a good video I like the blade concept but i dont belive they sell the same blades. and the airframe desing is bad motors position is bad cause they will twist the frame where they are sitting making them to go loose and the axel will tend to move too so it will eat the big white gears
what a load of bullshit the first time i flew mine it was off belence and fell over fucking the blades and broke one of its legs and that was just from falling sidways the next time i flew it i maniged to get it in the air and it come down from about 20 feet and smashed to bits so the fact this guy hits it on the ground he dose it realy soft they are made from shit alloy and light plastic and caund any further in the air than 5 feet or you will fuck them
dit is de mensen lekkermaken met iets wat zeker niet klopt
ik heb om deze film ook zo een gekocht maar is zeker niet zo stevig en sterk dan als hij laat zien op de film de stukken van de rotor bladen vliegen om je oren als je wat raakt dus ik durf hem zeker niet in de buurt van een muur te laten vliegen
dus oppassen als je zo een koopt er klopt niks van
@Speeedyyy3333 I believe its not required if in croatia there is rc cars and trucks sold there. The signal does not interfeare with RCC regulation in my country. Furtheremore the signal strengh is low. its just a toy.
yo compre uno de estos lo tarje desde china lo compre en una tienda que c llama china toys pero las blades c me quebraron la primera ves que lo huse no son las mismas que en el video y creo que uno compra los articulos por lo que persive en los anuncios y se me hase de mal gusto que lo comercialisen de una manera y lo vendan de otra para que tengan cuidado
Blades on this thing are crap. These are not the same blades that they sell on the heli. The B blades crack from first tap on anything. The demonstration he did with the landing gear is B.S. as well. I've already bought two sets. They crack first hard landing. Metal parts of this heli seem fine, but the plastic on it is cheap, making this a bad purchase. I heavily advise against it. If you must have one anyway...mine is for sale.
@huntersidon Dear Meaves, you may strengtern the blade by wrapping it with a wide cellophine tape. The tape should be two times wider than the blade. Otherwise purchase same size of blade but diffrent brand which is stronger, I proposed T23 blade. I used it for more than a year and its never break. Tq for your comments.
@shukbad I understand that you can modify the heli to make the items stronger; however, they must have cheapened the manufacture of since the heli you demonstrate in this video was made. There is no way you could fold the stock landing gear like that. The blades you have on this one look stock, but my experience with mine is that the stock blades on these are made out of too hard of plastic causing them to chip and shatter very easily. Thanks for the tip about the tape.
So does the MJX T23 Blade work well on the sky king? I agree with huntersidon - These Heli's are very cheap and almost dangerous. I own 1 TREX 450 and I'm building a Chaos 600 now. I was give this Sky King as a joke by a friend. I've never seen anything so cheap. Like most of the exports from China, perhaps the heli's that they export are cheaper than the ones they sell in Europe. If I held my blades against the wall like you did, the Heli would destroy itself!!!
@huntersidon your corect mine fell over and fucked the blades and the landing gear then i got it 20 feet in the air it went stupid and hit the ground and busted into a million bits big fucking wast of 105.00 bucks wish someone had of told me that the plastics that thin it shatters on impact they also say they are easy to fly what a load of fucking bullshit that is.
@trackspike64 We need to trim it before take off and during flight. The diffrent in speed of the blade will also disturb the setting. One more thing, when the battery getting low you also need to trim it again. As a conclusion you need to always trim it during flight. TQ for watching and comment.
@volhippy Its not me demostrate it. But i believe its already reinforce with certain type of glue that i have try on my Belt CP V2 wooden blade before. Its works well. I'm a kind of busy lately. May take some time b4 i can show u how. But basically just wrapped the blade with wide clear tape 3' will do. TQ for your comment. Currently i'm upgrading my FXD heli to be fitted with 6ch transmitter/receivers.
@volhippy You can reinforce the blade by using 3 inch transperent tape and rapping both side of the blade. Hopefully i will be able to came out with the video to show how to do it yourself soon
a good video I like the blade concept but i dont belive they sell the same blades. and the airframe desing is bad motors position is bad cause they will twist the frame where they are sitting making them to go loose and the axel will tend to move too so it will eat the big white gears
fjobin1 1 month ago
looks bloody dangerous to me,id hate to see him with a chainsaw
chrisbristow896 2 months ago
Great video
wigsoccer 2 months ago
HIEU CHET LIEN HAHA
happyboyy8k 3 months ago
what a load of bullshit the first time i flew mine it was off belence and fell over fucking the blades and broke one of its legs and that was just from falling sidways the next time i flew it i maniged to get it in the air and it come down from about 20 feet and smashed to bits so the fact this guy hits it on the ground he dose it realy soft they are made from shit alloy and light plastic and caund any further in the air than 5 feet or you will fuck them
obieezx11 3 months ago
which blades come with this heli? i know if they hit the wall like that they will break,this is a joke to me
11DUSTOFF 3 months ago
hi was geht
MrTimo113 4 months ago
looks awesome. how long is the flight time from fully charged?
hardcoresanchez 4 months ago
@hardcoresanchez 5 Minutes continues flight or 15 Minutes if fly and landing practice
shukbad 4 months ago
This has been flagged as spam show
There are spare parts for this helicopter!
