Like so many videos on YouTube that were made before better definition was allowed, it isn't possible to see the necessary detail. It's a real pity because so many videos that would be really useful fall down because it isn't possible to see them properly.
for some reason I don't get an IP address on my wireless device. I copied from the comments exactly what you indicated below in the DNSMasq and Firewall commands
This is triky for noobs like me. I just want to run it in repeater mode. My neighbor and I have one connection. but the signal is bad on my side of the house. I need instruction on repeater mode setup. I just want to relay and boost the signal. The wiki is no help
DD-wrt is tricky for noobs like me. I have permision to share my neighbors net but I can't get a solid signal. I have a WRT564G v8 with the latest build. Its has repeater mode but I can't get to repeat his signal. I know thi sthing will do it I just need the setup. The Wiki is no help. Can you do a new vid? I'm not looking for a bridge just a relay booster...
Awesome. A neighbor came to me asking me how they could accomplish this. I was going to buy a new router with dual SSIDs but guess I can try this first. Will give this a test run on my router tonight.
i have a question the router in my house is in the basement and my room is on the 3rd floor and on my laptop i only get like 20 or 30 percent how can i get more percentage without leaving my room plz reply back
You need to be closer to the signal. There are some tricks you can do, like use a different antenna or boost the signal strength with DD-WRT. But the best solution would be to run a cable and put the wireless router closer to your room, or get a second wireless router to use as an extender.
Use OpenDNS to restrict what websites the open wifi side can access and the bandwidth limit settings in DD-WRT can control bandwidth usage by people on the shared side too.
i would so do this if i could throtlle the bandwidth on the other internerface, i know how to make it work on a transparent proxy to keep ppl off my ip for the most part, its just the limiting the QOS baffels me
Thanks for that info. I will be applying it to my current WRT54GL or ordered WRT150N soon. Any chance you could give a short explanation of each line's purpose and meaning? Always trying to learn more.
As several others mentioned, the text commands are not readable. we cannot apply this technique without them. Will you post them clearly for us please?
Sharing your wireless with anybody is foolish. They do something wrong, and you get blamed for it because its your IP. Let alone the fact they would be hogging your bandwidth which usually is bad enough as it is by yourself.
i am sharing my internet connection to my friends over LAN, initially, my modem connection does appear on my friends PCs on the top of LAN connection on "Network Connection" window..it titled as "GSM on ME"
but, recently i dont know why, it doesnt appear anymore on their's PCs..and it make their connection much slower compared to before..But my connection remain as i am a main..pls help me..
i am sharing my internet connection to my friends over LAN, initially, my modem connection does appear on my friends PCs on the top of LAN connection on "Network Connection" window..it titled as "GSM on ME"
but, recently i dont know why, it doesnt appear anymore on their's PCs..and it make their connection much slower compared to before..But my connection remain as i am a main..pls help me..
1. do i have to have my wireless sender as dd wrt for this to work? or can i just put my wireless reciever on dd wrt?
2.when i go to download the firmware, it shows like 10 different things to downloads and it says only one is the firmware.. is this the right firmware for my router, or do i need to find some other firmware?
Yeah but how do i make my wirless secured so other ppl in my appartment caint use it but my family computers can Eg. moms laptop dads laptop brothers laptop andm y computer?
This would have been good information but I really can't see anything from the video, too bad it's not in HD
BUSA84 2 months ago
This has been flagged as spam show
Try Latino brides in your area rockmycity.info
carolinrakermns 1 year ago
Why not get a cisco AP that supports multipoint and multiple SSID's?
Meowmiks 1 year ago
Like so many videos on YouTube that were made before better definition was allowed, it isn't possible to see the necessary detail. It's a real pity because so many videos that would be really useful fall down because it isn't possible to see them properly.
technoboi0 1 year ago
Hi Dwise,
I have tried over again & again but no luck'
Once i enter the DNS mask info, i cannot even connect to the network, i can see it but connection is not successfull
Any ideas?
defrey74 1 year ago
F@G!!!
thecimerakiller863 1 year ago
Fonera...
XxMEVANSxX 1 year ago
for some reason I don't get an IP address on my wireless device. I copied from the comments exactly what you indicated below in the DNSMasq and Firewall commands
kc59harley 1 year ago
This is triky for noobs like me. I just want to run it in repeater mode. My neighbor and I have one connection. but the signal is bad on my side of the house. I need instruction on repeater mode setup. I just want to relay and boost the signal. The wiki is no help
akashmer 1 year ago
DD-wrt is tricky for noobs like me. I have permision to share my neighbors net but I can't get a solid signal. I have a WRT564G v8 with the latest build. Its has repeater mode but I can't get to repeat his signal. I know thi sthing will do it I just need the setup. The Wiki is no help. Can you do a new vid? I'm not looking for a bridge just a relay booster...
akashmer 1 year ago
do you know how to spoof the ps3 mac using dd-wrt?
yanmon 1 year ago
Awesome. A neighbor came to me asking me how they could accomplish this. I was going to buy a new router with dual SSIDs but guess I can try this first. Will give this a test run on my router tonight.
cferguson0108 2 years ago
how u share it with password?
