ehm, mine has been stuck like this for a week? i cant fix it by holding the screen and it says on the program nothing to install, i honestly have looked all over google but cant find anything, im 13 and cant go back to the shop so, iim kind of stuck with it, i can recieve calls and can hear the bbm tone, but i cant fix it by pushing the screen and P, please please someone help?
OMFG IT FUCKING WORKED pressed lock and then pressed the screen pretty hard in the bottom right hand corner and pressed the P key at the same time, then unlocked it and it came back on
HEY guys the solution to this white screen and still we can recieved calls, is to change the screen, for short the screen is broken , mine right now after doing it, its working perfectly fine....
it took me about 70$ for every thing, but the catch is I sent it to my home land for repair in the Philippines, the other good thing about this is the screen was upgraded to a newer version.
I have to take my battery out, put it back in and push my thumbs into the bottom corners really hard and then it works until I lock it again :\ and then it goes back to white screen... at least I can use it when I want to though, but I think the only real, long term solution is to take it in for repairs.
holy shit this actualy worked :s but it goes back to being white after a few minutes... i have to repeat the process everytime i wanna unlock my phone?!
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
thanks so much ; whenever my screen goes white again ijust press p many times and it works i do it quite a lot though but at least it works :D thank you very much <3
I have good news, it's not it's not a hardware problem and no you need any updates. i have {bold 9700} i change the housing and when turn on the phone i got the white screen of death, i looked ever way for a do it yourself with no luck, anyway i then start to take the phone apart with the phone turned on when disconnect flex cord that runs to camera and sd card, the screen working like new. I the reconnect the flex and that was it.. good luck and let me know if this worked for you:)
this is what I did after hours of taking the battery in and out: I put the phone on the floor and stomped on it really hard with my foot about 7 times. Now it works.
thats what i was doing with my black berry, i press the lock button on the top and press the screen on the bottom right and it came back on,,,,, but now its jus bn blank for days bn tryn the same procedure but no luck,,,, to actually take it to the technician is too pricey.... im pissed..
@sophieinbelfast It wasnt working for me either. Make sure its locked and make sure you press p and the screen at the same time. Also make sure its locked, eventually it worked for me.
I have the same problem with my BOLD 9700. It has been normal and suddenly white in 3 ocations, now it is only white but i can still use all the functions, what can I do? :(
if you are ordering a new screen you need to make sure you get the screen code right. there are 3 or 4 different codes ranging from 001/111 to 004/111. mine is 004/111 but a supply company sent me 002/111 and does not work. you will find the code on the reverse of the lcd screen. most supply companies stress that you must get the code correct so im guessing they keep your money and your screwed!
OMG it actually worked, i havnt had my phone for like 4 days and it sucked, i just pressed lock and then pressed the screen pretty hard in the bottom right hand corner and pressed the P key at the same time, then unlocked it and it came back on!!!! thats crazy, but how long is it gonna last? do i have to keep doing that if it goes white again? and its a new phone, i think blackberrys suck! anyway thanks a lot dude i have a phone again!!!
@09jbackshall oh my fucking god, you helped me out sooo fucking much. when i first turned it on, all it had was a complete white screen, even when i was charging it and taking the battery out and putting it back in. when i was looking through on how to fix it, i saw this and tried it repeatedly, and then out of nowhere (after pressing the lock button) it came back on to the original screen and started working again!!! thanks so much dude, you helped me out a whole bunch.
@09jbackshall I tryed downloading loads of different sorftware after accepting that my phone would never work again, and it turned out your trick worked, how my phone works again. Thank you very much
@09jbackshall OMG THANK YOU SOOO MUCH i thought this was one of those like troll shit things like hold her and press her bla bla bla... but it actually worked and i was soooo suprised!!
It's the LCD video data ribbon cable, the insulation gets cut by rubbing on a metal grounding stap located next to the cable and then electrically shorts the cable to ground. I disassembled mine, wrapped the ribbon cable with electrical tape, re-assembled and works fine now. I was getting the white screen of death constantly now it's perfect.
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
@youngzbaron amazing, have been going insane, driving the whole family mad too. So I guess I need a new LDC flex cable? Thanks so much, you have totally made my day
@youngzbaron Eventually it worked, but kept reverting to broken. I had to hold down the screen to keep it working. Then I aimed my thumb a little to the left of the bottom right corner of the screen. Maybe just above where the "escape" or "back arrow" key meets the "end call" key. Now it works and has not gone back to garbled since I did this. I no longer need to hold down on the screen. You have saved my phone (and my wallet), muchas gracias to the original poster!
