Throttle setup made easy

[Fearlessfront]

Nice work! Its simple!

[GTA1GP]

@pele80015 can you tell me where you got your air intake?

[slim90805]

I can get a header and a sprocket there to

[pele80015]

@slim90805

You probably can. If one shop doesn't have it just try another.

[slim90805]

Were can I get a air filter at

[pele80015]

@slim90805

any kart racing shop

[Scootertuner1000]

You took the governor arm off, did you also open the engine to take the internals out?

[pele80015]

@Scootertuner1000

yea, i was running it up with 18lb springs in the 5500 rpm range, no billet aftermarket parts. 

[Scootertuner1000]

@pele80015 I did the same thing. I put the engine in an old CZ trail bike. With a Torque a verter it pulled an easy 60mph (12 front sprocket, 60 rear 420 chain, 18" rear wheel. Went really well. Never had a problem with anything breaking.

[kadsjr]

lush engine man

[pele80015]

@kadsjr

lots of fun playing with these engines, thanks.

[balak121]

u actually dont need a return spring on the throttle. just back the nut that holds that throttle arm out a little bit so that it moves easely and so that the arm doesnt wiggle.

[pele80015]

@balak121

i wanted a full positive throttle response. It worked well even when the motor was setup belt driven.

[impossiable125]

where did u buy the throttle setup. and how much. was it

[pele80015]

@impossiable125

I pretty much used what was on the engine, but I added an extra spring and a little L bracket. I used two springs instead of one.

[savageflux]

how well did it work 4 u im thinking about doing it

[pele80015]

@savageflux

on gravity feed it worked great

[gaspowerrules]

@pele80015 r thees motors reliable on ur mini bike

[pele80015]

@gaspowerrules

for the price very reliable. Can't go wrong.

[gaspowerrules]

@pele80015 ty i just bot 1 4 my mini bike

[savageflux]

is your fuel system gravity fed i see u dont have a fuel pump

[pele80015]

@savageflux

at that time it was

[92rs25th]

@pele80015 how do you adjust the idle mixture on these motors?

[pele80015]

@92rs25th

the idle is the black screw that rest against the arm that opens the butterfly. the screw acts like a stop. turn it in or out to adjust your idle. The air fuel mixture is the little screw with a black cap. If you want more help feel free to shoot me a pm.. Hope this helps.

[ATV11bbbbbbbbbbb]

is that the stock carb

[pele80015]

@ATV11bbbbbbbbbbb

it sure is

[pele80015]

@ATV11bbbbbbbbbbb

Yes it's a stock carb that has been rejetted.

[metalsnak6]

where did you get that air filter set up? i wanna put one on my mini bike im already getting a candy cane exhaust for it

[pele80015]

@metalsnak6

can't remember, but most kart shops will have it.

[MrSkidoomxz]

there is a easer why to set it up

[FitRider420]

whatd you do with the choke lever when adding the air filter?

[pele80015]

@FitRider420 take it off put it in my pocket and treat it as a key..Lots of guys drill and tap it, just use whatever screws you may have handy and be careful when you do it.

[4autobike]

ahhh very nice. I like it !!!!

[pele80015]

These little engines make great part time projects. Glad you liked it.