How To Disassemble an Airsoft AEG M4 [HD]

[chubmcy17]

Test

[chubmcy17]

I recently took the arrow out my knee. But suddenly, out of fucking nowhere, a dragon pops up and unfortunately shot my other knee with an arrow.

[chubmcy17]

I did this then took an arrow to the knee

[Stryker0726]

@chubmcy17 shut up

[Xanthisis]

That my friend, although is on an m4 platform, is an M16a4.



[JEAirs0ft]

@Xanthisis Indeed it is haha

[GsxRaider]

@JEAirs0ft hey man which is better the flat head screw or the small allen hex key motor height adjuster? thanks.hope u still got a video tutorial on how to open gearbox.

[TheGreyDecember]

Great help. My front pin is being stubborn

[p8intballkid]

Do you happen to know how to get the charging handle assembly back in?

[JEAirs0ft]

@p8intballkid Did the spring get messed up or it just popped out? If the spring got messed up there is a good chance you need to get a new spring in order to re-install it. I'm not exactly clear on the installation but I think the spring is hooked on to the charging handle and then hooked into the receiver.

[p8intballkid]

@JEAirs0ft I didnt even touch it, it fell out and my local field is like rararara we might not be able to fix it rarararara

[ndvenckus1]

Not saying that this isn't a good tutorial and all, but for something more "in depth" check out this website, it's great :) "MECHBOXDOTCOMSLASHM4M16" Sorry for the formatting, stupid youtube :P

[BIGBo0mzZ]

is it possible to put a crane stock on this gun because putting on a buffer seems like it would be a challenge, great vid btw it helped me alot

[JEAirs0ft]

@BIGBo0mzZ You need a buffer tube in order to put on any type of a collapsible stock such as a crane stock. Installing the buffer tube is not hard at all because all thats holding it into the gun is a screw, you just need a longer screwdriver to reach it.

[xOddballProductionsx]

removing the gearbox is a pain in the ass

[daykotaskate]

help i have a broken parts idk how to replace cuz idk what there called 1.is the bolt catch but its a standerd aeg but that parts missing 2. the door that shields the hop up n stuff idk what that called pls help!

[JEAirs0ft]

@daykotaskate Relax, the bolt catch and the dust cover do not affect your gun at all. There are just for aesthetics in your case.

[joeMopar412]

HELP! i'm trying to replace/return the charging handle slide the opens the hopper door on my, JG M4 CQB.. the spring seem too long and im not getting propper tension to keep the slide in its propper position.. i had the upper removed for some cleaning and accidently pulled on it and the spring just popped off.. if you could please message me back or post a video showing me how to get it done.

[TI23Y]

Hey could someone tell me if you have to remove the bolt catch since there is a visible pin??

[JEAirs0ft]

@TI23Y Just pop out the pin that holds the bolt catch if it impedes you from removing the upper.

[iLikeGuns88]

@JEAirs0ft Do you know how to remove/install the front barrel assembly?  If so please tell me.

[JEAirs0ft]

@iLikeGuns88 If yours is a real steel type delta ring you can use a barrel wrench and take off take off the outer barrel. If yours isn't a real steel type of delta ring then do some research.

[iLikeGuns88]

@JEAirs0ft That helps a lot since mine is steal. Thanks.

[dylan52999]

hey whats the difference of a long or short type motor

[JEAirs0ft]

@dylan52999 For different versions of the gear box or different guns

[C4Philip206]

was that gun dirty

[ItalianBoy182]

my mag release screw wont come out what should i do? it just keeps on spinning but not going any where...

[JEAirs0ft]

@ItalianBoy182 I honestly don't know, but I'm guessing the screw is stripped.

[AirsoftShizsAndGigs]

@JEAirs0ft dissasembly with a rear wired gun is so much easier then a front wired gun...

[TheTacticalAirsofter]

Hey do you HAVE to take the mag release out

[JEAirs0ft]

@TheTacticalAirsofter To get to the gearbox? Yes. If yours doesn't have a screw on it then its a real steel style mag release, in which you just screw off on the longer side.

[fireitup9]

Will this work for the G&G M4 Raider?

[JEAirs0ft]

@fireitup9 Yes, its just you have to remove the stock to remove the buffer tube. Sorry about the late response

[fireitup9]

@JEAirs0ft Thanks. Dude, the G&G M4 Raider is a sick gun. I put in a 6.01 barrel, new crane stock, V-grip, re greased and re-shimmed the gears. I'm hitting 370 FPS now. Cause I finally got it open.

[TheTightRappist]

thanks man this helped me alot unjamming a bb in my barrel

[the18gearJammer]

what gun is this???

[JEAirs0ft]

@the18gearJammer Just a CA M4 I was fixing for my friend.

[stapler1212]

When removing the gearbox from the receiver it always helps me to put the gun into semi-auto.

[JEAirs0ft]

@stapler1212 I should put that in as an annotation instead of putting it in the description

[darkerik411]

i use to have that battery!!!

[ooopppiikkk]

do u have to re do the motor hight adjustment when reassembling it?

[JEAirs0ft]

@ooopppiikkk No you don't have to. Unless you accidently changed the height when you were disassembling