HBK3 How to replace feathering bar

[bigcountryforever]

ive changed about 10 of these,i take one nut off and put it on the new shaft and push the old shaft out with the new one,a bit fiddley, but it saves the tears when theres bits all over the shop.

[boooooyzzz]

Will it be safe if i just unbent a bent feathering bar ???

[alishanmao]

@boooooyzzz it is possible. I have done that but some times if there is a tiny bend, you will have tough times to track the blades.

[boooooyzzz]

@alishanmao Plus , will the feathering bar break during flight ? Thanks :)

[alishanmao]

@boooooyzzz they do not break

[Snipethebullet]

So sad I couldn't get my HBK3 to lift so I bought a Belt CP V2. I guess im gonna use my HBK3 to learn the various parts on a rc heli.

[xXMiracleManXxVideos]

@Snipethebullet Same thing happened to mine! now im not going to spend anymore money on it. I will sell it on ebay,

[xXMiracleManXxVideos]

my fly bar is as bent as yours probably worse lol.

[xXMiracleManXxVideos]

@Drota90 Adjust your blades.

[Drota90]

Ali is the best

[xXMiracleManXxVideos]

hey this is MW2Gameplayseries. Why did you block me?!?! I just needed some help dude.

[alishanmao]

I believe you were blocked accidentally. As I block lots of idiots who post humiliating comments on my channel. I have unblocked you. and sorry for inconvenience mate :)

[xXMiracleManXxVideos]

its ok.

[Snipethebullet]

Hey thanks for the advice Ali and MW2, I guess I'm gonna have to use force to get the flybar out somehow. Just started like 5 days ago so I gotta get use to these things. BTW awesome main gear repair vid!

[alishanmao]

Welcome my man. yes May the force be with you :D

[Snipethebullet]

How do you take out the flybar completely if its too bent? I can't figure it out.

[MW2GameplaySeries]

@Snipethebullet my feathering bar is really bent like shit. I'll make a vid tomorrow. lol

[alishanmao]

lol, how did you do that :) would love to see.

[alishanmao]

there are two hex head screws, hard to see due to black color on to those little black arms that are holding flybar. loosen them. get one flybar pedal out and pull the other pedal to get flybar out. but it won't come out easy if its bent lol

[MW2GameplaySeries]

lol nuts

[dgoakes]

hey ali. can you make a vid or give me the name of a vid on adjusting main rotor blades? you know when one is higher or lower than the other, the manual doesn't give very good instruction. thanks.

[alishanmao]

Hmm I will do a blade tracking video when i have time. for now on you can try to find Finless bob and his tutorial at helifreak com

[MrXpiderman]

ali, my friend gave me his broken HBK3 and i think i can't repair this one from a very bad crash( total wrecked) ..lmao:)) so do you think can i use the transmitter and receiver to make an rc foam planes? servos and motor also survived. more videos ali..thanks;))

[alishanmao]

Yes you can :) hehehe that will be awesome

[maccanaut]

Interesting to see you BEND your flybar back into shape rather than replace it. Being one of the more expensive commonly damaged parts, i've spent a small fortune on that little beasty bar. I thought that if the flybar is bent even the slightest bit, it HAD to be replaced. I'll be looking at doing the Uri Geller thing next time instead of forking out $7.00 AUD everytime. Thanks again Alishanmao!

[alishanmao]

LOL mate, I have done it 100 times and its always good :)

[mYfLASK]

Once again an excellent tutorial you enplane very well. I always look forward to your videos.

[diasyuri]

Fraco, poor, faible

[popcornreviews]

nice, but that fly bar looks a bit bent lol

[alishanmao]

yeah i agree. I did it again after the video :D

[gbgordonblake]

these videos are a great resource could you please do one on installing the esky HBK3 metal upgrade?

[u111fo]

Nice tutorial! :)

[alishanmao]

Thank you :)