MY SUPER CHEAP EXI 450 3D MACHINE WITH $55.00 TAIL SERVO AND GYRO COMBO!

[yz426clint]

I love mine! i need metal grip still

[migser85]

aprenda a volar, el camarografo era el que movia la camara alrededor del heli para q parezca 3d

[osyhaz]

@migser85 no se aceptan comentarios de FPVeros, ni helicoptereros retirados...jeje

[osyhaz]

@migser85 Marica! arregla tu heli... Me siento solo... Cabron! te voy a rebanar tu mierda de avion fpv con mi hk 500 para devolverte al mundo de los hombres de verdad!

[pingotube1]

Wow la verdad quiero felicitarte por saber volar así este helicóptero yo tengo ya mas de un año volando y ni siquiera me atrevo a ponerlo de frente. Tengo una pregunta haber si me puedes ayudar... Yo tengo un HK 500 y la cola de mi Heli se tuerce, lo he apretado mucho y aun así tiende a moverse (torcerse) Gracias de antemano y Felicidades.

[osyhaz]

@pingotube1 Gracias! Eso que me comentas de que se te tuerce, es como que la colo va moviendiose lentamente hacia el lado de las manecillas del reloj, o en contra? que gyro usas y que radio. Yo no soy muy teorico en asuntos del seteo, pero mis helicopteros preferidos, es indispensable para hacer 3D, asi que posiblemente en mi lenguaje primitivo para algunos, talvez te pueda ayudar... Te adelanto que este gyro que uso en el video, a veces da ese problema y a veces se le quita...

[osyhaz]

@pingotube1 Lo de que todavia no te atreves a ponerlo de frente, en mi humilde opinion, es porque comenzar con un 500 no me parece muy buena idea. Todavia, despues de volar mas de tres años helis y logrando un 3D no profesional (estoy viejito para eso... jaja) pero digamos que en un nivel por encima del promedio, todavia le tengo bastante respeto a helicopteros tan grandes. Para mi el 450 sigue siendo el mejor tamaño. Mi nuevo canal en youtube es osyhaz. Saludos!

[osyhaz]

@pingotube1 Hey, disculpa, ya capte! Primero que todo, revisa que la banda no este torcida por dentro y segundo, ponle un pedazo de masking tape a la parte del boom que entra en el boom mount, a lo largo para crear cuerpo al boom. En alguno de mis helis, incluso, le he puesto un tornillo que pase a traves de el boom mount y lo enrosco en el tailboom en una posicion que no toque la banda. Un poco raro, pero lo aprendi de un heli usado que compre que vino asi... jeje

[pingotube1]

Oh gracias por haber respondido tan rápido....Disculpa pero tenia el Heli en mi casa y tenia que ver que gyro tengo un E-Sky 0704B...Aunque ya vi que me contestaste mi pregunta. Voy a checar que la banda no este torcida. Lo del tornillito es buena idea ya lo había hecho en otro 500 que se me estrello, pero creía que a la mejor no era buena idea...voy a probarlo otra vez. Tengo también 2 HK 450 que son los que vuelo (no como tu) pero quizás algún día...Se lo difícil que es volar así. Lancaster CA

[osyhaz]

@pingotube1 Mira, para serte totalmente honesto, lo del tornillo lo he hecho como medida desesperada, LOL! Y si, me atormenta un poco hacerle el daño del hoyito al boom mount pero mi apreciacion del hobby es muy diferente a la de la mayoria. Volar, cueste lo que cueste es mi prioridad los sabados, y si hacerle el hoyo y meter un tornillo es el arma para ganarle a un tailboom necio y salir volando, pues lo hago...jeje

[osyhaz]

@pingotube1 otra confesion... Mi primer invertido y primeras maniobras light 3D las hice con un 550, luego lo hice con 450 y si, es bastante mas dificil, pero una vez le agarre, ya preferi usar los 450 por lo barato de las reparaciones. Lograr maniobras en 450 no te hace menos, todo lo contrario. En teoria si logras algo con un 450, lo podrias hacer en todos los mas grandes asi que vale la pena el esfuerzo. Saludos!

[pingotube1]

@osyhaz Gracias por tu tiempo, estaremos en contacto y ya te molestare con mas preguntas. Que tengas un bonito días y el sábado muchos buenos vuelos.

[satgod]

this is what i've been saying in my youtube videos also

I now have 3 exi 450's and love them you can get a tarot combo kit with all electronics for 190+shipping Some of my tarot parts where actually stamped align, maybe they are ran off the same line I dont know but quality wise they are every bit as good as trex, but I will not down the exi its a great bird I wouldnt buy anything less than the exi

[cecilio98562]

Bert Kamerer fue la inspiracion para que yo acudiera del T-rex 250 al Gaui 200. Su capacidad como pilote es impresionante! Yo estoy totalmente perdido en los helis. Tengo T-rex 450 pro, T-rex 450 V2, EXI 450 (x 2), EXI 250, T-rex 250, Gaui EP 200 V2, y Gaui 200(modelo viejo). Estoy contemplando KDS Innova 550.  Saludos!

