Multiplex Twin Star 2 brushless with landing gear

[VVVladVVV]

За самолёт 5, за съёмку 3!

[inveritae]

Hallo! Verratest mir von wem das Lied ist? Hab mir das Video jetzt ein paar mal angesehen deswegen^^ Holm und Rippenbruch! :)

[skyforceflightmodels]

This Life von Drowning Pool

[petrospetridis2]

Nice flight.What is the title of the song plz?

[nicenice1212]

WTF... A very nice place to fly.

Great flying to

[BIH007]

How do you get landings gear with?...

:-D

[annihil8ted]

great flight. you have insane skill to avoid that near crash on take off and land on that narrow strip. I have landing gears but if i turn too fast, the whole plane tips. Have you experienced anything like that?

[skyforceflightmodels]

Could either be that your C.G. has moved too far with the landing gear or the whole flying weight is too high. Justify your C.G. and if that doesn´t help, reduce travel of elevator.

[annihil8ted]

I'm sorry i wasn't clear. What i meant, when taxing, if i turn too fast, that whole plane tips. Have you experienced this? It can't be the CG because that would affect my flight characteristic and im flying fine.

[skyforceflightmodels]

ok, that is an usual thing. Landing gears are simply not ment for fast turnings on ground ;-)

[nialaxela]

gute Flug

was fur brushless Motor benutzen Sie und welche Luftschrauben,Danke! alain

[jwalkermsg5566]

May not work, I hollowed out the nose and put the camera there. Also 2 wooden dowels to hold rubberbands to secure camera . I might make it a steerable tail dragger. Thanks for the ideas.

Lee

[jwalkermsg5566]

Good flight what landing gear did you add to the plane ? Looks like the right scale. I have 3 TS2 with the BL motors and 2s 4270 li-po. It carrys the Aiptek DVC very well. I also fly FPV using a wireless setup. I would like to add wheels if I can find a fit that nice.

Thanks for any help ....

Lee

[skyforceflightmodels]

I used 3mm steel wire and bended it into the right shape. The main landing gear consists of two parts and is fixed deeply using hot glue. For the front steering gear I used two plastic plates in- and outside the fuselage and drilled a hole through, put the front gear trough and fixed by two wheel stoppers. Inside the gear is connected to the rudder servo by a 2mm steel wire and a servo arm mounted on the front gear wire using a wheel stopper and a long screw in it.

Hope that helped you a bit.

[hisdaf]

Very nice and good flight!

Can you tell me your setup ? (which motor ?..)