Thanks everyone for the compliments. The A-10 WartHog is completely scratchbuilt from 3 view pictures. I used 1/4 inch BlueCor Foam to construct the plane with an undercambered wing for more lift and drag to get this 6 foot machine fly indoors.
@rcAllDayLong Glad you like the A-10. At the time it was the largest wingspan plane flying indoors at our club's facility. Next came a 7 foot B-36, then an 8 foot B-17, and now there is a 10 foot wingspan C-47 flying in this same building. Stay tuned to see what along next.
@bmwalp1na This A-10 weighs 4 pounds and is powered by two small 29gram electric motors driving GWS 7x3.5 props. Also the plane is built with under cambered wings for more lift and slower flight so that it can fly indoors.
SCRATCH BUILT? UNDER CAMBERED WINGS? In these times where one call his self a Modeller only because he has enough money to buy a ready to fly model these terms are obscure. The only knowledge they have is internet shops. Nowdays one spend in a month what years ago we spended a whole year.
Keep up the nice job. When most of them will leave the hobby wiith the wallet empty you will continue full of satisfaction and knowledge.
i think we can be a self modeler also if u have the money to buy rtf plane, personaly o have not this money but i prefer to make my plane because it give u lot more satisfaction when u know ur plane make ur hand can fly..
WOW! Thanks for the compliment. We are very fortunate to have a flying site like this. I built this A-10 to show that you can fly a big plane indoors. Among our club members there are 10 planes with 4 foot to 8 foot wingspans that fly in this building.
Hey Guys, sorry about taking so long to reply. This A-10 is scratch-built from BlueCor Foam using 3 view pictures for plans. Just Google search A-10 and you will find 3 view drawings. Then you can enlarge the drawings to whatever size plane you want.
pilot74sparki, Thanks for pointing out my error. It's a little larger than 6 inches. The A-10 is built out of 6mm bluecore foam, powered by 2 hyperion 2205-34 brushless motors with GWS 7-4.3 HD props, 2 Phoenix 10 speed controllers, and weighs 4 pounds.
awesome awesome awesome
w171020905 1 week ago
Thanks everyone for the compliments. The A-10 WartHog is completely scratchbuilt from 3 view pictures. I used 1/4 inch BlueCor Foam to construct the plane with an undercambered wing for more lift and drag to get this 6 foot machine fly indoors.
RaceEagle89 10 months ago
alright where did you get that and how much did it cost?
akapono 10 months ago
plans please!!!! looks really nice keep it up!!
starlae2004 10 months ago
did you buy that or did you make it because i would love to have one!
AmazingHalo 11 months ago
A nice piece of engineering! You should have a swarm of 4sites flying in formation around it.
millerhill 1 year ago
More, More More!!!!!
Excellent!
chrisjdoran 1 year ago
@chrisjdoran More, More More is coming!! Presently building a 12 foot wingspan monster, and of course to fly indoors,...I hope. Stay tuned!
RaceEagle89 10 months ago
nice
DToni1973 1 year ago
pretty slow speed!!
MIGUEL2005LIMA 1 year ago
nice. it looks like it doesn't need much lift to get into the air.
phantom60504 1 year ago
Is this a kit or scratch built? Very nice scale landing there!
Theriomalstrom 1 year ago
Nice!
rcAllDayLong 1 year ago
@rcAllDayLong Glad you like the A-10. At the time it was the largest wingspan plane flying indoors at our club's facility. Next came a 7 foot B-36, then an 8 foot B-17, and now there is a 10 foot wingspan C-47 flying in this same building. Stay tuned to see what along next.
RaceEagle89 1 year ago
Man, go outside and fly.
Peanutdinos3000 1 year ago
woaw :D very nice i love it:)
wath for a nice slow flying:D
i want to know more about it,
do y have some plane to make it?
psychowolf666 1 year ago
boy can he fly a plane, that was beautiful lol
TheBeastOfTheEast54 1 year ago
Nice job mate!!!!!
kurtzy04 1 year ago
WOW
That is cool
good on you!
from New Zealand
waiheke109 1 year ago
where's the fart gun?
pete5668 1 year ago
THAT'S AWESOME!!!!!!! :D Great idea! keep up the good work!
RoboTekno 1 year ago
ive never seen an edf fly so stable at low speed like that they usually dive very impressive nice build
bmwalp1na 1 year ago
@bmwalp1na This A-10 weighs 4 pounds and is powered by two small 29gram electric motors driving GWS 7x3.5 props. Also the plane is built with under cambered wings for more lift and slower flight so that it can fly indoors.
RaceEagle89 1 year ago
@RaceEagle89
SCRATCH BUILT? UNDER CAMBERED WINGS? In these times where one call his self a Modeller only because he has enough money to buy a ready to fly model these terms are obscure. The only knowledge they have is internet shops. Nowdays one spend in a month what years ago we spended a whole year.
