Added: 8 months ago
From: 13plaonas2
Views: 116,340
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (437)

Sign In or Sign Up now to post a comment!
  • yall are putting it on way to thick and it chips off so much easier, and trust me i mod them for the fun of it so im pretty aware of wut i do

  • lord god almighty, yall are noobs lol, sand it first with fine sand paper so the paint will stick better i keep my freaking paint can a long distance from my cases and i lightly cover them and bout 30 mins to an hour i put on another coat each time till i get bout 5 coats

  • your too close to it stand bak

  • "Do not attempt to cover it in one coat of paint"... kid attempts to cover it in one coat of paint. Way to go.

  • Noch beschissener machen kann man es nicht.

  • fucking retard!!!!!!!!!!!!

  • Garnoch gut... da fehlt ja alles... Grundierung? Füller?Silicon entferner? Anschleifen?Das hält von 12 bis mittag....

  • i'm gonna try it , not a joke .

  • dude than fling show the controller nobody cares about how bad u can spray that controller

  • @13plaonas2 READ THE SPRAY PAINT LABEL!!! "for best results hold can 1 foot away, do 2 light coats rather than 1 heavy, do short overlapping sprays." You did none of these things!

  • that song or what ever it was sucked!!!! Good job with the Spray piant but you should have sanded it first icky sticky controller.....But good job and ty for the info :D

  • Cool!

  • ok first of all you sand it so it doesnt get stick then you put primer down then you paint in rows and hold the can farther away then once its done drying put a clear coat on

  • Comment removed

  • TACTICAL MUTE INCOMING!!!!!!!!!!!!!!!!

  • be smart, sand that shit if you plan on doing this sticky icky controller...

  • bet that feels like SH!T, all sticky and what not...

  • u have to sand the controller first

  • i probably would have left it where it goes from orange to black

  • NİCE :)

    

  • lol, fail.esmalte para el mando como que no xddd al cabo del tiempo se pelara y te rascaras la mano y te aras sangre xddd

  • wont your hands just were the piant off?

  • you need to sand it first... spraying paint on a smooth surface = bad Idea

  • youre using montana gold for a ps3 controller wtf is wrong with you use that to bomb

  • are u seriusly painting the buttons to!? tard.

  • u have to tape the holes ffs! that will be bad later..

  • u didnt sand it before you did it

  • i done mine and it looked nice, but i done it outside and it started raining :D now it has patches and doesnt work LOL

  • limb buttons are a pain in the ass to put back on

  • I painted mine, messed up. left it, now it looks like blood all over it. It looks pretty cool.

  • @TheNaiv

    What's wrong with it?

  • @TheNaiv I hope you used a condom :3

  • @53Spawn I hate how we have no clue what you are talking about until one of us finds the comment you resounded to.

  • crappy music for a crappy paint job.... well done..... i would put something over the written words and paint around it with a paint brush so it looks authentic

  • top comments are from doshes but do light spray pain 1-7 times every 15mins to gert an awesome colour

  • i'd rather just by a custom colored controller i dont wanna fuck mines up and have to buy another one.

  • The Music is shit!

  • My Dad knocked on my door asking if I was watching gay porn. He must have heard the song.

  • Yeah this looks like the wrong way to do it, I bet the final result was really shitty bubbly uneven surface right? Shouldn't put instructional videos of things you don't know how to do... Tisk tisk.

  • I have the same Montana Gold Orange Colour

  • who's justin bieber is that a girl

  • i painted mine black with red fade

  • Horrible Music D:

  • bad color choice, bad prep work, bad paint job....nothing about this video was right....next?

  • The cameraman should not get drunk while working

  • sick color bro

  • what a good cameraman

  • what the point of putting orange? black looks even better

  • wtf why would u put justin beiber? are u begging to get ur ass kicked?

  • @13plaonas2 can this work for xbox 360 controller?

  • This is a easy way

    Just paint it

    Let it dry

    make is smooth

    Then your done

  • This video sucks really JB ohh yeah its true you suck like your songs.

  • Yeah, he did it so wrong. But what did you expect? In the title says "by Justin Bieber"

  • u suck at spray painting!

  • Dude, really? you have a spray can and you dont know how to fucking use it?

    That is basic stuff, you hold your can 15-30 cm from you piece away and go over it with long movements.. So you dont get some really coloured spots and some where you can still see black..Just look on the internet how to fucking usw a can..-

  • SOrry dude bt u did forget alot of steps nd u did it way wrong. u didnt sand it, u didnt primer, and u didnt use clear coat on it thats wut brings out the color and wut makes it shine even more, bt everyone had dere own style bt its will b better if u try it how it is suppose to be and trust me they will come out even better then that

  • hes not justin bieber

  • @2flyy4it hahahahahah this name makes me laugh !!

