Shicoh 2.8mm Motor Test

[mestre05dongue]

this engine is a cell phone? appliance if you think that this little engine? thanks

[dSbQ8]

now they Can Make a (( spaying FLAY ))

[kimmybelgrade]

battery volts?

[Kwago1]

Can anyone tell me where I can buy one? And can anyone tell me if this is a DC motor? Could anyone also please explain to me why I can't find something this small in any stores in the US except online in China?

[TheNecrosisx]

@Kwago1

Go pull apart a small fucing infared RC car, these motors are a dime a dozen, but are weak as piss.

[ishouldplayzelda]

dude that's badass

[weekofhorror]

WHERE "S THE POWER SUPPLY ?

this comment system is the FRIGGIN WORST !!!!!!!!!!!!!!!!!!!!!! YOUTUBE FIXIT

[weekofhorror]

WHERE "S THE POWER SUPPLY ?

[grpassionavion]

Bonjour,

j'utilise déjà des moteurs diamètre 4 mm ou je peux acheter en Europe des moteurs de diamètre 2,8 mm SVP prix et références.Where can i get motors diam.2,8 mm price and item and address in Europe or USA Thanks

[kartz4fun]

put that on a paper plane lol

[aaaaaerospace]

hi... can u please tel the weight of that motor(with and without propeller)? reply pls

[Rayrockny]

Now attach that to paper airplane and set it free..

[maliciousmushroom]

@Rayrockny paper would be too heavy. They are making planes that are about 1/2 a gram.

[benjorgensen1]

is that whole thing in your fingers an independant rc pickup and battery? if so thats increadible!! i want to build a very tiny helicoptor with something like that.

[zcg3]

Please stop it! It's making me horny...

[Fokysnik2]

Applause for making such a small propeller!!!

[thiagov6123]

cell phone motors are great.

[bribri9910]

tiny helicoper blade

[mit5oner]

so cute lol

[Sizuykeks]

I have one in my mobile. It's for vibrate. ;)

[Tombking2]

@Sizuykeks I hope you aren't a guy..

[Sizuykeks]

@Tombking2 Well, you must have really old mobile phone, if it has no vibration.

[nitrodamuz]

nice micro motor

[blueeyes2015]

is that .1 of a watt?

[dollylu1]

silentsniper441 you can take off the weight off by getting some pliers and placing them on the edges of the weight and getting a thin paper clip or something like that and placing it on the hole in the middle of the counter weight were the shaft goes in and hammering it until the motor comes off. it helps if someone gets the pliers and someone else hammers it.

[DJALIENPHANTOM]

lol this is funny in a dumb way

[Berijs]

waaw :) cool

[cooldude76pl]

amazing

[silentsniper441]

how do you get the wieght of a pager motor?

[WeAreOne26]

Is that 1000 rpm for each 1 volt of imput power??

[gauravdawg]

how much volt does it require

[TheOne272]

At what RPM rate does it spin?

[Keanudabeast]

where did you get the propeller from

[superheroextreme]

if u attach alittle big fan to it ,it would fly

[MrHulaish]

i think it is from a heli smalll heli

[PaintPunk09]

read despription -- its from a pager

@ MrHulashi

[r1b8]

looks like its about 2 rip right out of your hand

[uday932]

how you get it

[Inklebonker1]

what is it for?

[TheLaurencekid]

i have one of them it can run off a small dead button cell

[DRNEGOLICIS]

for some reason i was laughing pretty hard at this comment

[JDO658]

I took one of these out of an old mobile i had. and hooked it up to a small, elastic band powered plane, Took about a week of tweeking. now flies on a push switch (Push, on, let go, off) got can power it well and flies a good 100 meters.

[IST314]

Do u know that, they use theese motosr in cell phones to vibrate when someone calls u. :)

[PARWIG410]

They also use them in pagers for the exact same purpose. Thats why they're called "pager motors"

[killerofporn]

i took big one from my broken heli and it can power up my hot wheels to go 10mph

[issr7]

Where did you get that propeller ? Looks homemade....How did you make it ?

[KatzOhki]

I have a handful of various motors that are pretty similar, but I can't get the offset weight off so they won't be "vibrator" motors anymore.

