did you break that thing in before you fully throttled it, because it says fresh out of the box. Anyway nice bike man i'm gettin one wednesday or thursday
It means to loosen things up in the engine. When u 1st get it everything is tight. When u break it in ur makin the piston fit right into the piston sleeve. Thats y u should never nail it when u first get it brand new. Jus take it ¼ or ½ throttle a couple of tanks
You should ride it hard during a break in, 3/4 max, only after the engine has warmed up COMPLETELY. Taking it slow (staying in a small range of RPM) is the improper method of breaking in an engine.
This comment has received too many negative votesshow
You are a dumb ass. Why you think they say when u buy a brand new car keep it under 60mph? So u dont mess up the engine, you are dumb as hell!! If you ride hard for break-in you are going to damage the connecting rod and probably the crank too.
They say that because ignorant people like to rev their engines before a complete warm up. How is riding it 3/4 throttle going to damage the connecting rod/crank? Do you even know what happens during the break in process?
The worst thing anyone can do is to give advice on a topic they barely know anything about and act as if they have superior knowledge on that subject.
This comment has received too many negative votesshow
During break-in you do not supose to ride hard, you are supose to take it easy. You said " You should ride it hard during break-in". Listen up go to pg. 2 for comments and look at all of my comments. Oh yeah and I do know what break-in mean. If you read the comment on pg 2 the last one or pg 3 the first one it should tell you. Look for "SHAWEAGLEBOI" ok? Good.
By riding it hard, I don't mean full throttling. How do you wear in the piston rings to the cylinder surface without enough compression? How do you gain enough compression without a higher gas pressure? How do you gain a higher gas pressure without adding more gas; riding it hard? Riding it hard > more gas pressure > more compression > pistons seals wear into cylinder surface faster. I read your comments, you don't know anything about breaking in properly.
This comment has received too many negative votesshow
Yeah ok well buy nitro rc car and break it in your method and see what happens ok? You will destroy your rod and crank. You have no idea about break-in. Believe what you want to, I'm done talking about this. Oh yeah you have a cheap ass bike by the way. You paid about $279 or something like that? Those bikes are pure shit. Have a nice day.
I don't need a nitro R/C car, take a look at my Channel, I have 2 Pocket Bikes. The green one starts perfectly with the proper break-in method. Why are you comparing R/C car to a Pocket Bike anyways? They are made differently. All Cags are around 200-300 dollars, unless you buy the water-cooled 39cc Replica. All Cags are cheapass bikes, there's no alternative, so your comment was pointless.
If you can't show any contradictions in my previous explanation, then it means that your break-in method is incorrect. You are saying the same things as the beginning, "you will desotry your rod and crank." yet you never give any explanation for why this would be the outcome. Your argument does not contain any explanations or reasoning whatsoever, you're simply stating the same outcome over and over again. You should learn more about the topic before talking again.
This is all I'm going to say "Believe what you want to believe." I'm done with this break-in thing. All I'm saying is Don't go hard on it, gradually increase. I'm done so please leave me a lone.
is the hardware like brakes and everything like a dirt bike, like foot pedal for the back brake or is it just right brake is back and left is front...just wondering...thanxs
i have a question because i want to get one for christmas, does it come with 2 stroke oil and gas and is it already mixed, if it's not then please tell me how to mix it
ya you should be able to fit grown ups even ride them so u should fit fine im planing on getting a GP RSR if not a GP MX3 and im about a little shorter than you
so which site is better to order off of? usa-pocket-bikes or minipocketrockets???? im thinking about the gp mx3, is this a good bike or crap off these web sites?
minipocketrockets man i bought a blade the one next to the this one its fast i got a stage one performance kit for it tho i go i topped out 67 mph last week
Next time you start it up, IceOtterian, try taking it off it's stand, unless you already did, then disregard this message. We worked on ours for about an hour with no results until my brother suggested taking it off it's stand. We did, and after 2 pulls, it started right up. Good luck.
im gettin the same 1 on ur first run never go flat out it will mess it up on the fifth tank of gas u can do wat ever u want and ur first time u have 2 put 25:1 gas to 2 stroke oil mix
hey evry1 i am looking into buying a gp mx3 and i wa wondering if there high maintence and where to order them from. so just comment back and watch my videos!