  • HELLO DO U USE SPRAY PAINT OR WAT ??

  • AHAHAHAHAHAH, IDIOT

  • change the title to " How to do a shit job custom painting your ps3-ps2 controller "

  • let the finger on the mute, let the finger on the mute, let the finger on the mute!!!!

  • Children !

  • i love how we don't see the finished product, yeah this tutorial is correct.... fail

  • Did I just enter a gay bar?

  • @graffiti661 :DDDDDDDD

  • ahhh holy shit this is the fucking worst music ever

  • i was gonna watch this but then i seen justin bieber in the title

  • dude.., you suck when itt comes to painting.

  • DIY to the max

  • hahha your stupid.the paint will just peel right of because you didnt sand the original finish off

  • I bet that you are not justin beiber and why would you want to be???

  • I wanna kill myself because I know that table cloth exists

  • Dislike justine biebarage :D

  • dont like it just cos it was maked by justin bibergas

  • look at this idiot holding the paint can sideways and even upside down sometimes

    

  • omg! painting a ps3 controller whit montana gold, USE THIS FOR GRAFFITY MOTHERFUCKER!

  • Tu transpire apres ta le orange plain les mains

  • @Maspow24 Barely i think i can see the light

  • Colorware gets the job done, professionally ;-)

  • enjoy the paint on your finger after 6-7 hours of playing.

  • wtf i watched this vid about 10 times and NEVER realized that the title said "by just bieber" at the end of the title lmfao fail.

  • LOL i told my friend to just pt tape around the buttons lol!!! it worked :\

  • This music just made me kill myself Thumps Up!

  • orange? really?

  • Really montanna cans you dont know wtf you are doing but ok

  • Comment removed

  • you mother fucker! didnt even show me the end product You suck. Who picked that song? You owe me a good video now.

  • FUCKING ANNOYING FUCK MUSIC!!

  • 0:23 How to get paint on your mom's kitchen table

  • sand it first

  • umad?

  • that has to be the worst way of spraying

  • love it how he says cover it in a 'light mist' - he's holding it like 2cm away from the surface and pretty much drowning it!

  • LOL doesnt know how to spray

  • @C0ffee29 its individual xDDDDDD

  • you need prep you idiot a light scotch will do it and spray cans wtf mate buy a compressor and a spray gun and proper paint snm!

  • wrong!!!!!! first your sand it down the prime it and get your color after it dries the put a light coat 4 or 5 times every ten min. dumbass

  • @84multicam what grade of sandpaper would i have to have

  • @84multicam wrong!!!!!! your gay...

  • @84multicam When it comes to Primary color..I have to agree with you. But why you need spray the primary color the base color ? (Just wondering)

  • @84multicam what does sanding and priming mean...i want to paint my controller

  • @InfinateMatt sanding it is so that u remove the top layer of the controller so then you prime it with a surface primer u can get them at any hobby store easily then afterwards then you can paint it. 84multicam said to light coat 4 to 5 times that is for making the paint job look more solid. at every stage you spray u need to give it time to dry. when all is done u can finish it with a top coat clear color so it would protect the paint job from small scratches.

  • Dude, that is totally NOT how to custom paint a controller. you didnt even wash it or sand it down OR primer it. And you didnt hang it. And you put an uneven and too heavy coat on it. Bullshit

  • @Blinx1989 if your such a know it all why are you watching this

  • @Blinx1989 your face is bullshit.

  • It works on xbox too!

  • Thats what you consider a "light mist"?

  • Black is better...

  • @Tato69wc White women love the black meat!!

  • i would red scothbrite the controler first for adhesion.

    then spray 3M plastic adhesion promoter.

    lightly prime with dupont high-build primer (1 coat should do)

    scuff with grey scotchbrite.

    base/graphic (i used dupont, but that's cause thats what we have at work) with paintgun/airbrush.

    clear, just know your chemicals. hint: a laquer clearcoat is durable, but will melt your nice acrylic airbrushed graphic you worked so hard on as you spray it.

  • should do this, then dip it, and clear/seal it. would be nice

  • nice...but shouldn't you also but a gloss clear coat on it? ( i din't watch the whole vid...so if u did at the end my bad) and could u possibly use the spraypaint where it changes colors in the light like shown on some cars?

    otherwise, pretty good job!

