i love your layout .there arent to many ns modelers out there i here alot of great things about dcc but i have to many locos (150)right now it would be really expensive to convert all that over ,great layout and set up
Thanks! It about 23 by 23. The black box is a meeter that measures the amps exiting the DCC booster. It lets us know how many amps we are pulling to make sure that we dont overload the system.
how many amps do you need for your layout? like what sort of power boosters are you using? im redoing my layout and it is going to need a new system and i think i might switch to digitrax.....
It depends on how many trains we're running, but usually we pull about 5amps with all the engines running.. We have a Digitrax 20 amp power booster and it runs through 4 circut breakers. Sweet! Well if u get it ime sure youll like it! I really like the Digitrax system
holy****! nice layout! you just earned yourself a new suscriber!
you should make the track that disconnects by the door so that if it is disconnected, it cuts power for a small section of track so you don't have any acidents.
wow! awesome. and is this your personal layout or will there be lots of people operating it like a club layout kinda thing? very awesome engine facility too i just got an idea from yours!
Thank you! The kato sd80mac has a loksound decoder in it that i recently installed, but we are having problems with the volume. You can barely hear it and i think its because i need a box for the speaker.
on the penisula there is going to be a velley in the center with a big bridge at the end.. Its something unique because most seem to be mountains... there is going to be a small town at the top of the climb and the upper level yard is going to be a paperplant. but there will be lots of mountains and tree's. the layout sceney will be based on the smokey mountains in NC.
You Know You Should Make Like.. Monthly Layout Updates Or Something Like I Really Like Your Yard And Every Thing! Check Out Mine If You Want Too Mines ALOT Smaller Than Yours Though!
Im Just Wondering But How Big Is That Room?? AWESOME Looking Layout Though!!!
anytime! cool! we were going to use code 83, but we needed lots of curved turnouts and we couldnt find any and we didnt want to have to cutom make them...
I don't blame you either I do not want to even try to hand lay track. I give props to the people that have the time an money to custom make track and turnouts!!!!
i can't wait 'til you finish it! how long do you think it will take? mine only takes a week to redo so i'm already finished with it! (i'll make a video of it on Friday if you wanted to know) anyway that's an awesome layout!
Engines: Locomotives, and I love them... The closest to NS I have is a N&W GP38-2 by LifeLike
BadassDodgeRam3500 7 months ago
nice setup, I wish I could set up a room in my house, my wife would murder me if I went that far.
MrFeasterbunny 1 year ago
Incredible sir! Cant wait to see what else you have in store for us :D
cubspiano 1 year ago
LOOKS AWESOME
UNIONPACIFIC1 1 year ago
Hey, nice train layout, i like the railroad yard you made.
NSrailfest 1 year ago
do you still have those MP-15DCs @: 1:18? I need some for this one that i got at a train show!!!!!
callawaybros 2 years ago
Glad I watched this vid. Your layout seems a lot less confusing and not as big as I thought it was. Still a big layout.
railfanfromiantha 2 years ago
nice tour and a really kool layout...)
svinehunden 2 years ago
where did you get the engine shop with platforms?? thats exactly what i been looking for...
RyanSamuelBarry 2 years ago
Its part of the walthers corner stone searies and unfortunately i dont know the number for it.
NSmodeler24 2 years ago
i have a sd70 mac santa fe and it is sweet
JacobandAaronshow09 2 years ago
wow! how long did that take and how did you do it?
ucvgabe 2 years ago
I have the BNSF version of that SD60M from PROTO 2000. It has the 3 windows too
csxketh1 2 years ago
are you guys going to switch to the new digitrax controlers the dt402s?
LIONELTRAINS4LIFE 2 years ago
great layout
motorman1993 2 years ago
Thanks!
NSmodeler24 2 years ago
Great job - can't wait for future updates. - Kevin
6ftguy 2 years ago
Thanks!
NSmodeler24 2 years ago
hey man that is soo coool expecially by the door HOW MUCH MONEY DID U SPEND????
keytonsgangsta 2 years ago
You are seriously one talented man! Good work!
MusicalElitist1 2 years ago
holy shit ur talented.... :D im speechless.. how much time and money have spent so far and i so xant wait till the ;layout is finished
rempledisposal 2 years ago
i love it
csxgk94 2 years ago
i love your layout .there arent to many ns modelers out there i here alot of great things about dcc but i have to many locos (150)right now it would be really expensive to convert all that over ,great layout and set up
norfolksouthern8941 2 years ago
Nice layout. How big is it. What is that
black thing that is in the DCC cabnet with
the number readout on it?
foxrivermotorman 2 years ago
Thanks! It about 23 by 23. The black box is a meeter that measures the amps exiting the DCC booster. It lets us know how many amps we are pulling to make sure that we dont overload the system.
NSmodeler24 2 years ago
how many amps do you need for your layout? like what sort of power boosters are you using? im redoing my layout and it is going to need a new system and i think i might switch to digitrax.....
Guilford88panam 2 years ago
It depends on how many trains we're running, but usually we pull about 5amps with all the engines running.. We have a Digitrax 20 amp power booster and it runs through 4 circut breakers. Sweet! Well if u get it ime sure youll like it! I really like the Digitrax system
NSmodeler24 2 years ago
ahhah dang man!!!!! thats cool thanks for the info man!
Guilford88panam 2 years ago
Anytime!
NSmodeler24 2 years ago
This is one of the best layouts I have ever seen!!! Great Job!
NafisC 2 years ago
Thank you!!! Means alot!
