(HOAX) Part III: Mylow's Magnet Motor Running with Bar Magnets

[DougWulfram]

Why does he not show it powering up a generator to make power to get a light going or something like that? I have watched a few of his videos and he keeps saying and doing the same thing. Attach a generator to it and make it power something.

[NANOELMAGO]

COMO ES POSIBLE QUE TANTA GENTE NO ENTIENDA QUE ES Y COMO FUNCIONA UN IMAN?

[sparkyrocky12131963]

the real scammer here is mr. sterling. selling the the plans

with out the consent of mylow. the mib story is nothing but a

false story to make it look believable.

Trust me i know i am mylows brother i made the rotor plate

and bearing assembly.

i told mylow to fake all his motors after 10-12-2009

even in the videos with me

mr sterling is vulture praying on unsuspecting inventers.

opensourceing is a scam made by stering and who knows what other.entities

[guitaryoder1]

Why does he babble about nothing? Why cant he tell us how it works? Why have all the thousands of scientist in the world never been able to put some magnets on a wheel?

[guitaryoder1]

Who gives a fuck whats in the dresser, show us whats under the wheel? Anybody with a 7th grade education knows that magnets on a wheel do not make energy.

[perceptionsevrything]

why dose it say hoax? i don't get it, i wonder why people say it's fake?? just kidding

keep up the good work and F the haters.

All though it's not their fault, and you can't really blame them. They are just kept ignorant and purposely miss-educated by the money/power hungry fear-mongrels that run this physical world.

[TheGanimides]

ME PARECE REAL.......CREO QUE TIENE QUE VER CON EL CONTRAPESO Y EL ESPACIO PARA DAR PASO A LA OTRA FILA DE IMANES...................MMMMM­MM

INTERESANTE.................SE DEBERIA HACER ESTO A ESCALA MAYOR.

[Iritas1985]

I think this is not a hoax, it is a prank, intended to show how gullible people are if it comes to free energy and i think it was a really good prank ^^

[transfusablepng]

Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!

[shark9000jongson]

Спасибо! ))))))))) я удивлен))) thank you Mylow))

[n3xup]

Nice trick. Why don't you try to add a belt and connect it to a generator to try and prove that this generates actual power? You're right, I don't think humanity is ready for this desk-top toy.

[digitalenigma00]

he sounds like a crack head in denial when he says hes gona stop it and take this thing apart ect.. lmao

[janica63]

Ha ha ha It is a scam!... :)

[Mr12345678901212]

does it really work? and how?

[MueraTelevisa]

If this is real would be beautiful, can you do some thing for proof it's real?

[falinx101]

I don't get why people think this is fake. He never made a cent from it, he never patented anything, I don't exactly see chicks lining up outside his door to bang him. What possible motive could he have for faking it?

[PESNetwork]

@falinx101 We have documented the evidence that this was faked. As for his motivations, guessing is all we can do. Part of it might be part of a syndrome to measure up to his identical twin brother who has a college degree in engineering. Part of it could be a Don Quixote personality. I can confirm he wasn't in it for the money. -- Sterling

[falinx101]

@PESNetwork yeah I see what you mean I started looking closely at his videos and I can see it's a joke. Maybe him and his brother are both deluded, who knows. I was really hoping this would pan out though. Back to harnessing aether idea, if only I had the brains, time and cash reserves to build a mini romag combined with a half size light box to prove overunity truely does exist.... *sigh*

[VojvodinaNet]

@PESNetwork I have checked your "evidence" where you insult him saying that he has "low IQ". If anyone is fake - you are. This simple machine is based of inertia which is not completely explained in science. There is no surprise here, such a machine is possible in many different ways, but you people are here to stop anyone from getting such ideas...what is exactly fake in this video?

[ahamatmabrahman]

@falinx101 I think these sites are crawling with shills who can only do their work by being in denial i think its called stockholm syndrome

[ilyas61967]

I dont belive it how it starts spinning looks like it gets power addet like magnetfields bij electromagnet behind the wall or maybe on the bottom of the lamp is built in electro magnet. dont make vid in a dark room show everything every corner maybe in a room moore light and outlined table no electrical devices around then i belive you

[URTARDS]

REAL REAL REAL REAL REAL REAL REAL REAL

[thankyou0]

use stronger magnets "neodimiums"

[Cypern]

FAKE.....This does NOT work....'FAKE FAKE FAKE....