@youngzbaron the reason why the screen goes white is, when the screen is on, its generates heat creating a loose connection inside.. when the phone is cooled down the screen goes back to normal.. my advise is, take the back off the phone and exposing the battery (whilst on but locked so that the screen is black) and place on a cold glass surface ... either that or expose to a cool fan or general cold air. it is highly annoying. blackberry should fix the problem. hope this helps
Took the phone apart, the connection to the screen was solid.
un-connected it, then reconnected....still the same problem after I put it all back together.
I just ordered a new replacment screen off ebay ($35). I will install it in a couple days and let you know what happens. There was a place in town that would install a new screen for $115..
I know that if I took mine to "telus" they wanted $200 to fix it.
FIRST. SQUEEZE THE DEVICE WITH YOUR 2 FINGERS FROM THE LOCK/UNLOCK KEY AND THE MUTE KEY, IF THE SCREEN FLASHES THEN THE PROBLEM IS WITH THE SCREEN AND IT SHOULD BE REPLACED .
2. IF THE SCREEN DID NOT FLASH THEN THE PROBLEM MIGHT BE WITH THE BATTERY SO JUST HAVE IT REPLACED.
3.ALSO IF THE SCREEN DID NOT FLASH IT COULD BE A SOFTWARE ISSUE SO RELOAD THE OS.
4. IF RELOADING THE OS DID NOT WORK THEN IT MIGHT BE A SHORT FROM DA BOARD SO GO TO A REPAIR SHOP.
Hello, I verified that my 9700 was working thru screeenshots but have the white screen (with no clock), after several tries i discovered a small corto just on the cable from the display, so i places a smal piece of papel between the plain cable and the board... the screen started again to display
...CONT'D....(to below msg). it will not go back normal while screen is on, so you must make adjustments with screen off... then light it up to see if it worked...
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
@nicklia I have the same problem but I found the way to fix it is to twist the phone (sounds weird) but i apply pressure onto the area djroughhouse said and it comes back to life after a few tries. I really can't be bothered to buy a disassembly kit to make the connection again manually.
@djroughhouse oh wow i havent looked at this since I posted! It is true that this is not permanent as i shortly learned after. Ended up replacing the screen with a broken BB from a good friend of mine. IN THE MEAN TIME if you can't get it to work, you can use applications such as Blackberry Master Control Program on your computer when your phone is connected via USB. There is a screen capture tool in there somewhere, and you just perform the navigation on the phone itself. Good Luck!
I checked mine again and it's the flatcable inside of the screen. To check if you blackberry is crashed , you have to use first : BBScreenstream . You can view you blackberry on your pc with just linking the usb into your blackberry to pc.
I've uploaded it specially for you to check and i hope it works for you to. IF your blackberry displays on your PC than you have to replace your blackberry display.
I have send you a message with the link in it, good luck
@Surajproductions i got the bb screen stream and mine is fine like that - i ordered a new screen for mine... gotta buy some opening tools, a mat and anti stati gloves now!!
i have the same T-Mobile Bold 9700 and facing this white screen problem. I dont know how to fix., it. Can anybody help? If the problem solution is available without any surgery???
i have the same exact phone with T-mobile and the same thing happened to me on New Year's Eve...Let me know if you have a solution to this issue otherwise i will get the replacement as i have the insurance.
ehm, mine has been stuck like this for a week? i cant fix it by holding the screen and it says on the program nothing to install, i honestly have looked all over google but cant find anything, im 13 and cant go back to the shop so, iim kind of stuck with it, i can recieve calls and can hear the bbm tone, but i cant fix it by pushing the screen and P, please please someone help?
HighJive5 1 week ago
This has been flagged as spam show
Excellent !!
Vital Electrocomp PCB CONNECTORS, TERMINAL BLOCKS, PCB FUSE HOLDERS, VITAL CONNECTOR, SCREW TYPE TERMINAL BLOCK, PUSH FIX CONNECTOR, COMBICON, PLUGGABLE CONNECTOR, PLUGGABLE TERMINAL BLOCK, BARRIER TERMINALS
Google Vital Connectors
VitalElectrocomp 1 week ago
just stomped on mine 7 times and it worked, woah
berrylucy7 1 week ago
@berrylucy7 I also did that, but now the screen's white with some black ink running behind the glass. What's wrong with this thing!!?
