i am from holland and i want to buy a kyosho mini z but i want to buy some stuff to make it faster but i dont now what what is what does a hop up and such of things
@hiitzmike im pretty sure hes just playin with him and pacing him thats all...just for fun..anyone who races nows this just by watching the damn video...gab
Xmods wouldn't fare very well, I have F1s and Xmods, the only situation where an Xmod would come out on top would be on a surface like a slippery wooden floor, and only if the xmod had the 4wd fitted, but then the Kyosho AWD car is better than a 4wd Xmod.
@Dawnofwar13 stock would get destroyed, a $250 xmod with the right upgrades may have a chance, especially if the F1 sandbagged like it does in this video
No doubt the dNano is good but the F1 driver had loads of gain on the straights. Then when he eventually closed the gap, he also started to loose that gain he had on the straights. Not saying it's a fix, but he was deffo holding back. You can hear him coasting more towards the end - almost as if he was afraid to pass... He had two or three chances on the straight to seal the deal!
That 1/43 scale is tiny but fast... I can see, however, that the F1 is just playing with it. Kudos to both drivers for not making a mistake.. good driving!
me and my dad are buying mini-z's for christmas. we a getting mr-02 mm chassis he wants a ford gt and im getting a mclaren f1. they are both 98mm autoscales, so will modding chassis be neccessary? pm me if possible
the chassis are ASF to... we ordered one to start off, mine, i got a ASFmr-02 mm with a red ferrari 360 gtc autoscale (without the stickers and junk, i hate that)
Check out my newest vid I'm selling an entire bundle of xmods 150$
skylinegtr2424 3 weeks ago
This has been flagged as spam show
far more exciting than a real F1 race
juansyttho 9 months ago
i am from holland and i want to buy a kyosho mini z but i want to buy some stuff to make it faster but i dont now what what is what does a hop up and such of things
bliephoofd 10 months ago
@xekintiger F1
ub0211042 1 year ago
@ Dawnifwar13 an Xmods would be comparable to a Mini Z but the MiniZs are still a much higher quality better performing car.
evoxmrdude 1 year ago
cool
iWhO3Ls3 1 year ago
lol good drivers
fatmanimpreza 1 year ago
very exiting vidio. i realy fid that a race.. good driving nice track... .......
smallpebble 1 year ago
that was intense good sh*t
ClutchCobraKID1 1 year ago
The f1 could pass but you can hear his motor revs and rpms so why doesent he just pass
the dnano? I mean he just taping the throtle like a wuss.
I could do better trust me.
hiitzmike 1 year ago
@hiitzmike im pretty sure hes just playin with him and pacing him thats all...just for fun..anyone who races nows this just by watching the damn video...gab
rockhopperz93xeedmax 1 year ago
@hiitzmike Maybe he's backing off because it's a small track and if he floors it he won't enough time to react.
w4rr10r11 1 year ago
the f1 is faster going strait but the dnano is faster in curves
galenator123 1 year ago
is the f1 trying to pass? he seems to be confined by the track.
track is sweet, needs a longer faster sweeper though imo.
jtet420 1 year ago
hello i'm french.How much it cost?good bye
florentusss 2 years ago
around USD220 ready to run :)
ub0211042 2 years ago
very nice!
sunnycyk 2 years ago
Thats one super cool track!!
I better start building one for my cars soon..
RTiger18 2 years ago
thanks...
ub0211042 2 years ago
how woould an xmod fare in this group?
Dawnofwar13 2 years ago
no idea...never have xmod around before
ub0211042 2 years ago
Xmods wouldn't fare very well, I have F1s and Xmods, the only situation where an Xmod would come out on top would be on a surface like a slippery wooden floor, and only if the xmod had the 4wd fitted, but then the Kyosho AWD car is better than a 4wd Xmod.
Narrowshrimp 2 years ago
wouldnt be able to keep up with either dude they dont have the durability like these have or steering quality hope i hlped
rayclauson 2 years ago
it would have to be an extreme xmod to keep pace with these. mini zs are very fast.
Imprezaman555 2 years ago
wouldn't even be a close race. xmods would never be able to keep up with a mini-z.
jamiekenta 2 years ago
@Dawnofwar13 stock would get destroyed, a $250 xmod with the right upgrades may have a chance, especially if the F1 sandbagged like it does in this video
Jace1283xmod 1 year ago
@Dawnofwar13 hahaha noooo way
rockhopperz93xeedmax 1 year ago
Very good video, and very good drive!
minizchannel 2 years ago
who wins???
pk3rb0y 2 years ago 2
the F1 : )
ub0211042 2 years ago
It sounds like that F1 is really holding back holding back :l
ThermalOverload 2 years ago
Looks for my films.
aleixdc 2 years ago
if you want to drift,g et the MA-010, i have it and it rocks! :)
it is both a drift and a race car, though it is harder than the MR-02 to setup for race, once you have perfected it, its much better than the MR02 :)
add1ct3ddd 2 years ago
go ebay...will cost around USD220
ub0211042 2 years ago
where did you get it Ö, and how much?