[Jup1Pup1]

i DONT LIKE KILLING PEOPELS!

[MAGNETGRUNT]

Ricky is one sick puppy

[VASLEE]

that looks like an awesome flywheel is their any way you can get a 90 degree angle on that

[datzfast]

its fake, but i now this only because this set up is tryed by everyone allready. i want to see something different.we allready no why this wont work.

[claymodeling1]

Fake! What's under the plate? A little motor with a battery. No wires need for that.

Also, who gives a shit how fast it goes, how come all these guys worry about exactly what speed it's running? The source of energy is important, not whether it's 300 rpm or 350 rpm. What a crock.

[rooivalk24]

if there is no motor then why not move the camera all round?? it's a FAKE!!!! that's why..

[variablestatus]

although mylow made a video admitting he faked the whole project it still helped instill some momentum for others to be inspired by the idea itself. there were several character shortcomings that led me to not beleiving mylows howard johnson video's. i personally try to look at the positive effect overall that was accomplished with these premeditated false video's in the midst of a personality that really has a deep passion and much hands on time spent with the subject matter. myself included.

[theoneagain]

fake fishing line wire underneath the system has been debunked .

mylow is a twat

[davedude2040]

What's the black line on the table to the left on the motor?

[theranch]

Awesome dude. Keep up the good work.

[malerror]

where is the fishing line¡??

[ThinkTank255]

Why is this so amazing??? Do any of the believers realize that the LHC uses MUCH more complex magnetic configurations? Think about all the energy that was put into magnetizing the magnets. This is simply borrowing energy from the magnetic domains, and in the process, demagnetizing the magnets.

[ArnoldVeeman]

holy crap! This is what we've been looking for right? :)

[capricious71]

Is there a video anywhere showing how long it runs? Maybe a time-lapse thing. Once it stops I don't see what can stop it...

[steornhugh]

Cool alright - must be about 300 RpM at the end. Could this be real? I'd love to think so. Sorry for doubting if it IS for real, Mylow, but I'd still love a 1st reproducton.

[sspoke]

too bad your getting crap from that Desertphile (old man with army hat) he always talks shit to everyone's invention because hes too stupid to invent anything himself

[egn83b]

cool

[MagneticBeliever]

I don't know if anyone else has noticed but the thing did build up speed. Look at it from the start then click more to the end and you can see and even hear the difference.

[exgenica]

Not sure if you're trying to suggest that by doing so it adds validity, but unfortunately it doesn't. A small low-torque motor would produce the same behavior, as would the hall-effect device controlled electro-magnetic motor described earlier, and as could a higher-power DC motor under PWM or other type of electronic control.

"...but the thing did build up speed"-MagneticBeliever

[MagneticBeliever]

All I said was that it moved a bit faster towards the end, lighten up.

[exgenica]

You could lighten up too. There was no attack of any kind. Just addressing a possibility

I said I didn't know if you were suggesting it was some sort of technical validation or not. But felt compelled to again point out to other readers that there are other ways to produce the same effect

Marlow emphasized the acceleration as being important, and was also very visually/audibly obvious. I really couldn't see a need to repeat the observation unless it was an attempt to influence the lay person

[neorules]

Fizzguts-- do your homework buddy. Mylow has a unit on a GLASS tabletop. Have you seen It? Kinda blows your theory out of the water now doesn't it!!!!!

[fizzguts]

Scumy fake. Next time don't be so lazy, use a long drill to go through the cabinet top from the back and then bring the power wires up to the rotor pedestal. That way you will be able to pull all the drawers out and shoot looking up. DUH!

That should fool most of the drooling morons who think this is real

[killawhat1]

@ exgenica

I was the one that gave you thumbs down, I meant to click the other

Any way i agree, i wanted to build one of these but have been waiting for some kind of Instruction that is informative to its construction, like what array do the magnets lay in , Make A sketch Mylow North south, array that works the dude selling plans is the fraud how can you sell plans for sth that you can not make to work, Untill there are other working models this is just slowly becoming a Wankfest,

[5zerocool]

Mylow, thanks for all of your hard work. We appreciate it. =)

[croydon3000]

I am going to make one of these motors.

I can't wait for the MIB's to show up.

Bring it on turkeys.