MegaNabeelo 1 week ago
This has been flagged as spam show
OMFG IT FUCKING WORKED pressed lock and then pressed the screen pretty hard in the bottom right hand corner and pressed the P key at the same time, then unlocked it and it came back on
drkangel0905 2 weeks ago
i tried it, and now its white, and half pink?
1Amey03 2 weeks ago
watch?v=b6eeV17Ux4c&feature=related
AtmosFEARical 2 weeks ago
you have to buy a new screen nd fix it myn for now is hite screen nd im soo mad i have to buy a new screen nd repair
yousufl4d2000 1 month ago
HEY guys the solution to this white screen and still we can recieved calls, is to change the screen, for short the screen is broken , mine right now after doing it, its working perfectly fine....
ferozakig 1 month ago
it took me about 70$ for every thing, but the catch is I sent it to my home land for repair in the Philippines, the other good thing about this is the screen was upgraded to a newer version.
ferozakig 1 month ago
Connect it to the blackberry desktop software and sync it, also add some new software. That Just worked for me!
missprincessdees 1 month ago
i slammed my phone on a semi hard surface 5x and it worked a treat
joshuak111 1 month ago
@joshuak111 hahaha it worked for me to
MaudMathildeDavine 1 month ago
I have to take my battery out, put it back in and push my thumbs into the bottom corners really hard and then it works until I lock it again :\ and then it goes back to white screen... at least I can use it when I want to though, but I think the only real, long term solution is to take it in for repairs.
JadeeHughes 1 month ago
that is bottom corners of the screen*
JadeeHughes 1 month ago
same happen to my cp, sent for repair, it was the lcd assembly they said, change it ,its working now
ferozakig 2 months ago
@ferozakig how much did that cost for the repair?
beaden1 1 month ago
mine loads up and everything but then goes white then says error anyone help me?
mheels69 2 months ago
holy shit this actualy worked :s but it goes back to being white after a few minutes... i have to repeat the process everytime i wanna unlock my phone?!
muhannad1988 2 months ago
This has been flagged as spam show
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
TwiinStar1224 2 months ago
I'M DIEING WITHOUT MY BLACKBERRY AND NOTHING IS WORKING. any other solutions?
iwouldsingwithyou 2 months ago
My blackberry 9780 has the same problem I tried the p trick it worked for like 4 seconds then it went back to being white
It costs about 70 dollars to fix
epic1A6 2 months ago
@youngzbaron
thanks so much ; whenever my screen goes white again ijust press p many times and it works i do it quite a lot though but at least it works :D thank you very much <3
BOSSsolss 2 months ago
what do i need to do please somebody help meeeeeee!!!
TommYxNLx 2 months ago
What is it I do? My screens been white for like 2 days now.. So frustrating! Hellpppp???
weehotlipsx 2 months ago
Yep, solved my issue too. WTF?? Thanks dude, I was about to reload the OS!
The1Metallian 3 months ago
Maestro..it works!!
chinmayprajakta 3 months ago
dude i have to get a fucking new screen 80 EURO wtf bro
TheKookiemonster007 3 months ago
I have good news, it's not it's not a hardware problem and no you need any updates. i have {bold 9700} i change the housing and when turn on the phone i got the white screen of death, i looked ever way for a do it yourself with no luck, anyway i then start to take the phone apart with the phone turned on when disconnect flex cord that runs to camera and sd card, the screen working like new. I the reconnect the flex and that was it.. good luck and let me know if this worked for you:)
gtyouth7 3 months ago
this is what I did after hours of taking the battery in and out: I put the phone on the floor and stomped on it really hard with my foot about 7 times. Now it works.
xXxHunnyxXx 3 months ago 9
@xXxHunnyxXx
No kidding, tried the "nice way" didn't work. Put the sucka on the ground and gave it 2 good stomps and voila back in action. Thanks!