No break in just go easy on it for a couple of tanks 25:1 fuel mix. Dont just let it sit there and idle you'll foul that shitty chinese spark plug even faster
hay i have the same one in blue the bad thing is i can never start it up i oways hafe to takethe spark plug off and pore regular gas into the engine then it will start up
you're not supposed to go max speed when u first get it if it hasnt been broken in
poopsack199 6 months ago
also my exaust pipe got a whole in it and the seat caught on fire.
asmartdude2009 9 months ago
how tall are yyu cuz im 5.6 am i too tall haha
SuPeRSwAga23 10 months ago
if motor is broke in then mix the gas and 2cycle oil 50 to 1 if new mix it 25 to 1 unitll you break in motor
theoneandonlydragon 1 year ago
did u break it in
kenneth11208 1 year ago
Comment removed
killerteddybear101 1 year ago
Comment removed
killerteddybear101 1 year ago
how much u way
brandon43743 1 year ago
what is the top speed
if you dont know u can put a g.p.s. on and run it and it will tell you the speed
i know it dont go 47+
eduardo97ist 1 year ago
Comment removed
killerteddybear101 1 year ago
you can tell your just one of those annoying little white kids in your neighborhood
Erick235100 1 year ago
one question how tall are u? just want to know to see how big it would be for me... or small
thatmatt15 1 year ago
your wheelies suck ass dude
199motofreak 1 year ago
hey how fast do these things actually go? 30-40?
SmellyGreenTrees 1 year ago
u knew it was recording stop lying
xTraxxifyx 1 year ago
Theres a thing called Break-in period...
archinuk417 1 year ago
how old are you.. Like 9.. how do you fucking wreck it
Joka2305 1 year ago
Which site did u get it from? i wanna find one that people advise
JTJG94 2 years ago
how did u wreck it
Nypoison 2 years ago
did u even break it in or wat ohh yeah nothin that wheelie ate shit
livewire539 2 years ago
how much waz it and where did u get it......
livewire539 2 years ago
do these 47cc pocket bikes last awhile?
maxboya 2 years ago
This comment has received too many negative votes show
first u need to learn how to start ur pocketbike dumb ass
straightgangstas731 2 years ago
oh my God it is the hammer
schneeisbag 2 years ago
how did you reck it?
TheMackapacka 2 years ago 5
@TheMackapacka i was riding in some loose rock and the back tire slid out from underneath me and had to order new plastics and cables
areyoucooliam2 10 months ago
sick!!!!!!!!!!!!!!!!!
wolfer686 2 years ago
which is better the mt3 or the mtx
LittleDGurl 2 years ago
mx3
'
therealskater1 2 years ago
im getting that one in green
coltfan8899 2 years ago
Dude i compared tha cagllari to the mx3 and every thing is tha same exept tha cagllari is one more inch above tha ground
ThaFunkeyMonkey111 2 years ago
@ThaFunkeyMonkey111 no mx3 has a reinforced frame so its safer
ChokeOnMySniper 1 year ago
did you break that thing in before you fully throttled it, because it says fresh out of the box. Anyway nice bike man i'm gettin one wednesday or thursday
on3m4n55 2 years ago
fuk dude they like delayed mine so its coming this wensday
therealskater1 2 years ago
yo i have the same exact one and im gettin but its fricken awsome
leatinabbb 2 years ago
No dude I weigh 120
chris28ish 2 years ago
I got mine from MPR and it sucks! It doesnt even move, just reves like its in neutral or somethin
chris28ish 2 years ago
that means you need to go on a diet.
TeamGreenKx100 2 years ago 2
damn i was looking this up and this thing is so little im taller than that guy and imagine me on that thats imbarrison arent there bigger ones
narutofroever 2 years ago
X19-CR Dom its a lot bigger but not to big
legomastercheif1176 2 years ago
wow ur smart flooring it right out of the box, that ruins the motors, ur supposta break them in.
crysis1037 2 years ago
Nice wheelie at the end.
hockey4life220 2 years ago
they suck mine is falling apart! dont buy one!!! my motor mounts rattled off from the vibrations..
thormx47 2 years ago
getting mine tomorrow
chris28ish 2 years ago
cool i got mine and its awesome but small
Wh1t3Boys4r3al 2 years ago
wow srry dude thaught u were someone else
loganpbisme1 2 years ago
how fast does it go
Tjlilhunter 2 years ago
47+ mph...
jrvmaniac 2 years ago
omg srry dude i cant belive u recked it
Riooooboy 2 years ago
u poor thing u wreck it the next morning WOW u dum shit
fr3shions 2 years ago
1/4
jester6241996 2 years ago
gay ass wheelie at 1:30
gpmx3rider 2 years ago
howd it break?
enjoiskater1893 2 years ago
seriosl ushouild have broke it in mine runs since i broke it in
bladepocketbikesrule 2 years ago
for how much did u buy it? and from were?
badboy12887 2 years ago
y u dont get a X18 pocket?????
