Aluminum Drive Shaft & Short Shifter Installation

[CoryColstockTheOSN]

If I was that car id be like "Why are you taking off my nuts bro?"

[Spartan193069]

im gonna but the hurst short shifter in my 2007 v6 and i was wondering if you need to remove the drive shaft all the way or can i just remove it at the front end and just let it hang down? Because i am not planning on replacing the drive shaft.

[motorztv]

@Spartan193069 It is possible to install the shifter without removing the drive shaft.

[Spartan193069]

@motorztv Thanks so much for the fast reply and the good news!

[S3cK5hun8]

@motorztv what was that red liquid you put on the bolts and stuff called?



[motorztv]

@S3cK5hun8 Loctite

[wonderbreadkw]

whats the best price I can the drive shaft for.?

[wonderbreadkw]

how do you like the tri-ax?

[motorztv]

@wonderbreadkw We love it. In fact we're about to install another one in the grabber orange Mustang!

[mwtort]

I'd gladly let you upgrade my 2011 5.0 and post the vids!

[IrishChris1979]

Another job well done guys! I think it's so nice of you to make these amazing videos for the average non mechanic...Or anyone for that matter. With your help, even I can do these installs. Keep up the good work guys!!

-Chris

[motorztv]

@IrishChris1979 Thanks IrishChris! -Chris

[bsl3216]

@moterztv will those jba shorty headers work on my 08 4.6 f150

[Terreos]

I can assume the drive shaft you installed can be used on an automatic mustang as well?

[motorztv]

@Terreos I would assume so, but it's best to check with the manufacturer of the drive shaft.

[DeeplyMovinU]

You did a No- No.. you should always wear safety glasses when using air tools, especially when removing the driveshaft as there could be bits of rust or metal shavings flying around. But over all a great video and install presentation. Special note* removing the driveshaft isn't necessary for all aftermarket shifters in the S197 2005+ models, but using a Billet style shifter does require the removal of the driveshaft for the Hurst and Steeda models.

[motorztv]

@DeeplyMovinU Thank you for the comment. We were shooting on-location at a friend's shop and forgot a few things. Always highly recommended to wear safety glasses.

[MrCpe9775]

these guys make good install vids. i watch these and just slap on my parts like a pro. mechanics are all rip offs. i had no experience working on my car watched these now i trust me more than anyone. except with body work.

[motorztv]

@MrCpe9775 Thank you very much for the great comment! I've added it to the site :) -Chris

[DukeNukem65]

Great explanation!

[itchylopez]

Good video I just change mine. I have a 2007 mustang gt I put a Hurst short shifter.

[mwp19933]

@itchylopez did you have the problem some others were with vertical lift on the handle when its in neutral? i have heard some horror stories with vibration and whatnot for the 2007 GT's. im nervous about putting it in mine because i dont want to have that problem

[jambajuice26]

@mwp19933

little vib but nothing else, u will like it.

[itchylopez]

@mwp19933

I put about 100 miles and did not have no problem I like it .

[meteoria2009]

Thanks. It's very helpful

[sixstanger00]

On my 2000 V6, the shifter isn't independent from the gearbox; it sticks up and out of the tail of the transmission....how hard is it to install a short throw on mine?

[wccrispy]

Why didn't you go with a carbon fiber driveshaft? PST out of Florida makes them and I'm sure plenty other companies do the same.

[gtrmn355]

Maybe its just the 05's and up. But I didnt have to remove the driveshaft and drop my shifter in my 03 GT. It was all in cab remove and install. I also have the Tri-Ax Shifter, worth every penny.

[motorztv]

@gtrmn355 Sounds like it allows for a much easier install! For the S197 it's required unfortunately!

[TheMcKibbin]

@motorztv not for the roush short throw i didnt have to drop mine at all it was a pain to pull it around the driveshaft but it isnt required

[alpinestar7272]

@gtrmn355 I installed a Hurst Short throw shifter and I didnt have to remove my driveshaft to install the shifter. With a little finesse it fits!

[Berumen85]

dont you need an adjustable upper control arm with that drive shaft?

[dangerdavefreestyle]

an impact gun is not the procedure for removing the flange yoke. a special tool is required for holding it while you remove the nut so you do not damage the transmission or differential when removing it.

[xLilB]

good job bro

[thetvirus]

Why are all of the bolts metric on an American car?

[spiderx1016]

Most or all modern cars these days use Metric.

[R350zz33]

@thetvirus because there not really as American as u think

[WatchoutXP]

You guys came to Vegas?!?

Hit me up the next time you here! lol.

[MeanStang08]

pure sweetness, as always... and much easier to put that shifter in with the shaft out.. i think you need to try it without removing the shaft now! lol man i want one of those Leonard Racing SpyderShaft aluminum drive shafts....

[odisea1261]

perfect works , con super efficenza

[regalgs1997]

nice vid but it would be cool if you could work on a variety of different cars if its possible if not its ok

[eoLHerbie]

awesome episode Chris! keep them coming!

[motorztv]

Thanks! I appreciate you taking the time to watch it!

[eoLHerbie]

btw, is it your mustang?

[motorztv]

No, this is Jason's

[eoLHerbie]

awesome car. are u going to instal a supercharger :D?

[motorztv]

Working on a blower or a turbo...

[powerbook1]

Thanks, another round of good tut video :)

[motorztv]

Thanks for the feedback!

[motorztv]

Bloopers at 9:14 -- don't miss me messing up and being an idiot at the end (tribute to Transformers 2 movie)

[motorztv]

...and "On a boat" from The Lonely Island at 9:31 those are shorty headers LOL

[TheTarrMan]

Isn't it required to balance the drive shaft too, or is that just on older cars?

[motorztv]

Thanks for watching! There's no balancing needed, but I believe it came pre-balanced. If you look at around 0:32 in this episode you can see what I believe is a counter-weight welded onto it.

[rebel4055]

Now I know what I want for my 16th birthday D:

[motorztv]

You have a Mustang at age 16? Luuuuucky!

[rebel4055]

Not yet but I wish :D Im deciding for a truck or car its hard when your choosing your first car

[motorztv]

Good luck... I'm won't drive anything but a truck, personally, but that's because I have more fun building them up than a car. But working on muscle cars are a lot of fun too--squeezing more power out of them like we do on the show!

[coolguy23448]

Lmao your videos are awsome!!!!!

[motorztv]

No, YOU are awesome!!! :) Thanks for the feedback!!

[coolguy23448]

NP!!!!

[21mejia25]

great video

[motorztv]

Thank you!