mikefrey123 3 months ago
@xXxHunnyxXx That's what we should do with RIM's Designer in Chief :)
WildMaverick1200 1 month ago
I tried it too..I honestly didnt think that was gonna work! thanksss :)
tonitonks 3 months ago
thats what i was doing with my black berry, i press the lock button on the top and press the screen on the bottom right and it came back on,,,,, but now its jus bn blank for days bn tryn the same procedure but no luck,,,, to actually take it to the technician is too pricey.... im pissed..
shanex1984 3 months ago
the P thing didn't work for me, how hard do you have to press the screen?
sophieinbelfast 3 months ago
@sophieinbelfast It wasnt working for me either. Make sure its locked and make sure you press p and the screen at the same time. Also make sure its locked, eventually it worked for me.
alucard654321 3 months ago
I have the same problem with my BOLD 9700. It has been normal and suddenly white in 3 ocations, now it is only white but i can still use all the functions, what can I do? :(
oreja319 3 months ago
OMG DAYNAAAAAAAAAAAAAAAAAAAAAAAAAAAA
staywavey1 3 months ago
Bomboclaaat ! :O , It work ! :D
cheesebreadful 4 months ago
some one help me plz.. my bb 9780 just got a white screen.. i dont knwo what to do..
someone pleas help me.. plzzz
danial0021 4 months ago
your the man
dabossman1231 4 months ago
OMFG! THANK YOU
DOODOO1O8 4 months ago
How do you do it :'( Please help.
BellaBodeanMonroe 4 months ago
OH MY FUCKIN GOD THE P TRICK WORKED THANKS DUDE
coke11256 4 months ago
the P and end trick realllllly worked!!!!!!!!
HITMOBMUSIC 4 months ago
Great job guys just fixed my 9780
SuperAga24 4 months ago
mine dosent lock or do anything
imgingerindenial 4 months ago
if you are ordering a new screen you need to make sure you get the screen code right. there are 3 or 4 different codes ranging from 001/111 to 004/111. mine is 004/111 but a supply company sent me 002/111 and does not work. you will find the code on the reverse of the lcd screen. most supply companies stress that you must get the code correct so im guessing they keep your money and your screwed!
busoperator 4 months ago
@djroughhouse I need help it didn't work for me
agentballin24 4 months ago
THANKS TO @djroughhouse my phone finally works!!
7abetein 4 months ago
OMG it actually worked, i havnt had my phone for like 4 days and it sucked, i just pressed lock and then pressed the screen pretty hard in the bottom right hand corner and pressed the P key at the same time, then unlocked it and it came back on!!!! thats crazy, but how long is it gonna last? do i have to keep doing that if it goes white again? and its a new phone, i think blackberrys suck! anyway thanks a lot dude i have a phone again!!!
09jbackshall 4 months ago 22
@09jbackshall your my hero
craigk195 2 months ago
@09jbackshall wow thanks a lot dude, i tried it on my bb and it actually worked :D
lolzmanzer 2 months ago
@09jbackshall temp fix, but works none the less
LucyRockprincess 4 weeks ago
@09jbackshall ooh man, THANKYOU ! now that's trick help me for emergency i always press the screen when BBM-ing. THX a lot,,
Liberaltedjo 2 weeks ago
@09jbackshall oh my fucking god, you helped me out sooo fucking much. when i first turned it on, all it had was a complete white screen, even when i was charging it and taking the battery out and putting it back in. when i was looking through on how to fix it, i saw this and tried it repeatedly, and then out of nowhere (after pressing the lock button) it came back on to the original screen and started working again!!! thanks so much dude, you helped me out a whole bunch.
tehpuddness 1 week ago
@tehpuddness yo nick what up
CriticaLxBombeR 1 week ago
@09jbackshall I tryed downloading loads of different sorftware after accepting that my phone would never work again, and it turned out your trick worked, how my phone works again. Thank you very much
austinmiller22 1 week ago
@09jbackshall OMG THANK YOU SOOO MUCH i thought this was one of those like troll shit things like hold her and press her bla bla bla... but it actually worked and i was soooo suprised!!