PITBIKER98 2 years ago
cost too damn much
saxmancam 2 years ago
wat does breaking it in mean??
jaysand23 3 years ago
getting the engine used to running at speed. Thats why motors always last longer if you break them in properly before going full throttle
ProtoPaintballaKid 2 years ago
It means to loosen things up in the engine. When u 1st get it everything is tight. When u break it in ur makin the piston fit right into the piston sleeve. Thats y u should never nail it when u first get it brand new. Jus take it ¼ or ½ throttle a couple of tanks
SHAWEAGLEBOI 2 years ago
one you retard you have to break it in first and second that wasn't even a wheelie!
sk8demon122 3 years ago
are all yall dum its probalbly still breaking in
1titan2561 3 years ago 3
no da u wrecked it the next day u cant ride it that hard out of the box u gota break it in first
surfmaster17 3 years ago 2
ya about that what is the proper way to break it in.
adamcushway 3 years ago
1) u can let it idle at low rpm
2)Instead of full throttle out the box do ¼ or ½
3) jus take it slow for like a 2 or 3 tanks
4) no hard reving
SHAWEAGLEBOI 2 years ago
You should ride it hard during a break in, 3/4 max, only after the engine has warmed up COMPLETELY. Taking it slow (staying in a small range of RPM) is the improper method of breaking in an engine.
MonokuroBooHokKan 2 years ago
This comment has received too many negative votes show
You are a dumb ass. Why you think they say when u buy a brand new car keep it under 60mph? So u dont mess up the engine, you are dumb as hell!! If you ride hard for break-in you are going to damage the connecting rod and probably the crank too.
SHAWEAGLEBOI 2 years ago
They say that because ignorant people like to rev their engines before a complete warm up. How is riding it 3/4 throttle going to damage the connecting rod/crank? Do you even know what happens during the break in process?
MonokuroBooHokKan 2 years ago
The worst thing anyone can do is to give advice on a topic they barely know anything about and act as if they have superior knowledge on that subject.
MonokuroBooHokKan 2 years ago
This comment has received too many negative votes show
During break-in you do not supose to ride hard, you are supose to take it easy. You said " You should ride it hard during break-in". Listen up go to pg. 2 for comments and look at all of my comments. Oh yeah and I do know what break-in mean. If you read the comment on pg 2 the last one or pg 3 the first one it should tell you. Look for "SHAWEAGLEBOI" ok? Good.
SHAWEAGLEBOI 2 years ago
By riding it hard, I don't mean full throttling. How do you wear in the piston rings to the cylinder surface without enough compression? How do you gain enough compression without a higher gas pressure? How do you gain a higher gas pressure without adding more gas; riding it hard? Riding it hard > more gas pressure > more compression > pistons seals wear into cylinder surface faster. I read your comments, you don't know anything about breaking in properly.
MonokuroBooHokKan 2 years ago 2
This comment has received too many negative votes show
Yeah ok well buy nitro rc car and break it in your method and see what happens ok? You will destroy your rod and crank. You have no idea about break-in. Believe what you want to, I'm done talking about this. Oh yeah you have a cheap ass bike by the way. You paid about $279 or something like that? Those bikes are pure shit. Have a nice day.
SHAWEAGLEBOI 2 years ago
I don't need a nitro R/C car, take a look at my Channel, I have 2 Pocket Bikes. The green one starts perfectly with the proper break-in method. Why are you comparing R/C car to a Pocket Bike anyways? They are made differently. All Cags are around 200-300 dollars, unless you buy the water-cooled 39cc Replica. All Cags are cheapass bikes, there's no alternative, so your comment was pointless.
MonokuroBooHokKan 2 years ago 3
If you can't show any contradictions in my previous explanation, then it means that your break-in method is incorrect. You are saying the same things as the beginning, "you will desotry your rod and crank." yet you never give any explanation for why this would be the outcome. Your argument does not contain any explanations or reasoning whatsoever, you're simply stating the same outcome over and over again. You should learn more about the topic before talking again.
MonokuroBooHokKan 2 years ago 5
This is all I'm going to say "Believe what you want to believe." I'm done with this break-in thing. All I'm saying is Don't go hard on it, gradually increase. I'm done so please leave me a lone.
SHAWEAGLEBOI 2 years ago
I don't blindly believe, I go by facts and logical reasoning.