I had the same idea to attach a propeller.

[bestamerica]

is this motor with 2 brushes or brushless

[MoRRisoNRisiN]

looks brushed to me

[bestamerica]

brush is 2 wires,,,

brushless is 3 wires

[PROFX2009]

It is with brushes; Ihave got the same motor and pager

[sapdog12]

ooooook

[QwAdr0x256]

I love small things =)

[sethborneman123]

thats what she said, not to me though :D

[comanche119]

and this is awesome..............how?

[MIGUEL2005LIMA]

VERY PRETTY HAND MADE PROPELLER!

[ktosi11]

I have one of this phone motors but after a few second run its very hot...

[AlchemistHawk]

Paste my comment reply on your desktop so you wont do this crap anymore... -_-

[coatduck]

now I would asume you have done this so I must ask, did anything at all happen to your channel?

[Imageofgodsl]

If you let go of it will it fly?? =p

[killerlad9]

how come it doesnt have a battery?

[speedstakerguy]

How come ur so dumb :)

[miniguitarpro99]

it does you can barely see it, its tiny

[derderpaintballguy]

sorry but your wrong.....your rite it has a battery...its not super small though....its under his thumb

[svlion1977]

nice motor. did you drop your phone or something

[bandinopla]

lol i got one of thouse motors from a broken phone xD

[JJutbalaJJ]

Nice servo motor.

I was testing the same thing a wile back. =)

[gokharol]

just a question... how did u do this?!

[laurelindon]

Hello dear brother what do you got there?

NOthing, NOthing, it's my cock in a square

Don't be silly i love you very much... tadadam tadadam

I guess i shouldn't touch... ^_^ your cock

[piegangsta]

The propeller is on right it will pull not push

[falcoperegrinus82]

The propeller is on backwards unless he wants a pusher motor

[Pujc]

What kind off motor are that , from cell phone , or else? 5/5 awesome lil :)

[variablestatus]

a propeller on this is what counts.  amazing for miniture aircraft. thanks for video. 5*'s

[me4u]

i had one of these motors and i connected it straight to a 1.5V batt. I think i burnt it out must have been too much current. What voltage and current are you using and have you got the circuit diagram for it. Thanks

[Cookie2734]

Is the little black thing next to the motor the reciver? It looks simple.

[cosminx2003]

i think this is the picoo-z tail motor, it's the same.

[ISLAM4THICKONES]

Yes looks same size, am sure manufacturers of mobile phones spured along the miniture model market and got extra business.

[DjinnJuggler]

The picoo-z tail is about 4x13 mm, this is smaller by quite a bit.

[AlchemistHawk]

it looks like it came out of a cell phone or a pager. its the vibrator motor

[MessiahsPassion]

Is it from that Bladestar kit?

[Imprezaman555]

is this for a penny plane? (not for competition obviously, wouldn't be allowed.

[manuelyveroforever]

from where is this motor??

i like has one

sorry my english

[padrinoel]

hey dude you know some English, that's good.

[albertoleyvatellez]

@padrinoel hahaha

[nathan82206]

@padrinoel what are you talking about?

[stillcrazy123]

it's from a pager's vibrator, just a propellor added instead of an offweight.

[alex4runner96]

hey ma man, have you seen those mini rc cars? i think is one of those little motors. do you want to built one plane like this one?

[rccarmadben]

no my m8 got a tiny rc car and its slitly bigger

[TheOneAndOnlyFink]

Your English is fine. You can get them out of older cell phones, pagers, or basically any small electronic device that has a vibrate function.

[calz91]

nice, how did you make the prop?

[NEEDCARS]

i like tits

[dumapies]

who made this doesn't

[sspoke]

would be good motor for a mini-rc plane/helicopter.

I've built a plane using a pager/beeper motor but this motor is 2 times smaller then that!

[chrisb000]

lol you finger sucks... lmfao

[MIKEHANMER]

come on man! that motor is like 2 years old, its fuckin massive, that motor is out of an phone or the RC hand held car

[mustangified]

where would one buy one of these?

[DarkKingOfGames]

Your Finger Sucks!!

[PinotGB]

it's strong?