[exgenica]

Sorry croydon3000, but as I understand it from recently reading within the past day or so, other websites re: Mylow's motor (including from strong supporters), you can't get one of these to work unless you have the right "feel" for it.

It's not just applying science, it also apparently depends on your:

karma/feng-shui/the-force/miti­chlorine count

A disappointing revelation, to say the least.

[koneheadx]

FEEL does not mean to experiment with the spacing of the magnets until it spins by itself as Mylows motor does without ANY DOUBT form anyone wathcing his videos

Science is not slandering and making up lies like Mylow says this motor runs on "feel and karma" as you imply like a stupid stooge would an does.

[ahamatmabrahman]

@croydon3000 Sorry if I sound really ignorant but do you just make one of these machines, start it spinnig and then all your electrical appliances work when you turn them on? Does it work within a particular or average radius?

[lurkist]

I thought Mylow was in hiding after a visit from the men in black. Really wish he would keep his word.

[pozzerbob]

What kind of bearings?

[eurogoldexchange]

What nonsense

[Aquar1uZ]

pulses 4/2 2/sec = roughly 120RPM

Looking for plans to replicate, can anyone point to them?

Thanks

[exgenica]

I recall seeing a few requests to conduct the demonstration 4ft from ANY surrounding items (walls/floor, cabinets, etc)

Years ago I glued neodymium magnets to the periphery of plastic disc I mounted on a low-friction bearing (scrounged from an old CD player)

Using a powerful electromagnet, I was able to make the disc spin from over 1ft away

The same could probably be done with a high pressure air nozzle, over-dubbing the sound.

I think the requests for a 4ft separation are also reasonable

[uncleshorty]

Excuse me but the toy at office playground takes batteries.

[exgenica]

That's the whole point. It takes a battery to make it work

The 9Volt battery is HIDDEN in the base (along with the hall-effect sensor & electro-magnet that completes the motor. It also works on 6Volt battery made from 4 x 1.5Volt "button" cells...in otherwords a VERY small and easily hidden power-source (<2 cu-in)

The same COULD be used to spin the disc of magnets in Mylow's device. There is more than enough space to hide them. One reason people want to see this made with transparent materials

[exgenica]

The main problem Mylow (and others) face is we KNOW devices like this can be easily and cheaply faked

As I identified there's a $12 "perpetual motion" TOY out there. It also uses a circular configuration of magnets

That means the standard of proof goes up, and it's on the person making the claims to prove the claims by resolving all questions. It's harsh, but showing even a single way one COULD fake results undoes everything

Too bad, and sorry it upsets people, but that is the real world

[kevinwafer]

Nice work,

In the book 'The Hunt for Zero Point', it's mentioned that German funded scientists perfected this in the mid 40s. On one test the disc span up so fast it couldn't be stopped, broke off its mounting and blasted out of the room! :-)

[exgenica]

Simple flywheels do that too. In one place I worked ~30 years ago an experimental energy storage flywheel virtually destroyed the concrete bunker in which it was tested

It's possible the German device was such a flywheel accelerated magnetically. History gets details wrong from time to time. Not saying that's the case, but one needs to keep an open mind in both ways

"On one test the disc span up so fast it couldn't be stopped, broke off its mounting and blasted out of the room!"--kevinwafer

[Sagitdragon]

Mylow you are an inspiration to the world and what you are doing will help to re-set Humanity back on its correct course again. This course is one where we shed our serfdom and free ourselves from the grid. People reading this .....start talking about this stuff.. just send everyone you know a link to this page, post it on your facebook site , myspace. Dont let this be buried. Mylow you are awesome... thankyou

[31347ghg]

Several years go, I ran enough experiments with magnets to convince me a magnetic motor was possible.

[ronhipner]

To the nay sayers!

Mylow isnt tryring to impress you, It appears that he is sharing his experience and working toward a common goal.

Nay sayers wouldnt believe it even if they seen it. If mylow did as they want and set the motor on a glass table with 300 feet cleared they would say the video is faked. "F" the nay sayers. Keep up the great work and keep us informed.

Thanks Mylow!

[andreboogie]

Mylow, please keep up the good work! Think positive and ignore the negative. You will become a rich man.

[chaosvisum]

I am a college student half way to a bachelor degree in chemistry, biology, and computer science. Strait A student. I would like to replicate this work please post schematics. My physics teacher is as well interested.