MonokuroBooHokKan 2 years ago 2
@MonokuroBooHokKan damn son
tikilover812 1 year ago
you're comparing an rc car to a pocket motorcycle, and your saying the break ins are totally different? WELL NO SHIT, SHERLOCK.
wajalama 2 years ago
whatever
SHAWEAGLEBOI 2 years ago
is the hardware like brakes and everything like a dirt bike, like foot pedal for the back brake or is it just right brake is back and left is front...just wondering...thanxs
VaneSkat3rz 3 years ago
i just got mine! it is black & silver and it's so hard to wait
891465 3 years ago
i thought the wheelie was cool. im gonna do the same thing and make my mom mad... she said no stunts but i'll secretely take it the skatepark lol
891465 3 years ago
a pocketbike 2 the skatepark?!?!?! SWEET!!!
guncrazy411 3 years ago
its gonna break, idiot
Dubbyboy326 3 years ago
i got one 2.. balls dude u wrecked it next day..
ooziee4mich 3 years ago
lol did u seriously wreck it the next DAy?!?!?!??!?!
lol
drummerdude243 3 years ago
i would kill myself ......
inforlaughs2 3 years ago
i have a question because i want to get one for christmas, does it come with 2 stroke oil and gas and is it already mixed, if it's not then please tell me how to mix it
891465 3 years ago
mine didnt come with any gas or oil i know that it runs on weed wacker gas lol
areyoucooliam 3 years ago
how do you mix the oil?
891465 3 years ago
It depends wat is the ratio on the bike like 1 quart to so much gas they normally tell you when you buy the bike
longdistance50cal 2 years ago
use the mixing bottle. i think its 50:1
bladepocketbikesrule 2 years ago
does the choke have to be open or closed when u start the pocketbike?
terriaki1 3 years ago
it sounds like he goes slow up to the camera then goes full throttle once he gets closer
curtdogg987 3 years ago
do they go fast?
supercleaver3 3 years ago
im going to get one this christmas
rapmasterDizzy 3 years ago
you are fucking pussys
trx7000 3 years ago
gay wheelie!!!
mcfartard 3 years ago
nice bike bro! I wish i could get one...
toxicsuccess 3 years ago
hey man were u got urs from?
damanisdakila 3 years ago
that must suck wrecking it
Etwan164 3 years ago
hey man do dese bikes have silver rims or it depends da kolor like blue would the rims might kome in blue?
damanisdakila 3 years ago
they go about 50
corey3132 3 years ago
wow you're pathetic if you wrecked it the next day. i got a red & black one 4 months ago and it works perfect. hecka fast
cash4life711 3 years ago
well did you even brake it in because if not that is probly why it broke
elvisandsinsin 3 years ago
does one of those fit me im 5 5 foot high?
damanisdakila 3 years ago
ya you should be able to fit grown ups even ride them so u should fit fine im planing on getting a GP RSR if not a GP MX3 and im about a little shorter than you
elvisandsinsin 3 years ago
thanks bro
damanisdakila 3 years ago
hey how fast do they go?
damanisdakila 3 years ago
my friend is like 5'4 and his fits him
vonydare 2 years ago
im prolly getin this ... wither this or the cagllari but prolly this
cmfthesk8er 3 years ago
i just bought that bike and color and it rocks doesn't it
pocketbiker3 3 years ago
i just bike and color,were do you live
pocketbiker3 3 years ago
how did you wreck it
TheCardShark101 3 years ago
wow nice xD!
ScatManMan 3 years ago
Im getting one lol right how do you do that smile scatman
xboxcheatman 3 years ago
how did you wreck it?
moparmaniac21 3 years ago
Dude nice bike, i just ordered that exect same one color and every thing.
does it still run good for you?
cobbfutbol62 3 years ago
gay
BananaHamock13 3 years ago
Nice Wheelie
TeamBlueHouseBmx 3 years ago
Learn to use pegs.
MonokuroBooHokKan 3 years ago
This has been flagged as spam show
how tall are you?
kurby238 3 years ago
hahahhaha you suck....
sk8te4life11 3 years ago 3
so which site is better to order off of? usa-pocket-bikes or minipocketrockets???? im thinking about the gp mx3, is this a good bike or crap off these web sites?
streetrunna10 3 years ago
minipocketrockets man i bought a blade the one next to the this one its fast i got a stage one performance kit for it tho i go i topped out 67 mph last week
herbalcashflow 3 years ago
I looked at both sites I want one for my b day the one on usa-pocket-bikes lookes better though
TeamBlueHouseBmx 3 years ago
get it off bestpocketbikesonline*com their the best they have the gp mx3 replace the * with a .