Blade Set;
ebay.com/itm/300582459942
(dont forget to put 3 'w' at the beginning)
Receiver (27 & 29mhz);
ebay.com/itm/300577798328
(dont forget to put 3 'w' at the beginning)
ahm1900 4 months ago
Does anybody know if can i carry a HD Camera weight 1.1 pounds?
espimexico 4 months ago
This has been flagged as spam show
TO ALL YOUTUBERS SEARCHING FOR RC REVIEWS OF THE SKYKING HELI , GO TO MY PAGE AND CHECK OUT THE "INDESTRUCTABLE" SKYKING RC HELI!!!!
intolerablemonobrow 4 months ago
SUBTITLES!!!
fergonza2003 5 months ago
wo kann ich finde eine für mich, bitte??
rocharoversi 7 months ago
dit is de mensen lekkermaken met iets wat zeker niet klopt
ik heb om deze film ook zo een gekocht maar is zeker niet zo stevig en sterk dan als hij laat zien op de film de stukken van de rotor bladen vliegen om je oren als je wat raakt dus ik durf hem zeker niet in de buurt van een muur te laten vliegen
dus oppassen als je zo een koopt er klopt niks van
54sjef 8 months ago
Well.. I had one on customs and they send It back because I had no declaration and couldn't get license for import to my country!
Speeedyyy3333 10 months ago
@Speeedyyy3333 How come there is such regulation?? freedom ? human right?
shukbad 4 months ago
Comment removed
Speeedyyy3333 11 months ago
This helicopter have EC DECLARATION OF CONFORMITY?? Need this to import in to my country!
Speeedyyy3333 11 months ago
@Speeedyyy3333 I believe that its not required in view of its only a toy with very low signal strengh. Just like other toy such as rc cars or trucks.
shukbad 10 months ago
@Speeedyyy3333 I believe its not required if in croatia there is rc cars and trucks sold there. The signal does not interfeare with RCC regulation in my country. Furtheremore the signal strengh is low. its just a toy.
shukbad 10 months ago
yo compre uno de estos lo tarje desde china lo compre en una tienda que c llama china toys pero las blades c me quebraron la primera ves que lo huse no son las mismas que en el video y creo que uno compra los articulos por lo que persive en los anuncios y se me hase de mal gusto que lo comercialisen de una manera y lo vendan de otra para que tengan cuidado
AIRFORCEONEBLACKHAWK 7 months ago
Blades on this thing are crap. These are not the same blades that they sell on the heli. The B blades crack from first tap on anything. The demonstration he did with the landing gear is B.S. as well. I've already bought two sets. They crack first hard landing. Metal parts of this heli seem fine, but the plastic on it is cheap, making this a bad purchase. I heavily advise against it. If you must have one anyway...mine is for sale.
huntersidon 11 months ago
@huntersidon Dear Meaves, you may strengtern the blade by wrapping it with a wide cellophine tape. The tape should be two times wider than the blade. Otherwise purchase same size of blade but diffrent brand which is stronger, I proposed T23 blade. I used it for more than a year and its never break. Tq for your comments.
shukbad 10 months ago
@shukbad I understand that you can modify the heli to make the items stronger; however, they must have cheapened the manufacture of since the heli you demonstrate in this video was made. There is no way you could fold the stock landing gear like that. The blades you have on this one look stock, but my experience with mine is that the stock blades on these are made out of too hard of plastic causing them to chip and shatter very easily. Thanks for the tip about the tape.
huntersidon 10 months ago
@shukbad
So does the MJX T23 Blade work well on the sky king? I agree with huntersidon - These Heli's are very cheap and almost dangerous. I own 1 TREX 450 and I'm building a Chaos 600 now. I was give this Sky King as a joke by a friend. I've never seen anything so cheap. Like most of the exports from China, perhaps the heli's that they export are cheaper than the ones they sell in Europe. If I held my blades against the wall like you did, the Heli would destroy itself!!!
3084me 5 months ago
@huntersidon your corect mine fell over and fucked the blades and the landing gear then i got it 20 feet in the air it went stupid and hit the ground and busted into a million bits big fucking wast of 105.00 bucks wish someone had of told me that the plastics that thin it shatters on impact they also say they are easy to fly what a load of fucking bullshit that is.
obieezx11 3 months ago
when u fly this copter did u have to set the trims in any way or are they right from the factory
trackspike64 11 months ago
@trackspike64 We need to trim it before take off and during flight. The diffrent in speed of the blade will also disturb the setting. One more thing, when the battery getting low you also need to trim it again. As a conclusion you need to always trim it during flight. TQ for watching and comment.
shukbad 11 months ago
Holy crap is that thing stable!
primalspy 11 months ago
@volhippy Its not me demostrate it. But i believe its already reinforce with certain type of glue that i have try on my Belt CP V2 wooden blade before. Its works well. I'm a kind of busy lately. May take some time b4 i can show u how. But basically just wrapped the blade with wide clear tape 3' will do. TQ for your comment. Currently i'm upgrading my FXD heli to be fitted with 6ch transmitter/receivers.
shukbad 1 year ago
@volhippy You can reinforce the blade by using 3 inch transperent tape and rapping both side of the blade. Hopefully i will be able to came out with the video to show how to do it yourself soon
shukbad 1 year ago
omg assi...^^
watch?v=QEKj8h4qKpQ here is the original video (better sound, better vid quality)
MAKE YOUR OWN VIDEOS!
kingmyi 1 year ago
@kingmyi Its for my local viewers. To long time required if view fron the original location. Chek out my laterst video made by myself. TQ
shukbad 1 year ago