@omalley16 I have several shooting videos on my channel where I'm using this stock. Its freaking great. I cannot say enough good about it and have tried them all.
@TheMango121 From the trigger to the end of the stock is 12.5" (1ft and 1/2in) It comes with a few different sling mounting options. The only thing they don't come with is the adapter for a single point sling.
Nice vid. It is designed after the benelli with a shorter length of pull in mind. I have the stock with the "cheek riser" on my duty 870p. Without the limb saver I got mine for about $110. Have the one point sling loop and love it. Replaced my Knoxx stock cause I was having issues with surefire beating hell out of left hand when it traveled 2 +/- inches every shot. LOVE THIS STOCK!
@txcabbie03 I love this stock myself. I haven't tried the cheek riser myself but can say that it works well how it is for me. I have a few videos up where I'm shooting slugs at 80 and 120 yards. This stock just makes it that much easier. I like solid stocks so I stayed away from the knoxx set up.
Finally, The perfect stock. I've been waiting for something like this for years. Ordered it up after watching this video through brownells. Thanks for the video man.
@milspec28 No doubt! This thing is freaking great. I have used it hard and have no complaints at all. Sorry about the video. I didn't think it would be one to get watched or I would have made it a little better. Thanks man!
@kaygeeboi I have had 2 ATI stocks and they where not really bad but kinda felt generic. Its hard to explain. This one is the real deal. I have given it pure hell too. I carry my shotgun a lot and this stock fit the bill. I'm going to do a video soon of my entire set up and why. Its simple but rugged.
@Glockwork9 Yeah point taken. Whatever you do don't get the Tacstar Side Saddle on the 870, I Put 100+ rounds in it and fell apart, I should of got the Mesa Tactical Side Saddle.
@djgunner258 I have used it a lot sense I made this video and cannot say enough good about it. The only thing that might be an issue is if you get the limbsaver option it sticks to clothing. Thanks for watching!
i have a midwest industries silng adapter that i use on my current setup (the adapter that fits between the receiver and stock). will i be able to use this part with the urbino?
@rottiemillie I also have a sling adapter that I used in a video with this stock. The one I have is made by "the mako group" . "The MAKO Group tactical sling adapter for Remington 870" is the name of the video. If you want to use a sling mount you can but they sell a piece that fits on this stock where the receiver meets up. There isn't a lot of info about there products but I have several and there all great quality.
Ja-Ja Nice Remington (with the pussy pad). All Remingtons come with pussy pads? That stock is shorter than the one it comes with even though it's got... you know ... the pussy pad.
@noBuzzkillin I like it a lot. If you don't want a telescoping stock this is a great choice. If I had to do it all over again I would buy the same one. Thanks for watching!
@TheGunEnthusiast67 It is great. It feels very natural. The stock has a weird angle that lift the gun up a little and it makes a big difference. The first few shots where slugs from 30 to 40 yards and they where dead on. I had a benelli with ghost ring sights and I can hit a target just as good with the bead on this 870.
@Glockwork9 Good to hear. I have a couple of aftermarket stocks for mine and they never line up with the bead, they are always to high. Like you say, the angle of that one looks different from others I've seen.
Thanks for the upload. Been looking for something to spruce up my 870 Tactical Express for some time now. I've long thought that a pistol grip really helps with the controls on the 870 (but not the 590). It's a bit pricey, but you get what you pay for. Might have to look for the shell holder.
@MegaGevehr No problem at all. I just wanted a good solid stock with a pistol grip that I liked. I'm very happy with it. The shell holder they have is really nice too. I manage to break the unbreakable so I keep things simple. I don't think I'll have a problem with this one.
Yea that guy looks like a ninja with a shotgun lol. Thanks for watching!
I am looking at ati tactical stocks for my new shooter, seen some great stuff for not too much. Wanted a scope rail receiver cover and a foregrip and this badass universal bipod that is also wire cutters. Trouble is getting what I want and keeping the bayonet.