  • wash your hands

  • i bet hes picked on at school for this!

  • did you use the whole can for 1 controler only?

  • htt p://yourpsncodes. com/?mn=37281

  • hah i do this except way more successfully ;D

  • you dont know how to use a spray can for shit

  • why the hell r people complaining about the fucking spray can

  • @Zombie47789 I'm not complaining but it would just wear off if you don't do it right.... using a spray can paint wont be a good choice

  • or you can by one and make secryer that it not will break:)

  • Watta Waste of a perfectly good MOntana..

  • Watta Waste of a perfectly good MOntana..

  • Would be cool for halflife.

    :)

  • what kinda gay ass music is this?!..sounds like something that would be played in a gay bar or something!?

  • LOVE MONTANA SPRAYCANS <3

  • wtf why is there so many haters saying he can't spray-paint.. WTF. you hold the can, and push the fucking button.. there you can now spray-paint just like anyone else.. geez

  • shuda left the bottom black

  • ClEARCOAT!

  • you cant spray paint for shit,

  • theres more fucking paint on the paper....

  • fucking keep the camera still damn

  • Let's see how it crust in a couple of weeks with no sand paper.. Lmao ! No sand paper= Paint won't stick in the plastic controller..

  • you suck with spray paint...

  • If that was me and finished spraying,I would be like "Wheres the Start button".

  • nice music :D

  • Not tryin to be a smart ass but you should lightly sand it first, wipe it down with laquer thinner or alcohol and then cover it with adhesion promoter and then primer, then paint, then clear coat. And dont paint like this guy, go in even strips or lines about 6-12" away and in light coats, if you paint in blotches it'll make runs way easier and then you're fucked unless you use base, non-metallic paint, then you can buff or sand the runs out. If you want it to last. Theres my rant for today

  • Comment removed

  • i tried this, then i punched myself in the head for being a total fuckin idiot

  • Reasons to spay-paint your PS3 controller;

    -Give it a distinct smell

    -Let it crust in a couple of months to give it a rough exterior

  • @torturelabs rough exterior= More grip :P

  • bet its come right off the paint has nothing to stick too

  • i'd change the x o square and triangle buttons around :p

  • My only reaction to that is... Do you fucking think that you making us learn something? Like, I don't think anybody here doesn't know how to use a spray can to paint a controller. It's like doing a video to show us how to piss.

  • Result?

  • Nice and epic!

  • TACTICAL MUTE INBOUND!!!!

    

  • so many fails here .... 1) white kid with spray can 2) no mask 3) white kid with spray can 4) holding the can upside down 5) white kid with spray can 6) un even coats 7) white kid with a spray can 8) not hanging with a string 9) white kid with a spray can 10) ugly ass colors to combine and last but not least white kid with a spray can
  • @Mr1stproject your mum is a white kid with a spray can

  • @MrCockSlut Doesn't even make sense..

  • @CrazyRapzter MATE WHO THE FUCK ARE YOU I WASNT TAlkin to you stay out of it

  • @Mr1stproject So it's a white kid with a spray can?

  • @Mr1stproject Btw that made me laugh so much hahahahaha!

  • @Mr1stproject You Racist?

  • @Mr1stproject FUCK YOU RACIST NIGGER (not racist, just mad.)

  • @Mr1stproject hes just a kid, take a chill.....hes outside .needs no mask ,its a sweet color...and OMG...hes white! come on bro

  • @Mr1stproject so many fails here .... 1) must be a nigger comenting 2) masks are for pussys 3) must be a niqqer comenting 4) its cuz of the camera 5) must be a niqqa comenting 6) that may be soo 7) must be a negro comenting 8) dont need to hang with a string fag 9) mus be sum niqqa writin 10) if he likes em go fuck your self fuckin minority

  • @richnjeanie must be a racist commenting

  • @richnjeanie basically you both are racist dumasses lol

  • @richnjeanie hahah mad??

  • @Mr1stproject racist

  • @Mr1stproject Fucking nigger or wetback... Fuck off

  • @Mr1stproject just one problem with you, poor mexican with computer. do your yard work make a penny for your burrito. poor, fat fuck.

  • @But1kicker one comment o wait iforgot it o yea FUCK YOU

  • @Mr1stproject racist

  • Now listen buddy if you wanna be racist fine yes i agree no mask or safety but "White Kid" if you make a video like that then the comments will be like "Black Man".

  • @Mr1stproject You got any problem with white people?