[osyhaz]

@cecilio98562 jaja! Esto es una enfermedad. Pero yo ya le estoy bajando porque es mucho gasto. Mi flota en helis consiste en 2 gaui 200, 2 sport 450, 1 450 pro, 2 trex 500 (uno de ellos clon), 1 Protos 500, 1 blade 400 y las tripas de un exi 450 que voy a armar de nuevo para intentar FPV. ahh y un blade msr! jaja. Tuve un trex 600N pero lo vendi, no me llevo con el nitro, jaja. Mis preferidos siempre son los 450, en especial el sport.

Mi nuevo canal es osyhaz en youtube, saludos!

[dutch349311]

@osyhaz wanna thank u again for helpn me out with questions I had. I finally got my exi450 this week. You posted I should use mg90s servos but it's not fitting as a tail servo in bracket should that b sumptn different than mg90s? Also f u can post detailed pics of 450,so I can c where n how y mounted n wired servos,rx,etc....... Thanx

[Neonerd87]

Al ver el video me causa curiosidad el saber de que país son las personas que lo hicieron??

[automodelismotegus]

@Neonerd87 Bueno, yo, que soy el que vuela soy de Puerto Rico, llevo viviendo mas de diez años en Honduras o sea que tengo mezcla de acentos. El camarografo es hondureño y el Video es en Honduras.

[cecilio98562]

@automodelismotegus Bro, eres un piloto excelente! Tengo EXI 450, alpha 400 3500kv, gy401 gyro, mg90s servos, 40A ESC. La velocidad de las aspas es increible con el engrane de 15T! Para 3D fuera de serie tengo un gaui EP200, 5600kv, jr 370 3D gyro, jr servos digitales, aspas de FC, 30A ESC, 1200 mAh 3s. No habia visto hispanos en este hobby, me alegra ver que no estoy solo! En hora buena!

[osyhaz]

@cecilio98562 Gracias! no soy tan bueno pero si lo disfruto bastante! Andas bien equipado!...actualmente en 450 uso Align y Tarot sport y pro pero definitivamente el Exi me dio muy buen servicio y se lo recomiendo a cualquiera para comenzar en 3D con poco presupuesto. Tengo dos gaui 200, el V1 y V2, especificamente con el v2 no me fue bien, ni lo uso. Me parecen demasiado caros los repuestos para tan bajo desempeño en 3D con lipo de 2S, aunque me imagino que el tuyo es un demonio con 3s...LOL!

[osyhaz]

@cecilio98562 Actualmente creo que no hay tantos latinos metidos al hobby que se destaquen en los helis, en los viones tenemos a Gabriel Altuz (paisano mio) que debe andar entre los primeros cinco en XFC. Pero en helis hay uno que si no me equivoco es venezolano que se llama Bert Kamerer (dificilmente no sepas de el) que por cierto tiene muy buenos videos de gauis 200. Lo que pasa es que el como que no se esmera mucho en competencias, pero para mi es de los mejores. Saludos!

[dutch349311]

Here's question just so I'm more clear. Lol

Aside from lipo's,transmitter,& lipo charger, what do I need to complete "EXI 450 PRO Carbon fiber heli kit shaft version"? thanx again

[osyhaz]

@dutch349311 thanks! Its been a while since I did that video, now I use kind of better helis and electronics because o got a bit better on 3D and was not enough performance for me BUT, I still think it is the best choice to buy a clone with some especific electronics proven by someone capable to do some 3D. The turnigy typhoon 2215h 3550kv with 13t work quite good for sport and mild 3d, my favorite cheap servo for ciclycs and tail is the mg90s, no matter if it is hobby parts or turnigy

[osyhaz]

@dutch349311 the pentium 30a esc is enough but I can push very hard the pentium 40, Im about 90% sure volcano series is the same and it is cheaper. The gy48v gyro is a must use. As a comment I have to tell you that a torque tube version is not the best choice for a beginer because as begginers we use to have problems landing and TT are not made for that rude use. If you like the pro because you like the frame, the head, the canopy or other than the torque tube, you should buy the...

[osyhaz]

@dutch349311 you should buy the parts to make it belted. It is a lot harder to screw the belt than to strip a TT gear.

I have a bad experience with 450 pro but can blame the helicopter because I bought it used(I have bought only two used helis and both became a pain in the ...) and I lost the interest on making it work because I started to get in FPV and have a couple of sports that works great. It is your choice, but today (dont know tomorrow... lol) I think the 450 sport is the best choice

[osyhaz]

@dutch349311 Im not sure if I forgot something, feel free to ask. I will do my best to help, I enjoy to see people that doesnt like to become hooked to a brand name. Youre doing right, and if you have a flair for it, Im sure you will develop your skills faster than people that uses expensives helis under the same conditions as you. Another tips, I use the 325mm $3.36 hobby partz blades and all the main gears, tailbooms , etc is chineese spare parts and works awesome.

Good luck man!