If i can replicate this I will give credit were it is due. Humanity needs an open mind.

[HybridWaterMan2]

One last thing Mylow, remember Tesla's experiments with the electric car? Was it true or just fake- we will never know. Becaue he got so upset with people's attitude that he tore down everything and said the same words you did- "The world is not ready for this". Based on his reputation, he probably had done it - and we lost out because he lost heart.

Don't tear it down, don't give up- the truth will out itself in time.

[excel60]

Would you please set your device on the floor and pan out your camera so there is at least a 24' area around the motor.

[ExomatrixTV]

Demonstrate it on glass table or plexi-glass table etc. see through make everything transparent

even if I trust you Mylow

It is better for everyone to do it the right way of presenting it !!!

[Magnetmotorman]

In fact, those who are trying to hit you hardest will soon become your best assets...trust me..this is always how it works.

[Magnetmotorman]

Mylow if you want to get lots of torque just add 2 more polypropylene discs to attach the magnets to..do not use aluminum and offset your magnets between discs and you will enough power to provide your house without being on the grid.

Again, DO NOT be DISCOURAGED by naysayers...they will soon be eating crow and apologizing..DO NOT GIVE UP!!!

[HybridWaterMan2]

OK, last post for now, Mylow. Here's what I want you to remember- when the accusers point a bony finger and scream "scammer" like an old, bitter, hag, ask yourself this: "What am I scamming people of?" Have you asked for a penny? No. Have you been demanding rights and exclusivity? No. Have you been using heavy Public Relations plows so everyone knows your face so you can be famous? Not that I can see. A scam typically rips people off, and I don't see any of that.

Don't be discouraged friend.

[Magnetmotorman]

Mylow Great Job...you should be proud of yourself...also remember the earth is screaming for you to continue your efforts...no one with any brains would go against you for being a part of many of us who know that magnetism is the wave of the future. Mylow, you are not alone in receiving unjust and undo negative comments for something you know works!!! I have the same problem. I have told people that the magnetic motor I have designed gets 46.56KW..everyone laughs at me. We must go on Mylow.

[strongestmagnets]

Welcome to the club. My handcap was lack of money and facilities, what kept you away from progressing (just curious). Had I been fortunate enough I could have completed an application lelivering close to 20 kW per rotor axis section. Yes, magnets can do work, make no mistake.

[HybridWaterMan2]

Mylow, have you tried adding a second set of stator magnets to the other side? Or does that throw it off? Seems like it would add more torque and or speed- just curious. Also, when you are assembling the rotor- do you test the placement of each magnet with a temporary glue, then permanently fix them in place?

[HybridWaterMan2]

One of my favorite sayings: "A man with an experience is NEVER at the mercy of a man with an argument". I have had people call me every name in the book- but I know what results I get and what others have gotten. Now, I just block the idiots- let them move on to another victim they can tear down.

You look like you've really had some amazing breakthroughs- don't let a few ignorant slugs discourage you from going forward Mylow- keep focused on moving forward- let the screamers fall away.

[HybridWaterMan2]

If you have truly gotten this to work like it appears it does, then you must plug your ears to those that would rather tear down and destroy- what is their motivation? Who appointed them the self righteous judges of technology? NO ONE. Keep moving forward, your break through will speak for itself.

[HybridWaterMan2]

Mylow, don't give up my friend. There are always going to be people who have nothing better to do than to tear down and destroy- they actually take pleasure in it. Some of these guys you should just block- they're worthless naysayers who can't take the time to build anything themselves to prove or disprove a theory. I have had my share of them in the hydrogen generator world, even though I got results and even though people who replicated what I taught got results, I still have accusers.

[exgenica]

HybridWaterMan2,

If you're referring to me then your condemnation is misplaced. I NEVER said he was scamming anyone. I said THIS video presents results in way that COULD be easily faked in a number of ways and I identified a few of those ways

He needs to work on his setup/presentation to make it bullet-proof

Extraordinary claims require extraordinary proof

I'm a scientist with multiple Utility patents, and yes, some of my inventions were created in my garage. I have some experience in this

[HybridWaterMan2]

I didn't mention anyone's name ( I also have a utility patent with more on the way). But let' get some perspective here exgenica, this man didn't have to post ANYTHING. He could have kept it in his house, continued to work on it, gone through patenting process etc. But he freely shared it - for what? To have an open source free energy research community start to disembowel him?