24lugassy 5 days ago
Thanks a lot, it worked for me!
jm2dev 4 months ago
I need help I tried reinstalling the os that didn't work and I tried pressing on the screen and pressing p but that doesn't work plz help
agentballin24 4 months ago
How do u fix. It
dan12345307 4 months ago
where u able to fix this problem?
quillatequilla 4 months ago
djroughhouse genius. thanks.
isabellesee93 5 months ago
Wow my sons 9700 had white screen
I done the phone twist and it worked 1st time
Bloody amazing
Cheers to the man who knew about the twist
srs68 5 months ago
worked for me. Pretty impressive
LilMissJucieCouture 5 months ago
THANKS A LOT, I DIT IT AND IT SOLVE MY PROBLEMS
wagnerescanio 5 months ago
@djroughhouse plz tell me how to fix it plz
Trendzavelli5 5 months ago
my screen broke also just like ur how do i fix it msg me plz!!!
hawaiianb601 5 months ago
@djroughhouse it not working for me
agentballin24 5 months ago
fucccck it worked for a couple days now it goes white again and djroughhouse's instructions doesnt work no more :(
TmacRaptors 5 months ago
@djroughhouse .....Amazing, my 9700 is back up and running perfectly. thanks for the assist, try it out people it really works.
xcaliberseun 6 months ago
@djroughhouse wow fair play it works! not for long tho
iSkiillzHD 6 months ago
It's the LCD video data ribbon cable, the insulation gets cut by rubbing on a metal grounding stap located next to the cable and then electrically shorts the cable to ground. I disassembled mine, wrapped the ribbon cable with electrical tape, re-assembled and works fine now. I was getting the white screen of death constantly now it's perfect.
4sp33d 6 months ago
@4sp33d My 9780 does it.. first day or so, i use to "slap" my blackberry..
i am gonna buy the opening tools and try and see if i can fix it..
moment its fixed, its getting sold! lmao
apmirkin 6 months ago
@4sp33d I'm going to try this in the weekend and post my results
rgomez14 6 months ago
Great advise ,this worked for me aswell.
Many thanks
Tellall
tellallable 6 months ago
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
youngzbaron 6 months ago 17
@youngzbaron amazing, have been going insane, driving the whole family mad too. So I guess I need a new LDC flex cable? Thanks so much, you have totally made my day
helenafrithpowell 4 months ago
@youngzbaron Thank you dude your awsome!
Do you know how i fix this problem for ever
YoSuckazz 3 months ago
@youngzbaron thanks man!! your a total legend!! saved my life!!
TheRadarProject 3 months ago
@youngzbaron Eventually it worked, but kept reverting to broken. I had to hold down the screen to keep it working. Then I aimed my thumb a little to the left of the bottom right corner of the screen. Maybe just above where the "escape" or "back arrow" key meets the "end call" key. Now it works and has not gone back to garbled since I did this. I no longer need to hold down on the screen. You have saved my phone (and my wallet), muchas gracias to the original poster!
knolan101 3 months ago
@youngzbaron thank you so much
VJB47 3 months ago
@youngzbaron ohhhmyyygodddddd thank you SO. much IT WORKED!!!!!
giogingquatro 3 months ago
@youngzbaron holy shit it worked lol thanks man
lambofpaul 3 months ago
@youngzbaron holy shit i tried this and it WORKED!!! ahahha thanks a lot man
daradubb 2 months ago
@youngzbaron the reason why the screen goes white is, when the screen is on, its generates heat creating a loose connection inside.. when the phone is cooled down the screen goes back to normal.. my advise is, take the back off the phone and exposing the battery (whilst on but locked so that the screen is black) and place on a cold glass surface ... either that or expose to a cool fan or general cold air. it is highly annoying. blackberry should fix the problem. hope this helps
chloefinnan 2 months ago
It needs a new LCD.........
jacksells 6 months ago
huhuh :'( same problem please help me to fix my blackberri :( add me on my facebook account. preciouzrock@yahoo.com thanks :'(
lykatut 6 months ago
did it work?
fsnyder350 7 months ago
Have the same issue.
Took the phone apart, the connection to the screen was solid.
un-connected it, then reconnected....still the same problem after I put it all back together.
I just ordered a new replacment screen off ebay ($35). I will install it in a couple days and let you know what happens. There was a place in town that would install a new screen for $115..
I know that if I took mine to "telus" they wanted $200 to fix it.
utubesarkaz 7 months ago
@utubesarkaz did it work?
fsnyder350 7 months ago
@fsnyder350 Still waiting for the screen to be delivered....I am hoping this week.
utubesarkaz 7 months ago
@utubesarkaz ayy do youlive in montreal? and was your screen broken? because mine just turned white and i still recieve my messages and all that
thuglaydiez 2 months ago
thats amazinggg.. it worksss!!!!!!!!
cr8zyben 7 months ago
make a video showinn hwo to do??? its not workin for me
killerdate8 7 months ago
it works! YOu're great!