Fr3shN 2 years ago
Just go to the Wireless Security settings and changed the Disabled to Enabled. Select your settings and you're good to go.
dmdufrene 2 years ago
um um um um um um
ID0NNIE 3 years ago 2
how can u disable your security on your wireless network??? Please reply back
Alexb1494 3 years ago
you can reset it your router and it will automatically have no password or security
Navraj17 2 years ago
i have a question the router in my house is in the basement and my room is on the 3rd floor and on my laptop i only get like 20 or 30 percent how can i get more percentage without leaving my room plz reply back
clevelandsmith65 3 years ago
You need to be closer to the signal. There are some tricks you can do, like use a different antenna or boost the signal strength with DD-WRT. But the best solution would be to run a cable and put the wireless router closer to your room, or get a second wireless router to use as an extender.
dwise82 3 years ago
thanks for the advice but i will just buy a cable modem it will be easier
clevelandsmith65 3 years ago
Why would you buy a second cable modem? That's the worst solution to your problem I've ever heard. you=(FAIL)
vbpeepee 2 years ago
I need a hacker to hack a connection to get the WEP of my neighbor.
MarvelousJosh 2 years ago 2
Um, no. That is illegal buddy. If you want to connect to your neighbor's WiFi just ask, they might just give you the code.
dmdufrene 2 years ago
i guessed my neighbor's wifi passcode about 42 times and got it right:] but i only use it as a backup incase my router goes out.
selltaxi 2 years ago
@MarvelousJosh haha gl wep will take years to crack
AnThOnYrox8 2 years ago
Comment removed
aeiounix 1 year ago
This has been flagged as spam show
@AnThOnYrox8
wep is actually quite easy to crack.
You can do it in less than a minute if there is a lot of traffic.
aeiounix 1 year ago
Great video. Thank you!
hottentot 3 years ago
hwy i dont have that option to add another wireless connection.
MoK86 3 years ago
man thinks but i keep loseing DNS errue
samisazerahga 3 years ago
is awesome
vambohal 3 years ago
Use OpenDNS to restrict what websites the open wifi side can access and the bandwidth limit settings in DD-WRT can control bandwidth usage by people on the shared side too.
electronixTech 3 years ago
i would so do this if i could throtlle the bandwidth on the other internerface, i know how to make it work on a transparent proxy to keep ppl off my ip for the most part, its just the limiting the QOS baffels me
princeshawn420 3 years ago
Thanks for that info. I will be applying it to my current WRT54GL or ordered WRT150N soon. Any chance you could give a short explanation of each line's purpose and meaning? Always trying to learn more.
hollrm 3 years ago
DNSMasq Options:
interface=wl0.1
dhcp-option=wl0.1,3,192.168.2.1
dhcp-option=wl0.1,6,192.168.1.1
dhcp-range=wl0.1,192.168.2.100,192.168.2 .200,1440m
Firewall Commands
iptables -I INPUT -i wl0.1 -m --state NEW -j logaccept
iptables -I FORWARD -i wl0.1 -o br0 -j logdrop
iptables -I FORWARD -i br0 -o wl0.1 -j logdrop
dwise82 3 years ago
As several others mentioned, the text commands are not readable. we cannot apply this technique without them. Will you post them clearly for us please?
hollrm 3 years ago
Sharing your wireless with anybody is foolish. They do something wrong, and you get blamed for it because its your IP. Let alone the fact they would be hogging your bandwidth which usually is bad enough as it is by yourself.
tbc93 3 years ago
i have question..
i am sharing my internet connection to my friends over LAN, initially, my modem connection does appear on my friends PCs on the top of LAN connection on "Network Connection" window..it titled as "GSM on ME"
but, recently i dont know why, it doesnt appear anymore on their's PCs..and it make their connection much slower compared to before..But my connection remain as i am a main..pls help me..
sukkee3x 3 years ago
Don't know how many times i need to submit a comment before it gets saved, but I added the rules to the info on the video - sorry it took so long.
dwise82 3 years ago
i have question..
i am sharing my internet connection to my friends over LAN, initially, my modem connection does appear on my friends PCs on the top of LAN connection on "Network Connection" window..it titled as "GSM on ME"
but, recently i dont know why, it doesnt appear anymore on their's PCs..and it make their connection much slower compared to before..But my connection remain as i am a main..pls help me..
sukkee3x 3 years ago
Please share with us what is the line you write in the command line
Josifbg 3 years ago
I would like to second this motion. What are your firewall rules you paste in?
andguent 3 years ago
i have 2 questions
1. do i have to have my wireless sender as dd wrt for this to work? or can i just put my wireless reciever on dd wrt?
2.when i go to download the firmware, it shows like 10 different things to downloads and it says only one is the firmware.. is this the right firmware for my router, or do i need to find some other firmware?
MrBucket51 3 years ago
You have to turn on wireless security. Its called WEP or WPA. You have to configure it through your wireless router, and set a password.
dwise82 3 years ago
Yeah but how do i make my wirless secured so other ppl in my appartment caint use it but my family computers can Eg. moms laptop dads laptop brothers laptop andm y computer?
SomeOne247 3 years ago