Maybe make a video of shooting it? Nice video but want to make sure it doesn't cheek slap like Knox.
omalley16 1 month ago
@omalley16 I have several shooting videos on my channel where I'm using this stock. Its freaking great. I cannot say enough good about it and have tried them all.
Glockwork9 1 month ago
@Glockwork9
Does it come with mounting hardwear? How is the Length of Pull compared to a stock 870 stock?
TheMango121 4 weeks ago
@TheMango121 From the trigger to the end of the stock is 12.5" (1ft and 1/2in) It comes with a few different sling mounting options. The only thing they don't come with is the adapter for a single point sling.
Glockwork9 3 weeks ago
@Glockwork9
So they come with the hardware to install it right?
TheMango121 3 weeks ago
@TheMango121 They sure do.
Glockwork9 3 weeks ago
Nice vid. It is designed after the benelli with a shorter length of pull in mind. I have the stock with the "cheek riser" on my duty 870p. Without the limb saver I got mine for about $110. Have the one point sling loop and love it. Replaced my Knoxx stock cause I was having issues with surefire beating hell out of left hand when it traveled 2 +/- inches every shot. LOVE THIS STOCK!
txcabbie03 2 months ago
@txcabbie03 I love this stock myself. I haven't tried the cheek riser myself but can say that it works well how it is for me. I have a few videos up where I'm shooting slugs at 80 and 120 yards. This stock just makes it that much easier. I like solid stocks so I stayed away from the knoxx set up.
Glockwork9 2 months ago
Just picked one up the other day... makes the gun just so much nicer.
HammeredAndHorny 2 months ago
@HammeredAndHorny There great stocks! I love mine!
Glockwork9 2 months ago
@Glockwork9 After I put it on, I felt like a kid... couldn't put it down. I can't wait to shoot it.
HammeredAndHorny 2 months ago
@HammeredAndHorny Don't feel bad I do the same thing.
Glockwork9 2 months ago
Finally, The perfect stock. I've been waiting for something like this for years. Ordered it up after watching this video through brownells. Thanks for the video man.
milspec28 3 months ago
@milspec28 No doubt! This thing is freaking great. I have used it hard and have no complaints at all. Sorry about the video. I didn't think it would be one to get watched or I would have made it a little better. Thanks man!
Glockwork9 3 months ago
whats the length of pull on the stock?
garrettzkool63 4 months ago
@garrettzkool63 From the trigger to the end of the stock is 12.5" (1ft and 1/2in)
Glockwork9 4 months ago
@Glockwork9 sweet but i dont think they make them for mossbergs
garrettzkool63 4 months ago
lol @ pussy pad
kaygeeboi 5 months ago
@kaygeeboi Thats right and I love it.
Glockwork9 4 months ago
@Glockwork9 I need me a stock like that, I still got my original stock. I can't decide which one to get.
kaygeeboi 4 months ago
@kaygeeboi If you want a fixed stock for your shotgun this one is as good as it gets. I cannot say enough good about it. I love it.
Glockwork9 4 months ago
@Glockwork9 Thanks for the advice, to be honest I have more trust in Mesa Tactical than ATI
kaygeeboi 4 months ago
@kaygeeboi I have had 2 ATI stocks and they where not really bad but kinda felt generic. Its hard to explain. This one is the real deal. I have given it pure hell too. I carry my shotgun a lot and this stock fit the bill. I'm going to do a video soon of my entire set up and why. Its simple but rugged.
Glockwork9 4 months ago
@Glockwork9 Yeah point taken. Whatever you do don't get the Tacstar Side Saddle on the 870, I Put 100+ rounds in it and fell apart, I should of got the Mesa Tactical Side Saddle.
kaygeeboi 4 months ago
thanks for making this video! i could find any info on it ether
djgunner258 6 months ago
@djgunner258 I have used it a lot sense I made this video and cannot say enough good about it. The only thing that might be an issue is if you get the limbsaver option it sticks to clothing. Thanks for watching!
