Anyone having trouble tightening the propeller blades to the hub? I can't seem to be able to get the small crack around each blade to screw all the way in. If I screw it tighter I will be stripping the screw head? Any suggestions would be appreciated.
@xjet Very quiet, too. Thats a sign of a well-designed Propeller. Minimal Slippage, Bladetip-Speeds low-ish, to keep the Vortexs quiet... I film my models while flying, with a Phonecam... Rubber-Banded to the X-mitter. Hold the Box at Arms-Length, full telephoto, & frame as y' fly..! Search 'R/C Asymetric Thrust' to see results. I began doing it for Post Mortems, when teaching m'self to play little Helicopters..! How d' y' get to mix Models & Heavy Metal on 1 Runway ?
He looks very happy with his Trojan , One good thing about living next to Barry is you could turn your stereo up loud and it probably wouldn't bother him . Nice landing there Barry :)
Why does he not get some hearing aids......either that or you could knock him up one of those nice old fashioned 'hearing horns' with you TIG welder Bruce. (A rolled up piece of card would do just a good a job too)!
Great video Bruce, and very nice Trojan T28 there barry, awesome landing too, must be his best to date, look forward to seeing more of the Trojan flying again soon, well done Baazzaa
Well done Barry,you did a first class job there,I'd be quite happy living next door to you,especially if it is in NZ. Good you've got the spring there,it should mean we can expect lots more interesting videos coming during what looks like a miserable autumn here in the UK.
Yeah do a plane of the week with that one and great job to Barry on a good take off and landing plus not for getting the great flight,wise man just to do a few circuits and land, wish i could remember to do that as i some times forget when i maiden a plane,never used to though ;-) thumbs up.
Beautiful looking plane these but you'd think FMS would ditch that long faced pilot they stick in every plane. We round eyes don't really look like that do we?
I have been thinking of getting one of these or the slightly smaller, and much cheaper, Dynam version.
great video... i'm a newbie rc pilot.. been practicing heli's and ultra micro foamies...
just got a parkzone trojan a couple days ago.. it flies great.. no retracts or flaps..
and picked up a focker-wolfe today.. got the parts and electronics set up and assembled, 6ch with retracts and flaps... i'll have it in the air next weekend i hope
@MrINFL8 It was the first-flight so Barry (quite sensibly) didn't do much more than a take-off, a couple of circuits and a landing. He'll be playing with the retracts and flaps soon.
nice. im getting one of these in the next week or two..hope i fly as good as barry for my first flight
localbois 2 days ago
I see you all like to fly American aircraft made in China!? is China the only place they make RC aircraft????? LOL Looks great!
soldier53flyer1 1 month ago in playlist More videos from xjet
Barry, you're an ace! She sure took off like a beauty! Perfect landing too! Great videos Bruce! Keep 'em comin'! Cheers from Vancouver Island!
androsborsato 3 months ago
This has been flagged as spam show
Anyone having trouble tightening the propeller blades to the hub? I can't seem to be able to get the small crack around each blade to screw all the way in. If I screw it tighter I will be stripping the screw head? Any suggestions would be appreciated.
glennissr 3 months ago
great flying barry cool trojan
01silky1 5 months ago
This has been flagged as spam show
@xjet Very quiet, too. Thats a sign of a well-designed Propeller. Minimal Slippage, Bladetip-Speeds low-ish, to keep the Vortexs quiet... I film my models while flying, with a Phonecam... Rubber-Banded to the X-mitter. Hold the Box at Arms-Length, full telephoto, & frame as y' fly..! Search 'R/C Asymetric Thrust' to see results. I began doing it for Post Mortems, when teaching m'self to play little Helicopters..! How d' y' get to mix Models & Heavy Metal on 1 Runway ?
WarblesOnALot 5 months ago
cool stuff
yardtoys2011 5 months ago
sorry Bruce we have the real Paradise over here in the states
no go-carts here at Paradise RC Flyers
bhcnomo 5 months ago
Way to go Barry. What would this channel be with out Barry eh? Great stuff guys .Thanks for posting all the Rc. stuffs. A big hello Frum Canada .
lewandlo 5 months ago
Bruce this is a beauty. But we really really really want to see you fly your T580 30 meters away from you. :D do it mate
alishanmao 5 months ago
At least He's deaf, so he won't he the sinful noise of electric!
32780tit 5 months ago
He looks very happy with his Trojan , One good thing about living next to Barry is you could turn your stereo up loud and it probably wouldn't bother him . Nice landing there Barry :)
3dkat1 5 months ago
He is soooooo deaf!!
Why does he not get some hearing aids......either that or you could knock him up one of those nice old fashioned 'hearing horns' with you TIG welder Bruce. (A rolled up piece of card would do just a good a job too)!
jayc004 5 months ago
I submitted this as the xjet Plane of the week!