MaCBo0k123 3 years ago
Next time you start it up, IceOtterian, try taking it off it's stand, unless you already did, then disregard this message. We worked on ours for about an hour with no results until my brother suggested taking it off it's stand. We did, and after 2 pulls, it started right up. Good luck.
wetwillie1800 3 years ago
wow, lucky. u got yours to go with only 4 pulls....mine took my dad, my friend and I several hours and many blisters to start up....once
IceOtterian 3 years ago
yeah break in period is like 3-4 tanks and dont ride it full throttle
cash4life711 3 years ago
how long does it take for the break in period on a gp mx3
sk8terboi562 3 years ago
3~4 FULL tanks. Ride in different range of RPM, don't go too high.
MonokuroBooHokKan 3 years ago
what website u ordered it from? I want to know so i dont get a bad quality pocket bike...
cash4life711 3 years ago
lol he did a wheelie at the end that was gay
runescapeman4578 3 years ago
im gettin the same 1 on ur first run never go flat out it will mess it up on the fifth tank of gas u can do wat ever u want and ur first time u have 2 put 25:1 gas to 2 stroke oil mix
till it gets broken in
wepons4me 3 years ago
did anything break on your pocketbike because i am thinking about getting the same one
lambo2xl 3 years ago
he didnt even break in the engine
laliuxflorencia 3 years ago
dude u shouldnt of rode it that hard out of the box u have to break it in like five tanks or somthing b.c i have the same 1
hbkandy2jarethebest 3 years ago 2
should i get this or an electric one and r these illegal to ride in parking lots? jw and r they loud?
seantherocker11 3 years ago
yes they are legal even on streets but no boulevards
sk8rack 3 years ago
he has to much oil in there thats why its smokin he only need three caps full to mix in there.
goulds1000 3 years ago
r u sure thats not a gp rsr
spikeisag1213 3 years ago
it is a gp rsr i use to have to have one til it broke
dallascowboyfan100 3 years ago
i got the same bike but in red and black
kevandino 3 years ago
me to
gpmx3rider 3 years ago
bad weelie on dis but other vid was good
gpmx3rider 3 years ago
hey evry1 i am looking into buying a gp mx3 and i wa wondering if there high maintence and where to order them from. so just comment back and watch my videos!
lilskater47 3 years ago
where did u get it from?
mejolagbe1016 3 years ago
im thinking the same thing
mejolagbe1016 3 years ago
me too
damanisdakila 3 years ago
thinkin about gettin one. would u say its worth $240?
flyinsquirrel360 3 years ago
$189
gpmx3rider 3 years ago
$189.00
gpmx3rider 3 years ago 2
yea plus shiping and handling
damanisdakila 3 years ago
pretty cool bud im geting one soon but mine will ahve mods of crouse
goldstrauss 3 years ago
No break in just go easy on it for a couple of tanks 25:1 fuel mix. Dont just let it sit there and idle you'll foul that shitty chinese spark plug even faster
balls538 3 years ago
y dont you kiss my ass
codygrant94tracker 3 years ago
LOL
JustYourAverageNick 3 years ago
he didint even go that fast
9953163 3 years ago
This comment has received too many negative votes show
that was th stupidest fuking thing ive ever seen, go back to your shitshak redneck!!!!
jackanddylanvids224 3 years ago
atcually it does go fifty dependy on weight and u kan make it go 65 just turn up the trottle
almostsk8r1515 3 years ago
how do you turn up the throttle???please reply because im getting one
rotondi123 3 years ago
me to
9953163 3 years ago
how
9953163 3 years ago
you probobly just have to twist the carburator knob, it gives more gas into the engine to make it go faster
rendog92 3 years ago
wouldnt it choke da engine ?
damanisdakila 3 years ago
i have the same one but in blue its pretty un
rodrigoskatessteezy 3 years ago
hahahaha wow!!!!!!!!!fag
DOMakaBADASS 3 years ago
nice i had a mini chooper and it was brand new and it wood not go but it wood start
codygrant94tracker 3 years ago
because your an idiot.
9953163 3 years ago
ok im sorry but u did not go 50mph like u said a few pages of comments back. it doesnt go that fast. but good try! :D
bowber 3 years ago
Have you learned where to put ur feet yet xD learn to ride before u actualy ride it.
TrentOWNZ 3 years ago 2
hay i have the same one in blue the bad thing is i can never start it up i oways hafe to takethe spark plug off and pore regular gas into the engine then it will start up
kennethjay736 3 years ago
that was a sick wheelie at the end
burnafatty 3 years ago 2
nice wheele man
stephshane1 3 years ago
he said he thought it wasnt recording when he did his wheelie when he was staring right at the camera
AqUinAs024 3 years ago