[kakashy1997]

how i do than??i want now how do than motor

[TheDirtNinja]

Wow! You got some HUGE thumbs!

[rccarmadben]

haha big moter bigger thums

[paulius4LP]

Does it Flies?

[aus2045]

Because they are slow and boring and usually driven by old ladies to church.

[aus2045]

Cool - If i put that in my Honda Civic it might go a bit faster!

[USGiorgi]

wtf. why do people pick on Honda's? they are all so jealous.

[sitforbrains]

because hondas are slow and ugly. no one is jealous of someone who owns a civic

[USGiorgi]

i was talking about s2000 and if you call that slow or ugly than you have mental issues.

[sitforbrains]

kinda slow, ok looking but still gimme a real car. my cuda could beat a s2000

[USGiorgi]

lets see your cuda.

[ThaNorwegianDude]

lol

[maqueavelico1]

case when you think of a car you think of an honda is the example car,fast durable..

[baolinh111]

according the the law of physics, it actually would, If you stand on ur car and pee out, it would go slightly faster too

[checktwo2two]

well, assuming you ignore the air friction introduced by all that's sticking out of the sunroof...like your bare ass, and all the rest :^>

[rccarmadben]

yeh pee out backwards you will go faster but only by about o.oooooooooooooo1 mph

lol

and the one underneath

pee outer the boot

[captincaveman89]

IT SOUNDS LIKE WALL-E x3

[convicetNL]

cool dude,

[girrocks12345]

I bet he made the prop from a block of balsa wood ;)

[redmer9]

cool tnx

[redmer9]

where did u get that motor??

[paulie1982]

You can get them out of any mobile phone that vibrates. If you have an old phone get a screwdriver to it, the only thing is it has a counterbalance on the motor(thats how it makes the phone vibrate), you have to be careful taking the counterweight off as you could bend the shaft.

[coondogtheman1234]

that motor sounds like its burning up internally, and these motors are also used in those mini pocket zipzaps RC cars

[melin1uchiha]

nice howd u make the propellers? wat did u use? i make mine with a styrafoam plate.

[crookedtool]

Nice job.. how do you make a propeller like that? Did you shape it from a block?

[pharaohakhenaten]

I have it..the problem is it cant be used for a long period because of heat. It will get hot pretty fast.

[babr13]

put in your ass and turn on, you will fly. need no flight ticket save alot of money.

[JeeDee66]

RC helicopter *

[JeeDee66]

its a helicopter motor

[andrewmoe]

where did u get that from

[datzfast]

i got that motor from an 4 dollar vibrating

leg shaver disposable of course.

[rcbatti500]

smal propeller

[elmantis]

Hello. Could you please let me know how can I use a IR from a TV remote controller to do something like yours?

TY

[jakester555]

plz check my bot out called

my bristle bot

[dkjy94]

u didnt make the britsle bot!

[nightstunter]

i got it!

[pointless14]

does it hav a speed controller - sounds like it

[siva9783]

Is there a place to commercially buy the motor?

[siva9783]

do you know how to reduce the weight of the motor if so can you post a video of the same

[siddharth28in]

this type of motors are used for the vibration alert mode in mobile phones..can be used for a micro rc plane

[coondogtheman1234]

they use these motors in those little zipzaps RC cars

[Xertazer]

it's so tiny!

[ymi2b]

..that's what "she" said.

[Baldovino63]

OMG. It like perfect for a paper-plane. The weght is?

[legonoitall]

nothing until you load the battery. Use it for ammo in a custom BB gun ittl work great lol

[XxbombradierxX]

sounds like a mosquieto

[aquascummm]

Did you pirate the IR TX/RX, buy one (surplus?) or make your own?

[toko0131]

An IR TX/RX is also a work of its own.

[snak5]

it's an x-twin engine

[angrymonk55]

it's much smaller than an x-twin engine. those are 6mm OD, this is 2.8mm.

[tracmag]

That is a cool motor,did you invent it?

[toko0131]

No, a maker called SHICOH builds a prototype.

[tracmag]

What makes it spin?I once placed a propeller on my spinning disc and it worked.

[toko0131]

Its own infrared receiver is connected and it is operating by remote control from the infrared transmitter.

[SpyderMacFly]

That is TINY!