Glockwork9 6 months ago
@Glockwork9
i have a midwest industries silng adapter that i use on my current setup (the adapter that fits between the receiver and stock). will i be able to use this part with the urbino?
rottiemillie 4 months ago in playlist Оружие
@rottiemillie I also have a sling adapter that I used in a video with this stock. The one I have is made by "the mako group" . "The MAKO Group tactical sling adapter for Remington 870" is the name of the video. If you want to use a sling mount you can but they sell a piece that fits on this stock where the receiver meets up. There isn't a lot of info about there products but I have several and there all great quality.
Glockwork9 4 months ago
Thanks this was very helpful. Looks sweet to! Better than the speed feed II
slicksassault 6 months ago
@slicksassault Sense making this video I have used it a lot and cannot say enough good about it. Thanks!
Glockwork9 6 months ago
I need to pick up one of these... been meaning to ever since they came out.
HammeredAndHorny 6 months ago
@HammeredAndHorny I highly recommend this stock.
Glockwork9 6 months ago
Ja-Ja Nice Remington (with the pussy pad). All Remingtons come with pussy pads? That stock is shorter than the one it comes with even though it's got... you know ... the pussy pad.
LOL Nice stock dude just messin with ya!!
GlockPunisher1 7 months ago
@GlockPunisher1 Damn right! You cannot have your pussy hurting when out shooting lol.
Glockwork9 7 months ago
@Glockwork9 LMAO I guess not dude! That would be a terrible thing to happen .........
GlockPunisher1 7 months ago
Very nice! I've been looking for an option with a fixed pistol grip stock. Looks like it would fit the bill.
noBuzzkillin 7 months ago
@noBuzzkillin I like it a lot. If you don't want a telescoping stock this is a great choice. If I had to do it all over again I would buy the same one. Thanks for watching!
Glockwork9 7 months ago
Very nice! Ive been looking for a
noBuzzkillin 7 months ago
How is the sight picture of the bead with that stock?
TheGunEnthusiast67 7 months ago
@TheGunEnthusiast67 It is great. It feels very natural. The stock has a weird angle that lift the gun up a little and it makes a big difference. The first few shots where slugs from 30 to 40 yards and they where dead on. I had a benelli with ghost ring sights and I can hit a target just as good with the bead on this 870.
Glockwork9 7 months ago
@Glockwork9 Good to hear. I have a couple of aftermarket stocks for mine and they never line up with the bead, they are always to high. Like you say, the angle of that one looks different from others I've seen.
TheGunEnthusiast67 7 months ago
sweet man! It looks awesome!
mgonza29 7 months ago
@mgonza29 Thanks I love it! I don't think I'll break it ether lol. I'll let you try it out soon. Take care man!
Glockwork9 7 months ago
Thanks for the upload. Been looking for something to spruce up my 870 Tactical Express for some time now. I've long thought that a pistol grip really helps with the controls on the 870 (but not the 590). It's a bit pricey, but you get what you pay for. Might have to look for the shell holder.
(That picture on the box is also kinda funny)
MegaGevehr 7 months ago
@MegaGevehr No problem at all. I just wanted a good solid stock with a pistol grip that I liked. I'm very happy with it. The shell holder they have is really nice too. I manage to break the unbreakable so I keep things simple. I don't think I'll have a problem with this one.
Yea that guy looks like a ninja with a shotgun lol. Thanks for watching!
Glockwork9 7 months ago
I am looking at ati tactical stocks for my new shooter, seen some great stuff for not too much. Wanted a scope rail receiver cover and a foregrip and this badass universal bipod that is also wire cutters. Trouble is getting what I want and keeping the bayonet.
LeonRFpoa 7 months ago
@LeonRFpoa Yea the bayonet is a must on a sks. A bipod that cuts wire? that is badass! I have to see that.
Glockwork9 7 months ago