thank you very much I rebuilt the carburetor and the chainsaw works great. I pumped it five times for the prime and I pulled it two times on the rope and it started. I think it was the pump in the carburetor which was bad. I did not fool with the Jets left them at the settings. Now I can got o trim my tree this whole experience is only $15 and I thank you very much
Awesome !! I had great success rebuilding mine, due to this Vid.. The only thing that I made a mistake on was putting the diaphragm gasket on after the diaphragm (which made more sence to me) .. But watching your video a second time got things arranged the way that they should be.. With the way that I installed the gasket the first time the saw wouldn't draw fuel on its own.. With a simple reverse as shown correctly in your video my saw started with much enthusiasm and runs great !!
Richpin ,when doing a fuel pressure test and u lose a significant amount of psi with key on at the fuel rail, that is a indication of a leaking injector or bad fuel pump? My specs are 48 psi at fuel rail and only getting 42 whith a bleed down of 3 psi in less then two mins
I've a few 2stroke engines and you've given a good guide to rebuild carb if the need should arise thanks mate for the time and effort to share your knowledge with others
sorry, forgot to add. I think 5 turns out is way too rich. the WT manual for walbro states the initial adjustment should be 1 & 1/4 turn to 2 turns max
I was hoping you would have done the welsch plug... Not sure about the saw (didn't see that video) maybe there was some passages plugged under that welsch plug???
Man that carb. would look good on a 350 small block chevy engine.HAHAHAHHA!!! no really nice video, Mr. jack of all trades..and thanks for the info on where to purchase the kits at really appreciate it...
thank you very much I rebuilt the carburetor and the chainsaw works great. I pumped it five times for the prime and I pulled it two times on the rope and it started. I think it was the pump in the carburetor which was bad. I did not fool with the Jets left them at the settings. Now I can got o trim my tree this whole experience is only $15 and I thank you very much
polewalker 1 week ago
@polewalker Glad it worked out for you.
richpin06a 1 week ago
Awesome !! I had great success rebuilding mine, due to this Vid.. The only thing that I made a mistake on was putting the diaphragm gasket on after the diaphragm (which made more sence to me) .. But watching your video a second time got things arranged the way that they should be.. With the way that I installed the gasket the first time the saw wouldn't draw fuel on its own.. With a simple reverse as shown correctly in your video my saw started with much enthusiasm and runs great !!
Thanks
Vdubin64bug 3 weeks ago
Richpin ,when doing a fuel pressure test and u lose a significant amount of psi with key on at the fuel rail, that is a indication of a leaking injector or bad fuel pump? My specs are 48 psi at fuel rail and only getting 42 whith a bleed down of 3 psi in less then two mins
fivefortyeye540i 2 months ago
I've a few 2stroke engines and you've given a good guide to rebuild carb if the need should arise thanks mate for the time and effort to share your knowledge with others
Carlostype 2 months ago
Rich, if there was ever a massive failure of society- like a nuclear war- I would want to keep you around. You can fix nearly anything!
bhstone1 2 months ago
Rich, I didn't think yoiu were going to give up on that old chainsaw from the earlier vid. Nice try to save it..
ItsAlwaysRusty 2 months ago
@ItsAlwaysRusty I gave up on it and brought a Poulan Pro.Anyone that wants the Walbro carb can have it.
richpin06a 2 months ago
Happy Chanukkah!
bhstone1 2 months ago
@bhstone1 But i'm not Jewish
richpin06a 2 months ago
@richpin06a Oh, well, not everyone is perfect!
bhstone1 2 months ago
is there a egr cooler on my sc2
ThebigHurtt 2 months ago
@ThebigHurtt Nope
richpin06a 2 months ago
Rich your videos are so therapeutic. Your have been our teacher for a long while and we are lucky to have you. Thank you and have a merry christmas!
hayes429 2 months ago
@hayes429 I hope you and your love ones have a merry Christmas.
richpin06a 2 months ago
sorry, forgot to add. I think 5 turns out is way too rich. the WT manual for walbro states the initial adjustment should be 1 & 1/4 turn to 2 turns max
seasonedtoker 2 months ago
Nice clear review as always. Thanks for the mowers4u tip!
Gizmopflege 2 months ago
I was hoping you would have done the welsch plug... Not sure about the saw (didn't see that video) maybe there was some passages plugged under that welsch plug???
Grizzlee7200 2 months ago
The base gasket is $395.12, plus $27.12 shipping, LOL.
VMATT500C 2 months ago
been watching this guy since i owned my 97 saturn sc2he help me alot
elmoisback 2 months ago
Rich, Is this the carb off of the chainsaw from the cleaning video you did just recenty?
Edward681 2 months ago
@Edward681 Yes it is.Update:just got done adjusting it on the saw and it is no better then before.Update plus 1:I brought a new saw.
richpin06a 2 months ago
@richpin06a what's the problem? no starting or surging? did you check the crankcase for any leaks?
seasonedtoker 2 months ago
@seasonedtoker Ya both starting and surging
richpin06a 2 months ago
@richpin06a
did you check the cranck seals ?
a 2 stroke impossible to tune is very often caused by air sucked by cranck seals.
michaelovitch 2 months ago
Man that carb. would look good on a 350 small block chevy engine.HAHAHAHHA!!! no really nice video, Mr. jack of all trades..and thanks for the info on where to purchase the kits at really appreciate it...
CHIBA280CRV 2 months ago