Technically- he doesn't owe you or me or any of us any explanation.

[HybridWaterMan2]

NOR does he owe you or me or the experimenting society at large any rebuilt prototypes (which you should know cost a lot of money and time) to meet our self imposed criteria. Build it yourself. Put your own time and money and countless hours with magnetic re-gauging alignments. Then you can design whatever fool proof demo you want. But even YOU will get the naysayers slamming you no matter how good a demo you build.

This man at least deserves our support.

[exgenica]

If device is constructed as he claims then rebuild cost is very low, perhaps $20 at MOST. He already has magnets and low-friction bearing

The perhaps 10 hours spent rebuilding using parts that couldn't hide components would be worth it to me if it were my invention, which it is NOT

Your statement is the opposite of what constitutes good science. Good science invites peer review and answering inquiries

"NOR does he owe you or me or the experimenting society at large..."--Hybridwaterman2

[abiggerdog]

WHATS INSIDE THE LAMP !!! an electromagnet, maybe, hmmm ?? d00d, show us that in the middle of a barren table with nothing for a good 6 feet around, nothing underneath, nothing above

[exgenica]

It has to be more than just clearing away the lamp, the cabinet, etc.

The entire mechanism itself has pieces that are large enough to hide a driving mechanism.

Even the large silver rectangular frame could be used to run wiring, hide small batteries, etc. Given the right design, it could even be used as a field magnet or armature.

That's how magicians create illusions, the seemingly un-related support structures are part of a trick.

[exgenica]

If he really wants to convince people, he'd construct everything but the magnets out of clear plastic

In the model shown there is MUCH more than enough hidden space to hide a hall-effect sensor, a small electro-magnetic coil, and a 6 to 9 volt battery pile

That's ALL you need in order to make a toy that will make magnets rotate in a plane (e.g. on a disc) for WEEKS at a time

BTW such already available toys can exhibit EXACTLY the motion characteristics Mylow describes. Slow start...speeds up

[exgenica]

Here's an example of one $12 "perpetual motion" spinning toy

At the "officeplayground" website go to the "spinningballs.html" page. It's "product code: 1582"

Or, I was also able to Google it just by searching this (include the " " quote marks in search)

"perpetual motion" AND "Product Code: 1582"

The difference between this toy and Mylow's model COULD be simply that the magnets are in a vertical plane on low-friction bearings instead of a horizontal plane with low-friction bearings

[exgenica]

The base pedestal attached to the disc of magnets also lends itself to inquiry in this video

Easiest way to "fake" device would be:

Use small virtually silent motor (e.g. found in CD/DVD player). Mount inside or below the pedestal. The speed/power control wires could be easily taped to the underside of the top of the cabinet, remain out of sight and could control the "slow speedup". We would not see them in THIS vid

THIS video just isn't verifiable. Too many ways to "fake" it, even if genuine

[bboy310]

i don't get the big fuss, can someone plz explain why this magnet motor is different from other magnet motors.

[jekyll1776]

This reminds me of a "project" we did in Basic Electricity class. a D battery, some wire, and a paper clip. give it a little nudge and the coiled up wire will spin forever. i guess ud have to see it to know what im talkin about. But i dont see a big deal here, hate to be negative. For this thing to be able to power anything it looks like it would have to be massive.

[jekyll1776]

maybe if u stood a cylindrical magnet on the top center, so it spins. and suspend a coil of copper wire around that to produce some sort of voltage. that would interesting. maybe a few millivolts?

Good luck.

[h2opower]

Can you afix that wheel there to an cars alternator and see how much energy you can get from it? Thanks

[theoneagain]

however it does look real

[theoneagain]

streling for your reputation you need to verify his claims in person no BULLSHIT ...

[theoneagain]

sterling hasnt verified any of his motors so i think its one big hoax i wont believe this guy until sterling see the thing runninf for himself

[RBare2007]

Continue with what?, I watched the video to the end and saw several easy ways to fake this, people like you keep shouting naysayers, heres an idea for you, show us a house powered entirely from an OU device or a car or even a flashlight, that will shut up the naysayers, in fact we will all run to our local store to purchase our own!

Do your history on OU claims, seriously it goes back 100s of years, gotta be the slowest development in the history of developments!

