hi john, I'm in need of those thick transparent plastic cover that you used on electrolyser. what do you call it and where can I buy it? I'm located here in CANADA THANKS
I have them made for me... I have to buy a lot to get a price that I can use... I did cut them my self but decided they were not good enough for the people I build my systems for...
john, after some talk with some guys at work we were wondering if you have considered converting your car to run on propane. Once the car is converted then run a hydrogen generator in the place of the propane tank. just a thought.
It is my idea that using the Hydrogen with the gas will give me so many MPG that it would make more sense to stay with the Hydrogen On Demand.. That is unless the price of water goes up..
john, love what your doing. im new to this and am looking at doing this to my truck. unfortunately i have not had a chance to watch all your videos, but like what im seeing. my question is, what is the best solution with the O2 sensor.
I am just getting into that and everyone has something to say about it.. perhaps the best way is a device that fools the sensor by replacing the pulse but the first thing I am going to try is to put a very small voltage <1/10 volt across it to keep it from going low..John AArons
john, after watching many of your videos and experiments i have 2 questions:
1.) first, i was wondering if you have tried adding solutions into the water? You may have already done this, but just wondering. I have heard that a 30% distilled vinegar and 70% distilled water makes an awesome mixture. i have also heard about potasium and sulfur additives that are supposed to make the hydrogen production greatly improve.
I use distilled water and "lye"... so far that has proven the best. Others have told me that White vinegar will work... but the "lye" takes less and is cheep... Thanks for your input...
Nice install John. A word of advice about your electrics though. I originally had my generator circuit going through the main fusebox as you plan to do, but what I found was that when the unit gets hot, the amps rise significantly, you already know this, but it was heating up the fusebox so I decided to build a completely independent circuit for the generator, I didn't like the idea of having to rewire the whole car because of electrical problems. I'm sure you have already thought of this but...
John...Cant wait to see the results...Are you going to be running 12 volts to the generator or using a PWM? And are you going to use any device to alter the oxygen sensor?
I will be using the 12volt system and might put a 2nd or 3rd battery in parallel. As for the PWM I do not believe in it..(at all)unless it is used to bring the voltage down..I will be putting a voltage over the Oxygen sensor (parallel). John AArons
great work john is your car an obd II system if so I can send you schematics to build an adjustable o2 simulator you will need a special one that I have designed it keeps the car from going to open loop mode by simulating the cat o2 sensor and gives you the ability to adjust your mix at the front o2 sensor you will have to test the output voltage of the factory sensors and make adjustment on the sim accordingly I have succesfully used this on my 97 tracker with great success
I am going to try to put a strait voltage across the sensor in par. with the unit so that the computer will see the flux from the sensor but the voltage will not allow the sensor to see the lean mix... (I hope) .. John AArons
Yes this is going to be "real" interesting... There is still a little lab work to do .. heat problems that have to be addressed and a few other problems that I will fix... John AArons
Oh ok if i will find out how to do it on my honda i will let you know keep up the good work thanks
ysh25 3 years ago
Hi great job, How do you override the oxygen sensor in the Honda?
ysh25 3 years ago
I didn't in these tests..
still got about 20% more MPG
John AArons
johnaarons 3 years ago
hi john, I'm in need of those thick transparent plastic cover that you used on electrolyser. what do you call it and where can I buy it? I'm located here in CANADA THANKS
HHOhybridBuilder 3 years ago
I have them made for me... I have to buy a lot to get a price that I can use... I did cut them my self but decided they were not good enough for the people I build my systems for...
John AArons
johnaarons 3 years ago
john, after some talk with some guys at work we were wondering if you have considered converting your car to run on propane. Once the car is converted then run a hydrogen generator in the place of the propane tank. just a thought.
Abar1973 3 years ago
It is my idea that using the Hydrogen with the gas will give me so many MPG that it would make more sense to stay with the Hydrogen On Demand.. That is unless the price of water goes up..
John AArons
johnaarons 3 years ago
john, love what your doing. im new to this and am looking at doing this to my truck. unfortunately i have not had a chance to watch all your videos, but like what im seeing. my question is, what is the best solution with the O2 sensor.
Abar1973 3 years ago
I am just getting into that and everyone has something to say about it.. perhaps the best way is a device that fools the sensor by replacing the pulse but the first thing I am going to try is to put a very small voltage <1/10 volt across it to keep it from going low..John AArons
johnaarons 3 years ago
john, when you finally figure something out can you please let us all know.
Abar1973 3 years ago
John...Any chance you posting on how to construct this device later? Thanks.
moderndaysamson 3 years ago
john, after watching many of your videos and experiments i have 2 questions:
1.) first, i was wondering if you have tried adding solutions into the water? You may have already done this, but just wondering. I have heard that a 30% distilled vinegar and 70% distilled water makes an awesome mixture. i have also heard about potasium and sulfur additives that are supposed to make the hydrogen production greatly improve.
scottieduckfan 4 years ago
I use distilled water and "lye"... so far that has proven the best. Others have told me that White vinegar will work... but the "lye" takes less and is cheep... Thanks for your input...