[dutch349311]

@osyhaz I'm debating buying trex450pro or exi450 now that I've seen ur vid and I'm new at this & honestly can't afford trex so seriously thinkn exi for now. So as a noob what list of electronics do u recommend I order including motor,pinion size, servosThanks,really enjoy ur vids

[kavic5150]

Wow, you are a better pilot than I thought. That looked smooth and professional. Is the gaui 550 a new bird for you? Nevermind, you dont need any advice from me.

[osyhaz]

@kavic5150 Thanks man! I can do some more stuff, you can see it on my channel "osyhaz", I cant get into this account anymore. About the gaui, it was the third bird I bought and was nice to beggin in 3D because of it size and stability, but as you said, a little out of power. If you are thinking about buying it, I would recomend to try the gaui 425. I have looked at some videos of Bobby watts and Kyle stacy and looks awesome on 3D and there are cheap efficient blades for it size.

[osyhaz]

@kavic5150 I have sold my gaui 550, since I bought a trex 500 and a Protos and they were very reliable and powerfull compared to the gaui 550. I dont mean that the 550 is bad but in my experience you have to invest too much money to make it work quite good. To me, after doing 3D on a 450 with an Scorpion motor, the hurricane 550 became aborring and limited heli. About the leds, I think the problem is the camera and me. I used to try the new hardest maneuvers at the end of the day...LOL

[gaetanboiv]

Hi my friend, I like your way of thinking. Why pay for the original when we are in a learning process. When we learn, we hit . Why destruct a high cost machine, when it is possible to learn and destruct a cheaper one. I use the gyro. I live in Canada (Québec) and it is cold out there and the gyro has no problem with that.

[osyhaz]

@gaetanboiv Hi! Im the guy on the video but have problems to get into this account... osyhaz is my new and more active channel so you can take a look at some new videos doing kind of better 3D with this gyro. It is nice to know that some people know the real value of money and also that this giro works for you in your weather conditions.

I still think this gyro is really good and I use it on my backup helis for do 3D and do a great job, so good that today I removed a 401

[osyhaz]

@gaetanboiv Today I was working on a trex 450 pro (clone) that didnt convinced me yet, and decided to remove the fut. 401 and place another gy48v on it, I honestly believe it is better. I use this cheap gyro in my hk 500 and it performs awesome. I can do very reliable backward inverted hurricanes and pyroflips with it. It makes me furious when some ass h... says that pirorate bull sh... problems with it. I also can do pirofunels with it and no pirorate problems at all

[gaetanboiv]

@osyhaz I use the same gyro you use. The Detrum. I own 3 or 4. They are all excellent, but I fly more scale than 3D which will be my objective this spring. The little HK has the same characteristics and it is as good as the Detrum.

[automodelismotegus]

yes 100%

[douhnutz]

Is this part compatible with the T-Rex 450?

[demetriusUSN]

Nice flying,I will try that set up with the 450 Pro and post a video.

[osyhaz]

@demetriusUSN

UPDATE!!!, you should buy the mg90s servos for cylics, about $6.00 each at hobbypartz, the sg90 works fine but will be broken and need to be changed on crashes, the mg90 resist lots of crashes, I have never change any of them and I crash one or two times a week. I have tested this one as tail servo and works fine also so if you want to you can save some money buyin it instead of align servo. Important! use the detrum gy48v gyro, more expensive doesnt mean better... Good luck!

[automodelismotegus]

@osyhaz I cant find it at x heli but you can find it at hobbypartz, it is the same people as xheli  I also tried mg90 without the s and feels a little slower than the s.

the one that works perfect to me is MG90S

[helidude35]

Yep!!!

Love the CHEAP stuff. Can't go wrong with the right cheap stuff.

Good flying, Keep it up!!

[helicub81]

Which motor and speed controller did you use on this setuP? And hows the battery life?

[osyhaz]

@helicub81 It is an HDX-3800, now about $9.95 at helidirect!

13t pinion, and a pentium 30 esc. Works great for what i was doing here!

[notasixpack]

can't beat EXI for the price. Agree if you MUST you can get an align gyro and/or servos. The piezo gyros do need to adjust with temps if you live in cold areas. But even then.. I think I built my exi for $140 (with some spare parts). And I use the Turnigy radio too!

[automodelismotegus]

dfter this video I built another Exi 450 just like this one but with SG90 as tail servo and it works almost perfect, it is able to do everything you see on this video. Cant show you here on youtube because Xheli likes to take advantage of this kind of video they did it once with this video and dont even want to help with discounts on parts... Just bought a exceed rc tx but have problems downloading software. that all I need to complete my super cheap combo!!!

[imprint2finished]

I have the same gyro like the one you've got on your 450, im not sure if it was a rebadge or not, the color and exterior is the same as that. very good gyro and it really holds pretty well, matched with align DS520. why buy expensive gyro when you can buy something cheap that does the same. nice flying by the way.

[helimaui]

que chingon!!

[enoel]

Pucha Leo,

envidiable tu manera de volar!!!!