-Josh
NSmodeler24 2 years ago
Do you have a wb site? I'd like to see the layout on paper. Nice. Were are you located? Can I bing my roster and run on your layout?
dcalcutt 3 years ago
No we dont yet. In WNC. Ya maby sometime when we finish laying the track and wiring it up!
NSmodeler24 3 years ago
how large is this layout
what size room do you have it in
looks awsome so far
it the video updates coming!!!
CSX35 3 years ago
The room and layout is about 23 by 23 and Its in our basement. Thanks!
NSmodeler24 3 years ago
holy****! nice layout! you just earned yourself a new suscriber!
you should make the track that disconnects by the door so that if it is disconnected, it cuts power for a small section of track so you don't have any acidents.
BNkid13 3 years ago
Thanks! It already does that. When the door is opened, it shuts off power for about 2-3 feet in both directions!
NSmodeler24 3 years ago
cool!
BNkid13 3 years ago
man you must have a big power booster for all that track and loco and sound locos damn. what dcc system do you use? very sweet layout
Guilford88panam 3 years ago
We do! and we use a Digitrax super chief. Thanks
NSmodeler24 3 years ago
wow! awesome. and is this your personal layout or will there be lots of people operating it like a club layout kinda thing? very awesome engine facility too i just got an idea from yours!
Guilford88panam 3 years ago
Thanks! Its our personal layout, but when we finish the track we will have people over every once in a while to run. thanks! Cool!
NSmodeler24 3 years ago
thats cool man goodluck. waittt one more question....haha are you going to have like a layout update vids? cause that would be pretty damn cool man.
Guilford88panam 3 years ago
thanx! lol yes I will! Ime about to post a video of the climb! weve layed track an about half of it!
NSmodeler24 3 years ago
thank you, might I ask who is funding the layout?
NorfolkSouthern9708 3 years ago
This our home layout.
NSmodeler24 3 years ago
who made your track?
andersonjjj333 3 years ago
atlas
NSmodeler24 3 years ago
your trains look very nice
andersonjjj333 3 years ago
Very very nice Kato and atlas make an outstanding engine i like that tower you have
andersonjjj333 3 years ago
Thank you! The kato sd80mac has a loksound decoder in it that i recently installed, but we are having problems with the volume. You can barely hear it and i think its because i need a box for the speaker.
NSmodeler24 3 years ago
Awesome layout!!
and sweet stuff you got!!
unionp509 3 years ago
thanks!
NSmodeler24 3 years ago
Very nice, looks like another year of work, thanks 4 keeping us posted. Great Job
ohiosouthern 3 years ago
yep! Your Welcome! Thanks!
NSmodeler24 3 years ago
how did you make the pull out door with out having dead spots in the track
engineco46 3 years ago
the door is wired so there is constant power to it. when you open the door however, track power stops for 3 feet in both directions from the door!
NSmodeler24 3 years ago
how are you going to scenic the climb to the upper level? Seems like quite a challenge to build
Tjsingle14 3 years ago
on the penisula there is going to be a velley in the center with a big bridge at the end.. Its something unique because most seem to be mountains... there is going to be a small town at the top of the climb and the upper level yard is going to be a paperplant. but there will be lots of mountains and tree's. the layout sceney will be based on the smokey mountains in NC.
NSmodeler24 3 years ago
Now THATS a nice Layout.
bigger than mine......not jealous tho..lol
what im jealous is, you have more NS locomotives than me! haha.
Your layouts VERY well planned out. my hat goes off to you!! I cant wait to see a full run around the layout with your trains!
conrailbuff 3 years ago
lol thank you very much.
Its coming. weve almost got the track finished and wired on the climb now! Ill get a video up when its completed...
NSmodeler24 3 years ago
Cool Layout!
You Know You Should Make Like.. Monthly Layout Updates Or Something Like I Really Like Your Yard And Every Thing! Check Out Mine If You Want Too Mines ALOT Smaller Than Yours Though!
Im Just Wondering But How Big Is That Room?? AWESOME Looking Layout Though!!!
HarrisAndCentral 3 years ago
thanks you! the room and layout are about 23 by 23... thanks!
NSmodeler24 3 years ago
WOW lol Thats Alot Bigger Than Mine!
HarrisAndCentral 3 years ago
what kind of track do you use?
LIONELTRAINS4LIFE 3 years ago
we use a Digitrax DCC system and Atlas code 100 track.
NSmodeler24 3 years ago
Thanks for the info I plan on using Digitrax also but with Atlas code 83 track and Walthers turnouts.
LIONELTRAINS4LIFE 3 years ago
anytime! cool! we were going to use code 83, but we needed lots of curved turnouts and we couldnt find any and we didnt want to have to cutom make them...
NSmodeler24 3 years ago
I don't blame you either I do not want to even try to hand lay track. I give props to the people that have the time an money to custom make track and turnouts!!!!
LIONELTRAINS4LIFE 3 years ago
yeah. Me too. They look great but they are very time consuming and take alot of skill.
NSmodeler24 3 years ago
That they do!!!!!
LIONELTRAINS4LIFE 3 years ago
Comment removed
LIONELTRAINS4LIFE 3 years ago
that's a great layout! can i have it? lol
i can't wait 'til you finish it! how long do you think it will take? mine only takes a week to redo so i'm already finished with it! (i'll make a video of it on Friday if you wanted to know) anyway that's an awesome layout!
Sabrestrainsfan 3 years ago
lol Thanks! sweet!
NSmodeler24 3 years ago