Pastador1971 7 months ago
However... My screen is still lagging and glitching.
Jokes4Weekz 7 months ago
@Jokes4Weekz ... But it's not white anymore.
Jokes4Weekz 7 months ago
it works! :o i'm surprised as heck.
Jokes4Weekz 7 months ago
THANK YOU!
maceoremy 7 months ago
omg djroughhouse thanx this helped!!!
youconr 7 months ago
@djroughhouse ur a fuckin legend bruv my phones bin like dis for 2 days now !! and wot u sed to do totaly works , nice 1
200gregg 8 months ago
THERE ARE 4 CAUSES TO THIS PROBLEM
FIRST. SQUEEZE THE DEVICE WITH YOUR 2 FINGERS FROM THE LOCK/UNLOCK KEY AND THE MUTE KEY, IF THE SCREEN FLASHES THEN THE PROBLEM IS WITH THE SCREEN AND IT SHOULD BE REPLACED .
2. IF THE SCREEN DID NOT FLASH THEN THE PROBLEM MIGHT BE WITH THE BATTERY SO JUST HAVE IT REPLACED.
3.ALSO IF THE SCREEN DID NOT FLASH IT COULD BE A SOFTWARE ISSUE SO RELOAD THE OS.
4. IF RELOADING THE OS DID NOT WORK THEN IT MIGHT BE A SHORT FROM DA BOARD SO GO TO A REPAIR SHOP.
185mohammed 8 months ago
Nice one, worked for me on my daughters phone
Baggietait 8 months ago
Hello, I verified that my 9700 was working thru screeenshots but have the white screen (with no clock), after several tries i discovered a small corto just on the cable from the display, so i places a smal piece of papel between the plain cable and the board... the screen started again to display
Carlos
drmorbo29 8 months ago
yes you need a new screen.
andymaxigawa 9 months ago
...CONT'D....(to below msg). it will not go back normal while screen is on, so you must make adjustments with screen off... then light it up to see if it worked...
djroughhouse 9 months ago
I have this issue. Its an issue with the connector where the LCD flex cable meets the motherboard. This is located approximately where the 'end call' button is. When mine goes white, i press the top key lock so the screen goes off, then i press down the screen right above 'end call', and the letter 'P', in hopes of wiggling the connector in the phone, can take several tries, after each press take keylock off to try and see if screen is back to normal. dont press end call as it lights screen.
djroughhouse 9 months ago 62
@djroughhouse did this really work for anyone else? because i dont know if im doing it right lol
nicklia 8 months ago 4
@nicklia Just worked for me today. Brilliant. Still going to dismantle it at the weekend though.
TheLOKI1981 8 months ago
@nicklia, yea it does, just tried it after i had the white screen last night. But after sometime it goes back
thads045 7 months ago
@nicklia it worked for me! thanks
Dillydude19 6 months ago
@nicklia I just had this problem happen to me just now. I did try it and it worked. it took a few times to try this method.
yankfan88 5 months ago
This has been flagged as spam show
@nicklia I just had this problem happen to me just now. I did try it and it worked. it took a few times to try this method.
yankfan88 5 months ago
@nicklia I have the same problem but I found the way to fix it is to twist the phone (sounds weird) but i apply pressure onto the area djroughhouse said and it comes back to life after a few tries. I really can't be bothered to buy a disassembly kit to make the connection again manually.
xChaMy 5 months ago
@xChaMy what do you mean by twisting it?
TooSlick403 5 months ago
@djroughhouse nice one mate!!!
Bladewalkthroughs 8 months ago
@djroughhouse WTF it worked for me thx man, however it only lasts 2-3 min not longer lol! i think i should change the wires or whatever!
V1TAM1NUtkurchik 8 months ago
@djroughhouse THANK YOU SO MUCH
familyguy410 7 months ago
@djroughhouse wow, it worked for a brief moment and just went back off
thads045 7 months ago
@djroughhouse this works, but i recommend using this only if u can get a screen replacement, cause after a little bit it comes back.