John AArons
johnaarons 4 years ago
John i reckon you will be innundated with orders, we want to lower the take on the oil companies get from fuel.
Are you going to make it possible to run a car totally on hydrogen?
Zendukai 4 years ago
I have an idea on how to do that... keep watching...but for now it is the gas millage that we must get... and I intend to do that ..
John AArons
johnaarons 4 years ago
Can´t wait to see it up and runnin.
charlie1der 4 years ago
Cant come soon enough for me... John AArons
johnaarons 4 years ago
Man i am excited... congrats and good luck John.
mcburney7 4 years ago
Things are moving... John AArons
johnaarons 4 years ago
I hope you sell these Kits all made up John, once you get it all sorted and it works like a charm, I'll buy one off ya ( as long as u ship to OZ )
I have just seen a car covered in 480 million dollars worth of diamonds, you dont have to guess who and prolly funded that, what a waste of money.
It belongs to one of the top 10 richest men in the world - Kush Al Fayed.
The need is now for us to stop using the precious oil and burning it up, we should be saving some for our future generations.
Zendukai 4 years ago
When the test is done... the "FOCUS" will be sold on my site complete...hydrogen tap dot com.
John AArons
johnaarons 4 years ago
Can't wait :)
amborski07 4 years ago
Now one has been waiting for this as much as me.. John AArons
johnaarons 4 years ago
Nice install John. A word of advice about your electrics though. I originally had my generator circuit going through the main fusebox as you plan to do, but what I found was that when the unit gets hot, the amps rise significantly, you already know this, but it was heating up the fusebox so I decided to build a completely independent circuit for the generator, I didn't like the idea of having to rewire the whole car because of electrical problems. I'm sure you have already thought of this but...
babyella07 4 years ago
That is a great idea... John AArons
johnaarons 4 years ago
John you promised that showing us the output!
About the oxygen sensor...you probably have 2.
One before and after the catalytic conv.
And you can buy some unit that hooks up on them and makes the computer think that it's still on control.
Once I find a really nice dual adjustable unit!
Let me know if you interested I dig at up for you!
petimoritz 4 years ago
Thanks... John AArons
johnaarons 4 years ago
John your handa has two oxygen sensors. The other one is on the exhaust before the catalytic converter.
robdham99 4 years ago
Glad you reminded me... thanks... John AArons
johnaarons 4 years ago
Note, on my Honda accord there are 2 oxygen sensors, one in front as you have in the video and one in the exaughts
marthale7 4 years ago
Ya ... I forgot about it... thanks. John AArons
johnaarons 4 years ago
John...Cant wait to see the results...Are you going to be running 12 volts to the generator or using a PWM? And are you going to use any device to alter the oxygen sensor?
moderndaysamson 4 years ago
I will be using the 12volt system and might put a 2nd or 3rd battery in parallel. As for the PWM I do not believe in it..(at all)unless it is used to bring the voltage down..I will be putting a voltage over the Oxygen sensor (parallel). John AArons
johnaarons 4 years ago
Better to make it work on a older car!
Better challenge John!
Hallaran 4 years ago
The older cars are easy... they use a carb. and with that the Hydrogen goes in without any problem. John AArons
johnaarons 4 years ago
How many mpg's do you think you'll get with this set up? How far away are you from introducing gas free emissions? Nice camera work, thanks.
FrequencyGenerator 4 years ago
I am doing this to prove the concept.. you will see each step of the way and the answer will be there ... John AArons
johnaarons 4 years ago
great work!! i just want you to know how much all of us appreciate your hard work and efforts.
captcaveman4201 4 years ago
Thank you for your interest... the best is yet to come... John AArons
johnaarons 4 years ago
great work john is your car an obd II system if so I can send you schematics to build an adjustable o2 simulator you will need a special one that I have designed it keeps the car from going to open loop mode by simulating the cat o2 sensor and gives you the ability to adjust your mix at the front o2 sensor you will have to test the output voltage of the factory sensors and make adjustment on the sim accordingly I have succesfully used this on my 97 tracker with great success
waynedavisband 4 years ago
I am going to try to put a strait voltage across the sensor in par. with the unit so that the computer will see the flux from the sensor but the voltage will not allow the sensor to see the lean mix... (I hope) .. John AArons
johnaarons 4 years ago
do you have a tripod?
kemptonking 4 years ago
Yes...is the video no good.
John AArons
johnaarons 4 years ago
These pictures are on tripod.
John AArons
johnaarons 4 years ago
Now it gets REAL interesting. My car is to a Honda. Honda Civic Lsi hatch 1.5L of 1992.
Looking forward for the next video. You´ve got a fan of your work John.
Grieverjoao 4 years ago
Yes this is going to be "real" interesting... There is still a little lab work to do .. heat problems that have to be addressed and a few other problems that I will fix... John AArons
johnaarons 4 years ago
Keep watching... John AArons
johnaarons 4 years ago