Keep up the nice job. When most of them will leave the hobby wiith the wallet empty you will continue full of satisfaction and knowledge.
Giovanniram22 1 year ago
@Giovanniram22
i think we can be a self modeler also if u have the money to buy rtf plane, personaly o have not this money but i prefer to make my plane because it give u lot more satisfaction when u know ur plane make ur hand can fly..
psychowolf666 1 year ago
Pray tell, what is the All Up Weight with batteries?
How did you make the wings? With Ribs? If so how much do they weigh?
Inspiration to scratch builders
erh7771 1 year ago
awesome stuff! very nice and slow for an edf!
BrotherBloat 2 years ago
im jealous both of your plane and the flying area :P
Alexw851 2 years ago
WOW! Thanks for the compliment. We are very fortunate to have a flying site like this. I built this A-10 to show that you can fly a big plane indoors. Among our club members there are 10 planes with 4 foot to 8 foot wingspans that fly in this building.
RaceEagle89 2 years ago
I love that air plane I relly want one where did you get it frome?:)
jose142702 2 years ago
Thanks for the compliment and posting to my video. I scratch-built the A-10 plane using BlueCor foam and a 3 view sketch I found on the internet.
RaceEagle89 2 years ago
@RaceEagle89 You scratch built it? It has remarkable detail!
phantom60504 1 year ago
@phantom60504 Thanks for your compliment. I took 3 view drawings and enlarged them to 6 foot wingspan.
RaceEagle89 1 year ago
omg
iissyy123 2 years ago
Cool I'm guessing it's made of foam, Flies really slow!
FireFerret2222 2 years ago
I used 1/4 inch BlueCor foam to build the A-10.
Thanks for you compliment
RaceEagle89 2 years ago
fait par ordi
PR4Y3R 2 years ago
but is it made of titanium?
ArcticSheep 2 years ago
lights, put some lights.
PLISKEN12 2 years ago
nvm
tarpenman 2 years ago
the plane is not 6feet
tarpenman 2 years ago
When it says 6 feet, it means wingspan.
broadblik 2 years ago
That's right. It is a 6 foot wingspan A-10
RaceEagle89 2 years ago
wow great quality video what is that like .30 fps?
degicank 2 years ago 5
You hanger rats! How can you guys build such fine models?
SomeUselessGeek 3 years ago
where did you buy the plane from
mclarenlll 3 years ago
kk
but awesome flying!!!
LOL98LOL 3 years ago
how many channels
????????????????????????????
LOL98LOL 3 years ago
It is 6 channels. 4 for the standard flight controls and 2 for fake bomb releases.
RaceEagle89 3 years ago
that's pretty friggin cool
nabbunsechkie 2 years ago
Hey Guys, sorry about taking so long to reply. This A-10 is scratch-built from BlueCor Foam using 3 view pictures for plans. Just Google search A-10 and you will find 3 view drawings. Then you can enlarge the drawings to whatever size plane you want.
RaceEagle89 3 years ago
NICE plane. can i get plans or buy this thing at a hobby store???
thepilotboy 3 years ago
RaceEagle89, where can these be purchaced??
monster271 3 years ago
LOL man its FLOATING!!
awesome!!
qwwqqe 3 years ago
Where did you buy this plane? I'm always finding just smaller ones.
VCTony92 3 years ago
it looks awesome,,,, but it seems like just a sin that it doesnt have a nose gun. can't you make one just for the extra detail?
chaingang90 4 years ago
Chin gun, technically. A Chain Gun chin gun. Heh, heh. I think they're still made by GE, anyway.
SomeUselessGeek 3 years ago
@SomeUselessGeek Oops -- it wasn't GE, it was McDonnell Douglas. Anyway, they're owned by Alliant Techsystems now. Whatever.
SomeUselessGeek 10 months ago
sorry I ment GWS not SMA....wooops...2many beers
ak47madman 4 years ago
that flies better tham my sma A10 on ly-po batteries ...welldone
ak47madman 4 years ago
Truly awesome...well done
Servoboy 4 years ago
Wow and wow. What an amazing build. It just floats so good.
RCSuperPowers 4 years ago
The wing loading on this warthog must be next to nothing! title sugests six inches not siz foot - I was shocked and amazed :-) lol
pilot74sparki 4 years ago
pilot74sparki, Thanks for pointing out my error. It's a little larger than 6 inches. The A-10 is built out of 6mm bluecore foam, powered by 2 hyperion 2205-34 brushless motors with GWS 7-4.3 HD props, 2 Phoenix 10 speed controllers, and weighs 4 pounds.
RaceEagle89 4 years ago