LIQUI MOLY MOTOR CLEAN for a professional oil change

[IPGAuto]

LiquiMoly is a great product, I know many shops that use it. But lets be real, no motor looks like that even after skipping a few oil changes. That oil is straight up gunk, matter in fact thats just grease on there. Every motor is nice and clean inside with the metal having a nice brown dye from the oil. But still, its great to clean the motor out every so often

[devenking]

@IPGAuto -- every motor isn't nice and clean inside, as evidenced by these photos: blog.bavauto . com/bmw-e46/bmw-and-mini-oil-s­ludge-build-up-and-cleaning-lo­ng-change-intervals

Granted, this is just one instance of sludge buildup on a dealer-serviced car and I'm not sure of the driving habits of the individual. Bottom line, I (and many others) don't agree with BMW's suggested maintenance schedules!

[IPGAuto]

@devenking - I dont either. Audi just replaced A4 motors due to sludge. I use engine flush often and feel the motor is quieter and runs smoother.

[390merc65]

yeah..ooooooooooooooooooookkkk­kk,,,i am sure it cleans that well

[mkubiak67]

this crap is just snake oil

[LIQUIMOLYasia]

Hello Stevenesio, thank you for your comment, I believe the cause of oil starvation was cause by sludge build up in the engine over the years and not by the flush itself. In this particular case using Liqui Moly's Oil Sludge Remover P/N 5200 would have been a better choice. As it is poured in the engine and driven for 300km before an oil drain the additive together with the heat from the engine it will do a better cleaning job by dissolving and breaking up the sludge. Thank you

[LIQUIMOLYasia]

Thank you all for the comments, as a promotional video the intention is to show customers what results can be obtain from using a product engine flush. Although these results will not come with just one usage, it does help to break up and dissolve stubborn oil sludge and carbon deposits in the engine with just one usage. Ultimately there will be advantages to the running efficiency of the engine as compared to not using it. Thank you all....

[VeeDubTDI2]

Interesting...

The sludge pic is of an ALH model Volkswagen TDI engine. It looks like you show a clip of the product being added to a BMW engine, and the final result is back to the ALH.

So if I add this stuff to my BMW, it will clean out the crud in my Volkswagen? Simply amazing!

[024reredrum]

LOL Good eye.

[fowvee]

@VeeDubTDI2 - This may be a AHU engine but not a ALH. The center mounted studs on the valve cover were removed on the ALH and the ALH used (7) perimeter fasteners in the aluminum valve cover as opposed to the studs that protrude through the stamp steel cover on the AHU.

And NO offense to the topic starter but these additive bottles simply don't work as advertised. There's no replacement for a proactive maintenance schedule.

[wadasirdar]

thts not true...it can not do tht much cleaning

[94civiclxgrey]

then try seafoam for yourself don;t hate appericate :P

[RULI1974]

me too me too, seafoam is great

[94civiclxgrey]

a can of seafoam works the best too well only half a can and it will clean that shit good i put a half can in my truck with 200,000 miles brought oil pressure back up knocked a shit ton of slug out and i feel more power after i ran the other half of the can through my vaccum hose to clean the upperintake anways thats my 2 cents

[MooseBaker]

@94civiclxgrey Bet it smoked huh?

[94civiclxgrey]

when you say smoked you mean after the carbon was broke loose from the oil rings ? no though it could if the gap between the ring and cylinder wall would have been changed by removing the sludge... but if you mean it smoked from all the carbon burning off out of the vaccum ports you bet but it did quit after 10 mins of moderate driving

[LIQUIMOLYasia]

yes sukie, that's exactly what you do.

[jeffandmissymello]

coughc cough snake oil cough cough

[sukiemoto]

do u put the liqui moly to mix the the old oil and set it for 5 to 10 mins before release the old oil

out....

[iverson246]

yes