[aber0der]

I think this looks too fake to actually be fake. I mean, if it were fake, wouldn't it look more real?

This is so confusing. I think I'll throw a dice to determine if it's true or fake.

It's a 4! What the hell does that mean? 4? Fourgery? Fourtune? Fourget about it?

Lucky! Lucky, stop baiting the cat, go back in the cage. Now!

[carvehead]

Why not move it from its position while it is spinning so that we can see that something isn't driving it from underneath. Opening the drawer doesn't prove anything. There could be a flexible drive shaft being run from another room.

[kraljevo8]

very well done. keep working and keep developing. many things can come from the small people doing their experiments and research. there's no reason to stop trying. keep it up. great work.

[itravel411]

Keep going Mylow! We support you! =))There have always been, and there will always be SKEPTICS. It's possible that the skeptics' comments are coming from the MIB people, themselves (or others who have lots to lose from free energy) to try and discredit our beliefs that your engine is working. I believe you. I just wish there were more verbal details like your thoughts of how you make this thing.

Listen to the people that support your work, and ignore the skeptics! Good job, Mylow!

[Drevtoobe]

Are the "negative people" going to be killed on Dec 21, 2012 because we are not "worthy"?

I will look at the clip when I get home. I have a bold prediction for you: In six months Mylow will be history and the only "evidence" of it working will be a few bullshit clips.

[pinestonemtn]

Great demo, mylow

I'm impressed you were able to modify your original and make it even better.

Don't take it apart just yet. Have someone else come and see it & let them tell us about it.

Never stop experimenting.

[r123062b]

Steling, Why dont you persuade Mylow to bring to an independent body like a university to verify it. You're losing so much of your credibility because your approach has lots of grey area. If an independent body certified this then it can help the whole world but if only a YT video no sound mind will believe in it. THis is YT for Christ sake anyone can make magic.

[David130B]

Another piece of advise, do the replication far away from any electrical power source and make your motor out of transparent materials so they can't say it uses batteries either, good luck and god bless.

[David130B]

Place the magnetic motor on a completely transparent glass table and repeat everything you did in this video. In this sense, you can rebuff any criticism that any reasonable skeptic might have. Then, and this is by far the most important, place detailed diagrams of how you built the system and leave nothing out. You should include specific dimensions and exact materials so that absolutely nothing can be left to the discretion of the replicator and avoid any error, good luck and god bless.

[nasagolfer]

Most outstanding video yet!!! Anything worth doing is hard. I'm reminded of the "Anyway" prayer by Mother Tereasa. People are often unreasonable, irrational, and self-centered. Forgive them anyway. If you are kind, people may accuse you of selfish, ulterior motives. Be kind anyway...What you spend years creating, others could destroy overnight. Create anyway...In the final analysis, it is between you and God. It was never between you and them anyway. You can Google whole version. Good job!

[harpbloke]

yep, ive gotta agree, this is great. i hope replicators can do this soon.

thanks for posting these fab vids

[JavaLessons]

Gets interesting when others replicate.

[Ninjamaster333]

This is so fucking awesome.

Free energy!

CELEBRATION!

[PESNetwork]

Oops, I accidentally deleted a comment from eroutt: "i still think there is a motor in the cylinder tube under the disc with a relay switch! i have tried this same thing with bar magnets an it did not work! it was a smaller version of this:( good prank you had me going! this is like the Bigfoot in freezer hoax on cnn! "

[PESNetwork]

If there was a small motor in there, it would have to move the outer bearing cylinder in relation to the stationary base pedestal. It's conceivable that something like that could fit in there, but there is no such noise from a motor that would be straining to accelerate the device from zero.

[exgenica]

When mounted on a low-friction bearing there would be no "straining". Even a low-torque low-power motor would quietly get the disk spinning. A motor controller would start things off slowly and speed up...just as shown.

Not saying that's what is going on here, but current technology would let this be EASILY and inexpensively done with a very small and virtually silent motor.

Both the motor and the low-friction bearing could be salvaged from a dirt-cheap CD/DVD player.

[megavox]

Stator off equilibrium, vibrations always goods, keep up the great work we wont forget you

[mochiam]

It's time for mass production and fight not to loose this technology too

[mintork]

i don`t think this is fake Mylow, it should be obvious to any intelligent human being that this video is real.