Saggmos95 2 years ago
nope, it's 2WD same as MR-02 so impossible to drift
ub0211042 2 years ago
DNano can drift like mini z?
risingdragon81 2 years ago
Looks great. Cool track !!!
InTheFleshForever 2 years ago
whats a dnano?
elefantboys 2 years ago
much easyer for the smaill car to drive on the track
marton1111 2 years ago
it's kinda embarrasing that a smaller rc car defeats an f1 rc... O.O
NoloPasoro01 2 years ago
u can just tell that the lead car has a HELL ova lot more power cuz its not goin all out with the throttle
mlpko 2 years ago
Got about 7 mini-z F1's over here but no-one to drive with LOL. :P
stevegek 2 years ago
ok anyone who has ever seen an F1 in person, and especially anyone who owns an F1, knows they're way faster than that. the guy was holding back
HVAC25000 2 years ago
No doubt the dNano is good but the F1 driver had loads of gain on the straights. Then when he eventually closed the gap, he also started to loose that gain he had on the straights. Not saying it's a fix, but he was deffo holding back. You can hear him coasting more towards the end - almost as if he was afraid to pass... He had two or three chances on the straight to seal the deal!
Programmers 2 years ago
Cmon Hobbytown, hurry up with D's already!
Skv0ra 2 years ago
If I had one of these, my dog will never catch up to this...
Cellwelder 2 years ago
what web site or store that has a website did u get the kyosho mini-z from because i realy ount 1???
plzz reply!!
jiminator9 2 years ago
u can always try ebay
ub0211042 2 years ago
HobbyTown USA stores have a US exclusive right now. You can buy the imported ones but usually at a premium price.
1MillerTime 2 years ago
1. copy and past to 8 other videos
2. look at your profile backround
alazetadel0al9 2 years ago
Does your F1 have a ball diff? What brand?
r56mini 2 years ago
yes, kyosho balldiff
ub0211042 2 years ago
in a drag race which one will win?
93661902 3 years ago
if to compare both car in the vid the F1 will win...the dnano is still stock whereby F1 is modified
ub0211042 3 years ago
does that means that if u jsut modify the dnano it will go faster than the mini z?
93661902 3 years ago
nope coz u can hop up the mini-z with hot motor available but only xspeed currently available for dnano
ub0211042 3 years ago
That 1/43 scale is tiny but fast... I can see, however, that the F1 is just playing with it. Kudos to both drivers for not making a mistake.. good driving!
r56mini 3 years ago
the dnano just ate the f1 alive
ingz1993 3 years ago
wrong, turn the volume on, the F1 is sandbagging(holding back) really bad, it would blow the dnano away if he was trying
Jace1283xmod 3 years ago 2
Woah! Great race. Don't make a mistake of the F1 will eat you! X-D
wordreet 3 years ago
it kicked the min-z but lol! i want one !!! how much?
vroooom2243 3 years ago
i need to know what a kyosho dnano is
TeamAlphaRacing 3 years ago
it's a 1/43 scale hobby grade RC which runs on single cell li-ion and with 2.4ghz radio...
ub0211042 3 years ago
how big is it compared to a mini z mr 02
TeamAlphaRacing 3 years ago
it's almost half the size
ub0211042 3 years ago
so it really is not comparable to the mini z man and it was keeping pace with an f1
TeamAlphaRacing 3 years ago
it's a great car...and that was bone stock...
ub0211042 3 years ago
how long does it charge and did the f1 have any mods
TeamAlphaRacing 3 years ago
it full charge in about 30min and the F1 is with kyosho xspeed motor.
ub0211042 3 years ago
Wow! great race
fluenty9 3 years ago
me and my dad are buying mini-z's for christmas. we a getting mr-02 mm chassis he wants a ford gt and im getting a mclaren f1. they are both 98mm autoscales, so will modding chassis be neccessary? pm me if possible
SneakkyZ 3 years ago
for a start, just play it stock out of the box. If u can handle the car well and intend to play on track then only u start to mod.
first mod should be the bearings, balldiff and tires go for kyosho's original
ub0211042 3 years ago
so no mods are neccessary for slappin on a 98mm autoscale? if there is, what are they?
SneakkyZ 3 years ago
edit to my post above:
the chassis are ASF to... we ordered one to start off, mine, i got a ASFmr-02 mm with a red ferrari 360 gtc autoscale (without the stickers and junk, i hate that)
SneakkyZ 3 years ago
if u hv ASF chassis kit then u should be able to use both 94mm and 98mm autoscale...360GTC is 94mm.
ASF chassis kit comes with both Rear Mount (RM) and Mid Mound (MM) type of motor mount.
ub0211042 3 years ago
THAT IS STOCK?!
WOW
d360 3 years ago
yeap stock, even the tires are stock too...
ub0211042 3 years ago
the F1 is sandbagging wicked bad
Jace1283xmod 3 years ago
135euros
royalfighter94 3 years ago
Are you kidding me! The Dnano worth every $250+
will3kgt 3 years ago
yeap it's worth the money spent
ub0211042 3 years ago