No engine that I know of was made to completely burn any fuel at 100%. When you blow something up completely you get complete combustion! More Heat happens.
It's changing the Spark itself but not the timing of the engine belt per say.... It needs to be photographed and or video taped with a Oscope hooked up as it's steady and sped up along with a Volt tester to get readings :)
So In a 2 cycle it tries to over come the heat because that;'s how it cools and lubricates along with air flow. 4 cycle is a bit different water cooled and oil floats in and around it.
Turning the wire around the Pen means you have how many turns = 4-8 or 6-9 turns around the pen counting the full loops not the half end ones. you can use a screw driver ,or what ever you want. Take a wire and turning/spining it around a screwdriver by hand and pulling both end through the middle inside of the coil and out each end. strip both ends! bend as you want to make the ends of the wire work for you.
What do you think is going on? How could it make the engine need more oil?
tjgame2 3 years ago
No engine that I know of was made to completely burn any fuel at 100%. When you blow something up completely you get complete combustion! More Heat happens.
rainmanp7 3 years ago
You think it's something like the coil is making a multi spark per cycle or changing the timing a little.
Wounder if its making the engine more efficent? You have to be changing something if the heat is different right?
tjgame2 3 years ago
It's changing the Spark itself but not the timing of the engine belt per say.... It needs to be photographed and or video taped with a Oscope hooked up as it's steady and sped up along with a Volt tester to get readings :)
rainmanp7 3 years ago
No I mean ignition timing, would'nt it have to slow it just a fraction , just longer plug wire's have a tiny effect.
tjgame2 3 years ago
So In a 2 cycle it tries to over come the heat because that;'s how it cools and lubricates along with air flow. 4 cycle is a bit different water cooled and oil floats in and around it.
rainmanp7 3 years ago
Turning the wire around the Pen means you have how many turns = 4-8 or 6-9 turns around the pen counting the full loops not the half end ones. you can use a screw driver ,or what ever you want. Take a wire and turning/spining it around a screwdriver by hand and pulling both end through the middle inside of the coil and out each end. strip both ends! bend as you want to make the ends of the wire work for you.
rainmanp7 3 years ago
what do you mean by "4-8 wire turns" ?
davidrrrd 3 years ago
Turns means how many times you have wrapped the wire around something. Like a Screw driver ,but 8 turns work very well.
rainmanp7 3 years ago
Please find out what you can about this. Any copper wire will do. I need more information on this thank you.
rainmanp7 3 years ago