2010 Camaro 100% Bone stock engine with LG SuperPro LT's , CAI and LG Custom 3 inch exhaust

[Mr2010Luistorres]

I always here about SS running mid 12s stock and I do believe they can run 11s with bolt ons. This is a great V8 engine GM built but yes the body not so great its just too heavy

[willghass]

Do they spin out at first to warm up their tires?

[2001camarolover]

holy shit, who ever was driving this stock ls3, i got to say, my respects to you, you are a fucking awesome driver, you will probably make a smart car look fast lol, if and only if it was manual of course

[concujak]

ANY MODS = NOT BONE STOCK just a FYI

[OrangeChevyII]

@concujak Just an FYI, the motor is(was) bone stock. Thanks for looking!

[JustAnotherOne1]

fuck that was fast!

[timflynn56]

when you buy a ford you must trade your brain it for it.read the damn title dumbass bone stock engine with lt,cai,and 3 inch exaust.i know these cars can run 11s with bolt ons because i own one.and i have seen a BONE STOCK 2010 camaro run 12.61et

[TacticalSuperRebel]

hahaha bone stock....with mods.... in other words NOT bonestock, LOL

[Sickassfords]

this car has a cam on it bolt ons alone cant do the job.

[sixty9fordkiller]

Thats because you drive a ford! Haha...j/k. It dont matter to me what you drive. Bottom line, my 2010 has ran a best time of 12.82 @112 and it is BONE STOCK from filter to exhaust tips.

The car in this video is laying down 427RWHP. The title doest say but it does have an ECM TUNE. So for full exhaust, LMR CAI, and LG Motorsports tune, +TIRES, 11.80's is reachable on these cars with these mods. And if you consider the experience LG's racing team has had with LS series engines, theres no doubt

[OrangeChevyII]

Lol, I can do it in any Camaro with the same bolt ons. This car went 12.70's off the show room floor with 367 rwhp, do the math.

[Sickassfords]

yeah if u got 4.60 gears on the rear end with no passenger or back seats and spare tire out. Yeah i belieave that a camaro can run high 11.

[OrangeChevyII]

@Sickassfords lol, nobody even had gears out for these cars till just recently. All the interior is intact and has never been removed. I like your thinking though.

[philthyco]

@Sickassfords i didnt hear a cam..

[sixty9fordkiller]

@Sickassfords mine ran 12.8's and put 391 rwhp bone stock. Buy im probably a heavier dude than the driver in this video. The CAI, Headers, Exhaust, and tune got the car into the high 11's like this one. The headers made the biggest difference. Since then ive added 4.10 gears and FAST LSXR intake manifold and the car is a solid 11.5er all day. On the stock clutch!

[Sickassfords]

@sixty9fordkiller I find it hard to believe but if it does nice car.

[05gt5]

Nice run man!!!Car looks and sounds BADASS! I have a 2010 shelby 100% stock w/ MT's on it and ran a 11.92 looks like u got me beat :( lol Did u use the launch control on that run?? Dont hate on the stangs tho guys i kno full well that a 2006 N/A mustang gt runs 11.5 and still under warranty.

[philthyco]

@05gt5 a 06 stock n/a gt runs mid 11's..you are joking ..right?lol!

[05gt5]

@philthyco well remember i said n/a stock. It does have mods light considerbal weight loss, gears CAI ext but yes ral mid 11's. Look it up on here. Fastest n/a 06 stang

[philthyco]

@05gt5 u said stock..not stock block..

[Sickassfords]

@philthyco look it up fool a mustang hold the n/a record. sorry to burst your bubble.National record holding n/a 3valve stock 2006 GT.

[philthyco]

@Sickassfords we were talking about bone stock..and no BONE stock 06 gt can run a mid 11!

[370LSXSSTB]

i say its stock, just intake and exhaust  wow

and maybe a nice little 200 shot

[OrangeChevyII]

10.28@135 says your a dork, thanks.