3801Catcher 5 months ago
Great video Bruce, and very nice Trojan T28 there barry, awesome landing too, must be his best to date, look forward to seeing more of the Trojan flying again soon, well done Baazzaa
JollySwagman2006 5 months ago
plane of the week!
tcrcclh2 5 months ago
Good job Barry. The plane looks great. I would like to see the T28 as a plane of the week.
williebme63 5 months ago
BARRY, HEY BARRY... GREAT FLIGHT MAN,.... BARRY...BAAAAARRRRRYYYY...GREAT LANDING!!
Bit deaf, that barry dude hey?
BTW, no POTW if you ask me. We seen everything allready, almost....
iTuurke 5 months ago
Well done Bazza great job, your a legend!! And yea do a potw would like to get a look at that prop setup!! looks kinda flashy!!
Crazy3Dpilot 5 months ago
barry nr #1 !!!
octane81 5 months ago
Well done Barry,you did a first class job there,I'd be quite happy living next door to you,especially if it is in NZ. Good you've got the spring there,it should mean we can expect lots more interesting videos coming during what looks like a miserable autumn here in the UK.
drjazzisme 5 months ago
Looks pretty scale for 300 bucks. Nice flying Barry!!
Locoracers 5 months ago
Good on ya Barry nice flight and landing.
dotster35 5 months ago
Yeah do a plane of the week with that one and great job to Barry on a good take off and landing plus not for getting the great flight,wise man just to do a few circuits and land, wish i could remember to do that as i some times forget when i maiden a plane,never used to though ;-) thumbs up.
startazz 5 months ago
POTW yes please :)
steffenl 5 months ago
Go Barry go!!
heinb7 5 months ago
I wish I lived next door to Barry.
kw2798 5 months ago
the ending never gets old. brrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr slam... and then you all laughing.
FlyMario2 5 months ago
Beautiful takeoff Barry considering its the first flight .
jetscreamer100 5 months ago
well done Barry i have one and still not maiden it yet. haven't found my brave pills yet lol.
vfrvtec 5 months ago
I bought the corsair instead of the trojan i think i might have to buy the trojan now. Nice flying barry
mad2248 5 months ago
Very nice but FMS should ditch the crappy looking pilot and i am not talking about Dave ; )
fisherboom 5 months ago
Beautiful looking plane these but you'd think FMS would ditch that long faced pilot they stick in every plane. We round eyes don't really look like that do we?
I have been thinking of getting one of these or the slightly smaller, and much cheaper, Dynam version.
Both seem to fly quite well.
Good first flight Baz.
Yep PLOTW for sure.
bcalv 5 months ago
min volume on computer but music is still too loud!!!!!!!!!!
RCllamadude 5 months ago
FMS has such great looking planes! i want all of them 8)
aDutchy1975 5 months ago
nice work Barry, good lookin plane, good flight as well.
TheFlyinfreak 5 months ago
great video... i'm a newbie rc pilot.. been practicing heli's and ultra micro foamies...
just got a parkzone trojan a couple days ago.. it flies great.. no retracts or flaps..
and picked up a focker-wolfe today.. got the parts and electronics set up and assembled, 6ch with retracts and flaps... i'll have it in the air next weekend i hope
knwl02 5 months ago
I'll tell Barry what a great landing he did.
HEY BARRY, GREAT LANDING MATE!!! NICE PLANE TOO, HEY.
Hope he heard me. ;-)
MrCoyne53 5 months ago 2
I think Barry deserves to have his Trojan as Plane of the Week. FMS hit a homerun with that plane. I would love to have one of my own.
roastedghost 5 months ago
thanks for responding. I am actually just starting to learn now on a kyosho camlato trainer.
MrINFL8 5 months ago
Yes do a Plane of the week on this Great looking & Flying Plane!
splitty77 5 months ago 2
No you should do Pilot of the Week: Barry
vmat377 5 months ago
Three thumbs up, Barry! Nice maiden flight.
kaptainzer0 5 months ago
Walk of fame!
windflags 5 months ago
Nice job Barry and Bruce!
cloudsplitter24 5 months ago
Yes please to the plane of the week treatment for this model, love to see everything it can do as well as flying with the gear up. Nice one!
PeterJBradbury 5 months ago
That's What it's All About!
Congratulations Barry!
poppopscarvinshop 5 months ago
Great landing Barry !!!!
jeffie8696 5 months ago
Great flight and can use it again!
nzqwack 5 months ago
how long since you seen Barry damage a plane while flying it? He will drop the bloody thing trying to hang it from the roof.
48horijoe 5 months ago
Great flight Barry !!!
yftwentytoo 5 months ago
Wow an amzing plane but i did notice that he didn't retract the gear. Why?
MrINFL8 5 months ago
@MrINFL8 It was the first-flight so Barry (quite sensibly) didn't do much more than a take-off, a couple of circuits and a landing. He'll be playing with the retracts and flaps soon.
xjet 5 months ago
@xjet smart
jaygdav 5 months ago