a una psp 2000 con placa maldita a base de un programa parecido al chiquen le instale un software (5.50gen-d3) se quedo en negro con la luz prendida y esta inservible ¿hay forma de repararla?
esta solucion no funciona en ninguna de las PSPS que tu dices, solo funciona hasta la placa TA-081, a partir de la 082, se inutizo toda posibilidad de implantar este chip.
The trace exposure and soldering are the most difficult parts. Put the camera on a tri-pod and just shoot at an angle zoomed in. Turn off the camera's auto focus and just dial it in manually.
Why don't you scrape the traces before you stick down the FPC on the mobo like the instructions say?
Wear an ESD wrist strap connected to a conductive mat that you work on, ground the whole setup. The electronics you are handling are very sensitive to ESD, and can be damaged easily.
Too late to post some constructive feedback and start a discussion? Never. You read my 3 month old comments... even if you don't agree with anything I said, mission accomplished.
a una psp 2000 con placa maldita a base de un programa parecido al chiquen le instale un software (5.50gen-d3) se quedo en negro con la luz prendida y esta inservible ¿hay forma de repararla?
xXsant95Xx 1 year ago
en psp 300 funciona? en pspgo????
LEOIC82 1 year ago
@LEOIC82 hola
esta solucion no funciona en ninguna de las PSPS que tu dices, solo funciona hasta la placa TA-081, a partir de la 082, se inutizo toda posibilidad de implantar este chip.
SALU2
BENDERB35RGBUPLOADER 4 months ago
Soldering things on psp is a joke.
kiewzhenyi 1 year ago
is dark alex talking
rafahemir 2 years ago
@rafahemir Really??
guitarrakapo 1 year ago
Comment removed
leunaum 2 years ago
Comment removed
leunaum 2 years ago
Pero esto que es para mejorarlo ?
xxhako 2 years ago
why wud u do this wen u can use a pandora battery
jimmybobson123 3 years ago
jimmybobson123
this modchip was made before the release of pandoras battrey
ptz911 3 years ago
Way before.
00sturm 3 years ago
MUY BUENO
Danimadridista 3 years ago
Will this work on any slim psp motherboard?
Mopy74 3 years ago
No. It'll only work on PSP Phat motherboards earilier than the TA-082 model.
iam7805 3 years ago
Thanks. I'm glad I didn't go through all this. I traded my slim for a modded phat.
Mopy74 3 years ago
This has been flagged as spam show
Bet you regret that now.
RCFLYER83 2 years ago
Comment removed
RCFLYER83 2 years ago
Pero esto que es para mejorarlo ?
bboyhector93 3 years ago
is there one in english??
link002100 5 years ago
The trace exposure and soldering are the most difficult parts. Put the camera on a tri-pod and just shoot at an angle zoomed in. Turn off the camera's auto focus and just dial it in manually.
Why don't you scrape the traces before you stick down the FPC on the mobo like the instructions say?
Wear an ESD wrist strap connected to a conductive mat that you work on, ground the whole setup. The electronics you are handling are very sensitive to ESD, and can be damaged easily.
MonkeyFCoconut 5 years ago
too late
fatcobraman777 4 years ago
Too late to post some constructive feedback and start a discussion? Never. You read my 3 month old comments... even if you don't agree with anything I said, mission accomplished.
MonkeyFCoconut 4 years ago
speaking of 3 month old comments...
Nigga2121 4 years ago
gracias. mu weno
rafaelnuno 5 years ago
Good one ;)
Azurlake 5 years ago