[Kodiak1899]

2010 Camaro 100% Bone stock engine with LG SuperPro LT's , CAI and LG Custom 3 inch exhaust..

The title needs to change because this car is not bone stock...dork

[OrangeChevyII]

Car went 11.29@122 on motor last sunday with a Cam in it. Yea me! The car weighs 3800 as we speak, I wish it weighed an even 3700. That would be great.

[blown06tc]

LOL, I love it!!! 100% bonestock.......with full exhaust and intake and looks like at least drag radials in the back and skinnies in the front and god knows what else.....yes 100% stock makes perfect sense.

[Mishre]

I'd say your 100% bone stock fastest car in the country claim is rather far fetched. first.. since you aren't 100% bone stock obviously and it looks like drag radials and skinnies up front? 11.8.. how's it feel to be keeping up with the 98 SS with the same mods? ;)

[BoostedYards86]

he should feel pretty decent knowing that the 2010's are ALOT heavier.

[Mishre]

he also has massive weight reduction, he is down to 3700lbs with him in it.. if he weighs 200lbs that is getting close to the 98 SS weight

[OrangeChevyII]

I have nothing to prove so I wont delete the comments. The car speaks for itself. Thanks though, I did put a LG GX6 cam in it so now I can call it a modded motor. It should run 11.30's on motor this weekend and some 10.50's on spray.

[mrjlwilliams]

I truly think its amazing that you are doing so well, without heavy mods to the engine. Great job. Exhaust; headers; and CAI. WOW, I would like to do this to mine...so that's a total of about $3500? Where did you have it tuned? Man, I have to say...that is the best money spent for the 2010 Camaro, and it still looks stock. Once again, GREAT JOB.

[HOTCIVIC]

What is so hard to believe about a 430 rwhp car running 11.8 @ 116?

Look up "Cobra Killer" on Youtube. That red SS has 363 rwhp. No suspension mods. No weight reduction. It's a street car with drag radials and in the vid it ran 11.8 @ 115. This '10 has 70 more rwhp and weighs maybe a couple hundred pounds more. I don't see why people are calling BS on this car. I think this '10 can go even quicker.

[YngwieGuitarGod]

I agree with the others and call BS too. But the run still looked good! Nice Z06 wheels.. haha

[HKuspDADDY]

is that the first time you have seen zo6 wheels on a camaro or is somthing else funny?

[YngwieGuitarGod]

First time I've seen them on a new Camaro, yes. I have them on my 96' and 02' though. :) That's cool that they work on the new ones. GM hasn't changed the lug pattern.

[HKuspDADDY]

i thought you were making fun of it. i have said it since they came out that they need zo6 wheels out of the factory, not those but NEW zo6 wheels

[YngwieGuitarGod]

Yeah, good point.  I'm sure we'll see them soon enough. Only thing is, they don't make them that big yet.

[ZMagnum1]

I'm sure you will delete my comment but I call BS on this. There's no way this is bone stock. This is not a good way to introduce your car or your car club to the world. Get real.

[OrangeChevyII]

Lol, I think you think Hennesey cant keep up with my 428 rwhp car!

I went a 10.96 the week after this run on a 150 shot!

[08turboSS]

Dude. you are a joke and to anyone that is dumb enough to believe this ... Hennessy's supercharged 550 hp new Cam SS is about this fast...Somebody is throwing down a 50-75 shot here..... and full bolt-ons..... Hennessy and a couple other companies, like SLP ran true 100% bone stock cars,, WITH no ehxaust upgrades and headers such as this car in the video has... their cars, with professional drivers ran 13.1 at 110-11 mph..... High 11's and near 117 mph would require over 75 more hp...

[justincmorris]

hey turbo I am sure SLP didn't use any drag radials on their "test" runs either. Traction will trounce a professional drivers time any day of the week if they tested with street tires. In a 6 speed car being able to leave the line when stalling up the motor and not having the tires spin through first and each time you make a shift plus his exhaust and other upgrades can more than give a driver 1.5sec improvement times in the 1/4.

[onixbeats]

true, tires make all the difference in drag racing.

[venomws6]

Very nice man Congrats and nice driving.

[HiShBL2]

WOW that's a great number dude , keep it up .