !
Toxicnitr8 9 months ago
i have a j usb what it is plzz tell
foodsis 9 months ago
Thank you for a nice video, I finally reformatted my USB. :)
Elio3o 9 months ago
hay man its formating wht if it gose rong with it with my USB
jgkrapster 10 months ago
after i type clean nothing happens after that
plss help
ChAeLeX 11 months ago
@ChAeLeX you should continue the next steps i mean, the next command ? it doesn't work ?
Mr7WAL 11 months ago
will you decipher the ...::: OnyxCode :::...
OnyxCode 11 months ago
fucking cool dud thanx :)
Vistahaha1997 1 year ago
when i insert my usb it appears in the computer but when i open it. it says insert a disk into drive what is the problem can u help me pls..
frozenheartjaycee 1 year ago
ahhm how to hide and unhide files from usb using the command prompt.. tnx nice video
johnzHel24 1 year ago
This has been flagged as spam show
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
ericortega1978 1 year ago
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
ericortega1978 1 year ago
woah, it says DiskPart has encountered an error: The media is write protected. :( What should i do!!!!!
madlangpeeps 1 year ago
@madlangpeeps I had a corrupt USB key than he said the same thing, and i had to buy another one ... maybe is the same problem i guess if you don't have a button for unprotect the USB drive ....
Mr7WAL 1 year ago
This has been flagged as spam show
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
ericortega1978 1 year ago
This has been flagged as spam show
type cmd format F: then enter,,after you press d enter,remove d usb from d port and try to put it back then press enter again,,just wait untill d format is complete..when format is complete remove d usb again and put it back then click format disk and its done.;-)
ericortega1978 1 year ago
wow man thnx u helped me once i did that way but i stopped at cmd clean andi lost all space now they are back thnx i subscribed
TheDarkmohha 1 year ago
is this functional on xp?
The304Experience 1 year ago
@The304Experience I dont think so, the (diskpart) version is not the same...
Mr7WAL 1 year ago