MatthewPrinceTran 6 months ago
@djroughhouse thank you for the advice it worked
meatz89 6 months ago
@djroughhouse mine did go back then it went white again plz help!!
xxxburnham 6 months ago
@djroughhouse mine did go back then it went white again plz help!!
xxxburnham 6 months ago
@djroughhouse YOU ARE A FUCKING GENIUS!!! I LOVE YOU!!!!
heartsNbowties 5 months ago
@djroughhouse I DONT KNOW HOW U KNOW THAT BUT IT WORKED!!!!!!!!! OMG MAN UR SOOOOO SMART NO SARCASM!!!!!!!!!!!!!!!!!!!!!! HE ISNT LIEING
paredes654 5 months ago
@djroughhouse It works but only if i hold it down
TECH4567 5 months ago
@djroughhouse I did this all the time. It worked, but now it doesnt work anymore!!!!!!!!! HELP!
JayeDeLlupar 5 months ago
@djroughhouse I LOVE YOU OMFGG THANK YOU
MDnJsVideoGame411 5 months ago
@djroughhouse DUDE THANKS A LOOOOOT MY BLACKBERRY IS NOW FIXED!!!!!!!! THANKS SO MUCH!!!!!
mangekyourynengan 4 months ago
@djroughhouse PLEASE PLEASE HELP ME!!!! PRESS DOWN ON THE P BUTTON TOO?!
lexa724 4 months ago
@djroughhouse thnx
MoodzBlog 4 months ago
@djroughhouse oh wow i havent looked at this since I posted! It is true that this is not permanent as i shortly learned after. Ended up replacing the screen with a broken BB from a good friend of mine. IN THE MEAN TIME if you can't get it to work, you can use applications such as Blackberry Master Control Program on your computer when your phone is connected via USB. There is a screen capture tool in there somewhere, and you just perform the navigation on the phone itself. Good Luck!
djroughhouse 4 months ago
@djroughhouse You are a genius!!
TheYlipily 2 months ago
@djroughhouse didnt wrk for mi
kewwi11 4 months ago in playlist blackberry repair
@djroughhouse Thank you so much ! best comment ever! :)
wallsballs12345678 4 months ago
@djroughhouse omg your a life saver! <3
vizzlebaby07 4 months ago
@djroughhouse thank u so much, it helped a lot :)
amdol13 4 months ago
just take the batery out the back and put it back in and turn it on! it worked in my blackberry!!! whew!!!
hontos12 9 months ago
I checked mine again and it's the flatcable inside of the screen. To check if you blackberry is crashed , you have to use first : BBScreenstream . You can view you blackberry on your pc with just linking the usb into your blackberry to pc.
I've uploaded it specially for you to check and i hope it works for you to. IF your blackberry displays on your PC than you have to replace your blackberry display.
I have send you a message with the link in it, good luck
Surajproductions 10 months ago
Here's the link:
just go to megaupload and put behind the link : ?d=L8O6TJNM
Surajproductions 10 months ago
@Surajproductions i got the bb screen stream and mine is fine like that - i ordered a new screen for mine... gotta buy some opening tools, a mat and anti stati gloves now!!
this may be my firt and last blackberry!
I am really unhappy! :(
apmirkin 6 months ago
i've got it to with my NEW screen and it doesn't show:o theres probly a problem with the flat cable inside
Surajproductions 10 months ago
my shit did it too and i got the at&t version. how can u fix it
vegasvicc 10 months ago
i have the same T-Mobile Bold 9700 and facing this white screen problem. I dont know how to fix., it. Can anybody help? If the problem solution is available without any surgery???
databasecenter 10 months ago
WHITE SCREEN OF DEATH NOOO! ALT SHIFT DELETE
TyanaAlex 1 year ago
hey that's the thing happen to me girl friend n i change her battery n it works as new.
chrisluv100 1 year ago
Hello, if you are a bit handy wit opening things then you should do this
Go on ebay and buy an new blackberry bold 9700 screen!
Then go to youtube and search for raplacing blackberry bold 9700 LCD
do the exact same thing and it should be working again!
it worked for me!
grts
tomsmit15 1 year ago
i have the same exact phone with T-mobile and the same thing happened to me on New Year's Eve...Let me know if you have a solution to this issue otherwise i will get the replacement as i have the insurance.
MrStinkpuss 1 year ago